Copying the required TEXT files to the VMSECURE 191 minidisk

Use the following procedure to copy the required TEXT files to the VMSECURE 191 minidisk:

1. Log off the VMSECURE machine and link to the VMSECURE 191 MDISK in write mode:

   >force vmsecure
   USER DSC   LOGOFF AS  VMSECURE USERS = 25FORCED BY MAINT710
   Ready; T=0.01/0.01 10:48:02
   >link vmsecure 191 1 mr
   Ready; T=0.01/0.01 10:48:08
   >acc 1 f   
   Ready; T=0.01/0.01 10:48:13
   
   >pipe COMMAND LIST CZAVS* TEXT A|specs /COPYFILE/ 1 w1.3 nw /= = F (OLDDATE REPLACE/ nw | COMMAND
   Ready; T=0.01/0.01 16:31:46

2. Update the product configuration as follows:

   >copy product config f = config-o f ( oldd
   Ready; T=0.01/0.01 11:43:24

3. Using XEDIT of the product configuration, search for the line that contains USEREXIT AUDIT. Change the contents of that line as follows:

   USEREXIT AUDIT    CZAVSST0
4. FILE your changes.

5. Start the VMSECURE machine as follows:

   >rel f(det
   11:45:36 DASD 0001 DETACHED
   Ready; T=0.01/0.01 11:45:36
   >xautolog vmsecure
   11:45:39 Command accepted
   Ready; T=0.01/0.01 11:45:39
   11:45:39 AUTO LOGON  ***   VMSECURE USERS = 21BY MAINT710
   11:45:39 HCPCLS6056I XAUTOLOG information for VMSECURE: The IPL command is verified by the IPL command processor.

6. Start the CZAVSCT0 machine, XAUTOLOG CZAVSCT0, as follows:

   >xautolog CZAVSCT0
   13:34:35 Command accepted
   Ready; T=0.01/0.01 13:34:35
   13:34:35 AUTO LOGON  ***       CZAVSCT0 USERS = 25    BY MAINT710
   13:34:35 HCPCLS6056I XAUTOLOG information for CZAVSCT0: The IPL command is verified by the IPL command processor.

7. Ensure that CZAVSCT0 is connected to the  z/OS side, and the IP address and port that you set up.

   >netstat conn
   VM TCP/IP Netstat Level 710       TCP/IP Server Name: TCPIP
   
   Active IPv4 Transmission Blocks:                                             
   
   User Id  Conn    Local Socket            Foreign Socket          State
   ---- --  ----    ----- ------            ------- ------          -----
   FTPSERVE 1015    *..FTP-C                *..*                    Listen     
   INTCLIEN 1024    *..TELNET               *..*                    Listen     
   INTCLIEN 1018    172.24.44.91..TELNET    172.28.179.214..59061   Established
   INTCLIEN 1021    172.24.44.91..TELNET    172.28.182.59..50869    Established
   INTCLIEN 1002    172.24.44.91..TELNET    172.28.182.59..55925    Established
   SMTP     1022    *..SMTP                 *..*                    Listen     
   SMTP     UDP     *..1024                 *..*                     UDP       
   PERFSVM  1025    *..88                   *..*                    Listen     
   SERVERT  1019    *..8192                 *..*                    Listen     
   CZAVSCT0 1020    172.24.44.91..1198      172.24.48.140..8196     Established
   
   Active IPv6 Transmission Blocks: None
   
   Ready; T=0.01/0.01 13:36:58

8. Update AUTOLOG1 so that the CZAVSCT0 is started at IPL:

   >link autolog1 191 1 mr
   Ready; T=0.01/0.01 13:51:56
   >acc 1 f
   Ready; T=0.01/0.01 13:51:58
   >copy profile exec f  = exec-old f ( oldd
   Ready; T=0.01/0.01 13:52:07

9. After the Customer processing can be added here heading, add the following lines:

   "PIPE CP SLEEP  30 SEC"   
   "PIPE CP XAUTOLOG CZAVSCT0"

10. FILE your changes as follows:

    >rel f(Det
    13:57:13 DASD 0001 DETACHED
    Ready; T=0.01/0.01 13:57:13