Validating traffic capture on an Analyzer


After you have deployed a Real User Analyzer and established a traffic data feed to a Real User Collector, the Analyzer should process the collected traffic. Perform the following tasks to verify that the traffic is being processed correctly:

To ensure that the Analyzer is receiving traffic from one or more Collectors

  1. In the Analyzer interface, select Administration > Data flow settings > Analyzer & Collectors management.
  2. Select Last 60 minutes as the time frame and verify that the first graph shows that some traffic has been received. 

    Last60minutes.png
  3. If you have multiple Collector feeds configured, verify that the other graphs are showing traffic being sent from each Collector. For more information, see Establishing-traffic-data-feeds-between-an-Analyzer-and-a-Collector.

To ensure that reference lists values are the same on an Analyzer and Collector

Perform the following steps on both the Analyzer and the Collector to verify that the same values are listed for the Host only and Server IP references lists:

Failed to execute the [excerpt-include] macro. Cause: [Error number 2 in 0: No wiki with id [confluencePage:page] could be found]. Click on this message for details.

For information about tapping point placement, see Traffic-capture-and-tapping-points.

Related topic

Verifying-the-initial-APM-system-configuration

 

Tip: For faster searching, add an asterisk to the end of your partial query. Example: cert*