Upgrading the Infrastructure Management server in the standalone mode using the wizard

Where you are in the Upgrade process


To upgrade the TrueSight Infrastructure Management server

Do the following:

  1. Log in to the host computer on which you want to upgrade the Infrastructure Management Server, and delete all the files from the temporary directory: 

    • (Windows) %temp%
    • (Linux) /tmp

  2. Extract the downloaded zip files (the upgrade installer) to a temporary location outside the following location to avoid any file sharing conflicts:

    • (Windows) C:\Program Files
    • (Linux) /opt

    Failed to execute the [excerpt-include] macro. Cause: [Error number 2 in 0: No wiki with id [confluencePage:page] could be found]. Click on this message for details.

  3. (Linux) Apply executable rights to all the installation files by running the following command: 

    chmod -R 755 installationDirectoryFolderName 

    installationDirectoryFolderName is the name of the folder that contains all the installation files.

    For example, chmod -R 755 Disk1

  4. (Linux) If you are upgrading as a non-root user, ensure that you start a new session to run the upgrade. Do not use the su command to start a non-root session.

  5. (Linux) Perform the following to archive the old installation files including the user apps, PERL libraries, and any other customization:

    1. Run the pw system stop command to stop the TrueSight Infrastructure Management server.
    2. Tar the /usr/pw directory and place the resulting file in a secure location such as on another server, another file partition, or a directory that lies above /usr/pw.
    3. Save the Crontab entries (especially the database archive entry).
    4. Restart the TrueSight Infrastructure Management Server by using the pw system start command.
    5. Save any custom Apache settings.

  6. (Linux) Run one of the following commands to set the DISPLAY environment to enable the installation program UI to launch:

    • export DISPLAY=targetHostName:0.0
    • setenv DISPLAY targetHostName:0.0

    targetHostName is the name of the computer on which you want to display the installation program UI.


  7. Navigate to the Disk1 directory of the extracted folder, use one of the following options to run the installer.BMC recommends that you run the installer by using install.cmd and not setup.exe.You must right-click on install.cmd and select Run as administrator.
  8. Review the welcome page, and click Next.
  9. Read the license agreement, agree to the terms, and click Next.

  10. On the Upgrade Confirmation page, click Yes, and click Next. The upgrade routine checks the system to see that it meets the upgrade prerequisites, and displays any errors that it discovers. Correct these errors before proceeding with the upgrade.

  11. (Applicable only if you are upgrading from TrueSight Infrastructure Management 10.7) The installer detects the FQDN of the host computer and populates the FQDN field automatically. Confirm this, and click Next. 
    If you modify the FQDN:

    • Do not manually type any IP address in the FQDN field. 
    • Do not leave this field empty.
    • Ensure that the TrueSight Infrastructure Management server FQDN is accessible from other BMC products.

  12. In the Cloud-vista enabled environment, the Configuring TrueSight Infrastructure Management environment deployment information screen is displayed. Provide the following details, and click Next.

    Select any one of the following options based on your TrueSight Infrastructure Management environment.

    • Single Server Environment Installation: Upgrades the TrueSight Infrastructure Management server as a standalone server.
    • Multiple Server Environment Installation: Upgrades the TrueSight Infrastructure Management server as following:
      • BMC TrueSight Infrastructure Management Central Server: Upgrades this instance as a central server.
      • BMC TrueSight Infrastructure Management Child Server: Enter the following Server Router details:

    Field

    Description

    Host Name/IP Address

    FQDN name and IP address of the Central Server Router. FQDN name comprises the host name and the domain name.

    Protocol

    Protocol with which to communicate to the Central Server Router. It can be either HTTP or HTTPS protocol.

    Port

    Port number with which to communicate to the Central Server Router. The default HTTP ports are 80 (Windows) and 8080 (Linux). The default HTTPS ports are 443 (Windows) and 8043 (Linux).

  13. On the Configuring KB Migration Path page, if you have already migrated customized KB definitions to the new standard 11.3.01 KB, select Yes, and browse to the path of the customized KB directory.

    The file path should follow this hierarchy structure:
    \topLevelDirectory\mergedKB\server\etc\cellName , where \server\etc\cellName is the standard sub-directory.

    Warning

    If you have KBs to migrate but have not done so, pause the upgrade process and migrate them before proceeding. See Migrating the configuration of Infrastructure Management cells.

    During the upgrade, the routine copies the KB under the \mergedKB\server\etc\cellName  path and overwrites the KB in the default  installationDirectory \pw\server\etc\cellName path.

  14. Review the installation details, click Install, and click Next.

  15. Select View Logs to open the installation logs, and click Done.

    After you successfully upgrade the TrueSight Infrastructure Management server, the following folder is created under the installation directory, in the BMC Software folder. You can manually delete the files if you do not want them.

  16. Run the following command to verify that the Infrastructure Management Server is upgraded successfully:

    (Windows) # pw system status
    (Linux)# pw system status

    A list of pw server processes is displayed.

    (Windows) Sample list

    ------------------------
    Servers/Daemon Processes
    ------------------------
    services 4820
    httpd 6152
    jserver 10660
    pronet_agent 4680
    pronet_cntl 3968
    tunnelproxy 7792
    rate 3976
    dbsrv 6560
    mcell 4952
    pserver 4217

    (Linux) Sample list

    ------------------------
    Servers/Daemon Processes
    ------------------------
    pronet_agent 21256
    services 21046
    httpd 10069 21446 24238 28619 30746
    jserver 21940
    mcell 20930
    pronet_cntl 21381
    tunnelproxy 21660
    rate 21540
    oracle Running on <host name>:<port number>

    If errors occur, restart the BMC TrueSight Infrastructure Management Server by running the following command:

    (Windows)# pw system start
    (Linux) # pw system start

  17. If you have imported custom certificates for TrueSight Infrastructure Management server, ensure that you edit the custom certificate and key entries in the httpd-ssl.conf file, once you upgrade the TrueSight Infrastructure Management server. For detailed instructions, see Implementing private certificates in the TrueSight Infrastructure Management.
  18. If you have customized service management data in the di_models.baroc file present in the <Infrastructure Management Server Install Directory>\pw\server\etc directory, copy the publishing server kb from the backup directory to the <Infrastructure Management Server Install Directory>\pw\server\etc\<psname> directory.

Important

The system requirements are validated every time you restart the host computer or product services. If the system requirements are not met, the product services are not started. To force-start the product services, see Starting and stopping the TrueSight Operations Management components.

Troubleshooting upgrade issues

If you face issues during the upgrade, see Troubleshooting an Infrastructure Management deployment.


Next step in the Upgrade process

Step 4 Phase B — Now that you have successfully upgraded the Infrastructure Management Server, you must upgrade the Integration Service and remote cells.

 

Tip: For faster searching, add an asterisk to the end of your partial query. Example: cert*