Configuring the recovery Infrastructure Management Server (SAP SQL Anywhere)


After you configure the remote event cells, you must configure the recovery TrueSight Infrastructure Management Server.

For the Calbro Services example, this section explains steps required to configure the recovery TrueSight Infrastructure Management Server, newyork.calbro.com, for disaster recovery.

Step 1: Stop the primary TrueSight Infrastructure Management Server

To stop the primary TrueSight Infrastructure Management Server, run the pw system stop command on the primary server.

Note

If both primary and secondary servers are on the same network, you must stop Infrastructure Management on the primary server before installing the software on the recovery server. After the recovery server is installed and configured, and then turned off with the pw system stop command, you can restart the primary server with the pw system start command.

If you forget to do this, the installation will fail with an error, because SAP SQL Anywhere Database does not allow two instances with the same name on the same network.

Step 2: Install the TrueSight Infrastructure Management Server on the recovery server

Failed to execute the [excerpt-include] macro. Cause: [Error number 2 in 0: No wiki with id [confluencePage:page] could be found]. Click on this message for details.

Step 3: Edit the hosts files

On the recovery TrueSight Infrastructure Management Server, edit the hosts file with an <aliasName> that is the same alias name as the one on the primary server.

Failed to execute the [excerpt-include] macro. Cause: [Error number 2 in 0: No wiki with id [confluencePage:page] could be found]. Click on this message for details.

Step 4: (Windows only) Set the startup type of Infrastructure Management services to manual

Failed to execute the [excerpt-include] macro. Cause: [Error number 2 in 0: No wiki with id [confluencePage:page] could be found]. Click on this message for details.

Step 5: Restart the computer with the recovery TrueSight Infrastructure Management Server

Restart the computer with the recovery BMC TrueSight Infrastructure Management Server for the changes to take effect.

Step 6: Stop the recovery TrueSight Infrastructure Management Server

Failed to execute the [excerpt-include] macro. Cause: [Error number 2 in 0: No wiki with id [confluencePage:page] could be found]. Click on this message for details.

Step 7: End additional processes

If the following processes are running on your computer, end the processes.

  • (Windows) Pproxsrv.exe and Pwtray.exe
  • (Linux) Pproxsrv

Step 8: Copy the configuration files

Copy the entire \pw directory from the primary TrueSight Infrastructure Management Server to the \pw directory of the recovery TrueSight Infrastructure Management Server.

Note

BMC recommends that you use any third-party file synchronization and backup software to copy the \pw directory because traditional copying can result in any unexpected failure.

Step 9: Clear all the log files

On the recovery TrueSight Infrastructure Management Server, navigate to the \pw\pronto\logs directory, and move all the log files to a backup directory.

Step 10: Start the recovery TrueSight Infrastructure Management Server

Failed to execute the [excerpt-include] macro. Cause: [Error number 2 in 0: No wiki with id [confluencePage:page] could be found]. Click on this message for details.

Failed to execute the [excerpt-include] macro. Cause: [Error number 2 in 0: No wiki with id [confluencePage:page] could be found]. Click on this message for details.

Step 11: Validate the configuration

Failed to execute the [excerpt-include] macro. Cause: [Error number 2 in 0: No wiki with id [confluencePage:page] could be found]. Click on this message for details.

Step 12: Stop the recovery TrueSight Infrastructure Management Server

Failed to execute the [excerpt-include] macro. Cause: [Error number 2 in 0: No wiki with id [confluencePage:page] could be found]. Click on this message for details.

Note

For any licensing issues or problems, contact BMC Customer Support.

Step 13: Restart the primary TrueSight Infrastructure Management Server

To restart the primary TrueSight Infrastructure Management Server, run the pw system start command.

Note

BMC recommends running the pw alarmsynccommand to synchronize the database and the impact management cell database after the recovery.

Related topic

Worksheet-to-configure-disaster-recovery-for-Infrastructure-Management-Oracle

 

Tip: For faster searching, add an asterisk to the end of your partial query. Example: cert*