Applying feature packs or fix packs on the Integration Service and Remote Cell in the standalone mode silently

Where you are in the Applying-feature-packs-or-fix-packs process

Feature packs and fix packs contain a full installation of the Infrastructure Management Integration Service.

If you have already installed an earlier version of the Integration Service, you can upgrade it. If not, you can install a fresh version of the Integration Service.

As a best practice, BMC recommends that both the Infrastructure Management server and the Integration Service are of the same version.

To install a fresh version of the remote Integration Service or remote cell

To perform a fresh installation of the Integration Service or remote cell silently, see Installing-the-Integration-Service-silently.

To upgrade an existing remote Integration Service or remote cell

To upgrade the Integration Service silently, perform the following steps:

To customize the options file

  1. Navigate to the downloaded TSIMAgent.zip file and extract its contents. 
  2. Open the bmc_tsim_is_upgrade.options file in a text editor.

  3. Under Product Install Location, specify a valid directory for the Integration Service or remote cell:

    -P installLocation=<INSTALL DIR>

    <INSTALL DIR> is the installation location.

    (Windows)-P installLocation=C:\Program Files\BMC Software\TSIMAgent
    (Linux)-P installLocation=/opt/bmc/TSIMAgent

  4. Under User Input Properties, enter the Integration Service and remote cell installation configuration information.

    -J name=value

    name is the name of the parameter
    value is the value for the parameter

    -J OLD_CELL_INSTALL_LOCATION=C:\Program Files\BMC Software\TSIMAgent-J OLD_INSTALL_LOCATION=C:\Program Files\BMC Software\TSIMAgent

    -J IS_CELL_UPGRADE=true
    -J IS_I_S_UPGRADE=true

    The [confluence_table-plus] macro is a standalone macro and it cannot be used inline.
    Consider the following scenarios with example parameters:

    The [confluence_table-plus] macro is a standalone macro and it cannot be used inline.

  5. Post-installation, if you manually set the cell to high-availability mode, set the value of the following parameter to true

    -J HA_MODE_SELECTED=<false/true> 

  6. (Optional) If you have already migrated customized KB definitions to the new standard 11.0 KB, set the value of the MIGRATED_KB parameter to true and provide the path of the customized KB directory: 

    -J MIGRATED_KB=<true/false>
    -J MIGRATED_KB_HOME=<KB migration path>

    The [confluence_table-plus] macro is a standalone macro and it cannot be used inline.

To install the Fix Pack on the Integration Service and remote cell silently on Microsoft Windows

  1. Open a command prompt with the Run as administrator option. Navigate to the TSIMAgent\Disk1 folder that contains the install.cmd file.

  2. Run the following command to install the Fix Pack on the Integration Service and remote cell by using the bmc_tsim_is_upgrade.options file:
    install.cmd -i silent -DOPTIONS_FILE="<fullyQualifiedPath>\bmc_tsim_is_upgrade.options"
    where fullyQualifiedPath indicates the complete path where you have saved the bmc_tsim_is_upgrade.options file. The path must be enclosed within double quotes.

    install.cmd -i silent -DOPTIONS_FILE="C:\Temp\bmc_tsim_is_upgrade.options"Installation-related information is not displayed on the console when silent installation begins. However, installation occurs in the background. The installation progress is logged in a temporary folder during installation. Navigate to the Temp folder, and view the tsim_agent_install_log.txt file.

To install the Fix Pack on the Integration Service and remote cell silently on Linux

Note

If you are installing the Fix Pack as a non-root user, ensure that the S81pronto.<User_ID>.<Agent_Instances> file exists in the /etc/rc.d/rc<Runlevel_Directory>.d folder. If the file does not exist in this folder, the installer stops and you need to manually copy the file from the /pw/pronto/bin folder as a root user.

User_ID - User ID of the logged in user

Agent_Instances - Number of Integration service instances on the computer

Runlevel_Directory - Number of runlevel directory

  1. Open a command prompt. Navigate to the TSIMAgent\Disk1 folder that contains the install.sh file.

  2. Run the following command to install the Fix Pack on the Integration Service and remote cell by using the bmc_tsim_is_upgrade.options file:

    ./install.sh -i silent -DOPTIONS_FILE="<fullyQualifiedPath>/bmc_tsim_is_upgrade.options"

    where fullyQualifiedPath indicates the complete path where you have saved the bmc_tsim_is_upgrade.options file. The path must be enclosed within double quotes.

    ./install.sh -i silent -DOPTIONS_FILE="/tmp/bmc_tsim_is_upgrade.options"Installation-related information is not displayed when silent installation begins. However, installation occurs in the background. Open /tmp or /var/tmp and view the tsim_agent_install_log.txt file for the installation progress details.

To configure the remote Integration Service or remote cell after installing the Fix Pack

Migrate Knowledge Bases for custom cells

The Fix Pack installer upgrades and migrates the cell created by the installer. For custom cells that are created manually, the installer upgrades the cell binaries but does not migrate the KBs.

To migrate the KBs for custom cells, perform the following steps:

  1. Follow the instructions at Using-the-mmigrate-utility.

  2. Compile and restart the custom cells. For more information, see Compiling a Knowledge Base - mccomp

Reinstall the pproxsrv service

If you installed the pproxsrv service on the remote Integration Server for configuring the HP-OM and Tivoli adapters, the Integration Service installer removes the pproxsrv service when you upgrade the Integration Service. The pns.reg file entries are also removed.

After upgrading the Integration Service, perform the following steps:

  1. From the pw command prompt window, run the following command:
    pproxsrv -install -p <port number> -m
  2. Load the pns.reg file.

Copy the S81pronto file

If you installed or upgraded the Integration Service on Linux as a non-root user, perform the following step:

Have an administrator of the Integration Service host machine copy the S81pronto.xxxx file from installedDirectory/pw/pronto/bin to the /etc/rc.d/rc5.d directory.

The S81pronto.xxxx file is needed to automatically start the Integration Service after a restart of the host machine.

Reconfigure the remote HA primary cell on SUSE Linux Enterprise Server

Perform the following steps after upgrading the remote cells in a high availability SUSE Linux Enterprise Server environment.

  1. Stop the primary and secondary remote cells, if they are running.
  2. Perform the following steps on the primary and secondary remote cells:
    1. Rename the bin folder located under the $MCELL_HOME folder to bin_64.
    2. Rename the bin_32 folder located under the $MCELL_HOME folder to bin.
  3. Start the secondary remote cell, followed by the primary remote cell.
  4. Run the following mposter commands on the primary remote cell only:
    1. mposter -q -n <cell name> -d -a <time zone> -b “description='(UTC+00:00) UTC';tzid='UTC';utc_offset=0;dst_offset=0”
    2. mposter -q -n <cell name> -d -a <time zone> -b “description='(UTC+00:00) GMT';tzid='GMT';utc_offset=0;dst_offset=0”

Note

You can ignore any warnings related to mquery for DDEN_MATCH_TABLE.

(Optional) To configure the Integration Service and PATROL Agent to enable TLS communication

The Integration Service supports the TLS protocol with SHA-256 certificate support on the PATROL Agent to Integration Service communication channel. This requires the BMC PATROL Agent 10.0 or later.

After upgrading the Integration Service, perform the following steps to enable the Integration Service and PATROL Agent communication to be TLS-compliant.

UNIX

  1. Stop the Integration Service by running the following command: 

    pw is stop
  2. Navigate to the <Integration Service installation directory>/TSIMAgent/pw/patrol/common/security/config_v3.0 directory.

  3. Run the following command:

    #Syntax ./set_unset_tls_IS.sh <$BMC_ROOT> <SET_TLS;UNSET_TLS> <security_level>  
    #Example $set_unset_tls_IS.sh "/opt/TSIMAgent/pw" SET_TLS 3 
  4. Modify the bppmpis.plc file from the /etc/patrol.d/_opt_bmc_TSIMAgent_pw/security_policy_v3.0 directory with the following changes:

    1. At the end of the server section, add the following entries :

      service = SSL
      provider = bmcsslNull
      module_name = libbmcnss.so

    2. In the server section, update the identity and password values with the custom certificate values. Example provided below:

      Original:
      password = 17fa9e37f011ec79ef0b32d00cbc98c4f4ca367272714f6b, sample.bin
      identity = server

      Updated:
      password = 67f3e6095553374389b1556afa7e0e4437f6ba5e80295d50acd965c0c603286f, sample.bin
      identity = server - Frisky

  5. Modify the access file from the $BMC_ROOT/pw/patrol/common/security/keys directory and add the highlighted lines:

    For security levels 0-2

    [SSL_SERVER]
    ;
    ALLOW_ACL = *@bmc.com,*@BMC.COM

    NSS_DB_HOME = sql:”server certificate path”

    For security levels 3-4

    [SSL_SERVER]
    ;
    ALLOW_ACL = *@bmc.com,*@BMC.COM

    NSS_DB_HOME = sql:”server certificate path”

    [SSL_CLIENT]
    ;

    NSS_DB_HOME = sql:”client certificate path”

Windows

  1. Stop the Integration Service:
    1. Navigate to Start > Settings > Control Panel.
    2. Double-click the Services icon to launch the Services dialog box.
    3. Locate the BMC TrueSight Infrastructure Management Integration Service in the list of services, highlight, and click Stop. 
    4. Click Yes to close the warning message that is displayed. 
      The status for the Integration Service changes from Started to (blank).
  2. Navigate to the <Integration Service installation directory>\TSIMAgent\patrol\common\security\config_v3.0 directory.

  3. Run the following command:

    #Syntax set_unset_tls_IS.cmd <$BMC_ROOT> <SET_TLS;UNSET_TLS> <security_level> -serverDbPath <serverDbPath> -identity <identity>
    #Example $set_unset_tls_IS.cmd "C:\Program Files\BMC Software\TSIMAgent" SET_TLS 3 -serverDbPath "C:\Certificates\server_db" -identity bmcpatrol

Where to go from here

Step 3 Phase B — Now that you have successfully installed the feature pack or fix pack on the Integration Service and Remote Cell, you must install it on the Infrastructure Management server.

 

Tip: For faster searching, add an asterisk to the end of your partial query. Example: cert*