HP 3PAR Storage Discovered Information

This page details the storage information collected for each of the supported HP 3PAR Storage Systems discovered in your IT infrastructure.

Storage Systems Information
Hardware Container Information
Storage Devices Information
Storage Processors Information
IP Addresses Information
Network Interfaces Information
Front End FC Ports Information
Storage Pools Information
Storage Volumes Information
Disk Drives Information
Storage Connection Information

Storage Systems Information

To access the collected information for HP 3PAR Storage systems:

From the Home page, locate the Quick View section and click the Storage System icon to display the list of the discovered storage systems.
In the Storage System list, double-click the HP 3PAR storage system you wish to access.

The table below lists the System Storage Information as discovered and displayed in the BMC Discovery console.

Storage System Information	Description
Name	The name of the storage system.
Type	The type name of the storage system.
Client Access Types	The ways in which a client host can access the storage that this system is providing. This may be SAN, NAS, or SAN and NAS.
Vendor	The storage system vendor.
DNS Domain	The Domain Name System (DNS).
Model	The model name.
Serial Number	The storage system serial number.
World Wide Node Name	The Unique 64-bit identifier assigned to each Fiber Channel node process.
Status	The operational status of the storage system. To simplify the reading, the status values are categorized as OK, Degraded, Failed, or Offline.
Status Detail	The operational storage system status as exposed by the device's vendor.
Software Version	The version number of the software.
Hardware Container	The name of the hardware container (node) for the storage system.
Total Disk Space	The total available space in the storage system in bytes.
Total Capacity	The total capacity of the storage system in bytes.
Total Consumed Capacity	The total space consumed in the storage system.
Percentage Consumed	The percentage of space actually consumed in the storage system.
Total Available Capacity	The total capacity not consumed in the storage system in bytes.
Total Oversubscribed Capacity	The total space oversubscribed in the storage system in bytes.
Available Capacity	The total capacity available for storage in the storage system.
Storage Device	Link to the storage device page. Refer to the Storage Device Information section for details.
Storage Processors	A summary table showing the storage processors in the storage system. For each processor the following information is displayed: Processor Identifier Vendor Model Firmware Number of FC Ports To see the storage processor page, click the corresponding table row. Refer to the HP 3PAR Storage Discovered Information section for details.
Contained Storage Pools	Displays the number of related storage pools. This is also a link to the Storage Pool List page. To see the storage pool page, click the corresponding table row.
Storage Volumes	Displays the number of related storage volumes. This is also a link to the Storage Volume List page. To see the storage volume page, click the corresponding table row .
Disk Drives	Displays the number of related disk drives. This is also a link to the Disk Drive List page. To see the storage pool page, click the corresponding table row.
IPv4 Addresses	List of IPv4 addresses used by the storage system.
Network Interfaces	List of the network interfaces related to the storage system.

Hardware Container Information

A Hardware Container in BMC Discovery is a node that regroups all the available information about the discovered hardware components for a storage system.

To access the collected information for hardware containers click the Hardware Container link available from the Storage System page.

The table below lists the Hardware Container Information as discovered and displayed in the BMC Discovery console.

Hardware Container (Main)	Description
Name	The name of the hardware container.
Serial Number	The hardware container serial number.
Type	The type of the hardware container: Main System Chassis are containers directly attached to the storage system that regroup Expansion Chassis containers and/or provide access to the discovered hardware components metrics. Expansion Chassis containers are part of a Main System Chassis container and provide access to the discovered hardware components metrics.
Model	The model name of the hardware container.
Hardware Vendor	The name of the hardware container manufacturer.
Storage System Members	For Main System Chassis type only — Link to the storage system(s) related to the hardware container.
Disk Drives	The list of the disk drives that are grouped in the hardware container.
Pattern	Link to the related pattern information.

Storage Devices Information

A Storage device in BMC Discovery represents a storage chassis that has been discovered by a scan of its embedded WBEM/SMI-S provider. This section provides information about the Storage Device on HP 3PAR Storage Systems.

To access the collected information for storage processors:

Click the Infrastructure tab, and then the Storage Systems in the Infrastructure Summary section.
Select a storage system from the list.
Click the Storage Device link in the Storage Device section.

The table below lists the Storage Device Information as discovered and displayed in the BMC Discovery console.

Storage Device Information	Description
Name	The name of the storage device.
Vendor	The storage device vendor.
DNS Domain	The Domain Name System (DNS).
Model	The model name of the storage device.
Serial Number	The storage device serial number.
World Wide Node Name	The unique 64-bit identifier assigned to each Fiber Channel node process.
OS Class	The operating system class.
OS Type	The operating system type.
OS Vendor	The operating system vendor.
Storage Systems	The name of the storage system for this storage pool. This is also a link to the Storage Systems page.
Discovery Access	Provides information about the discovery access nodes created for the storage device.

Storage Processors Information

This section provides information about the storage processors managing data transfer for the selected storage system.

To access the collected information for storage processors:

Click the Infrastructure tab, and then the Storage Systems in the Infrastructure Summary section.
Select a storage system from the list.
Click a Processor Identifier name in the Storage Processors section.

The table below lists the Storage Processors Information as discovered and displayed in the BMC Discovery console.

Storage Processor Information	Description
Processor Identifier	The processor identifier.
Vendor	The hardware vendor.
Model	The model name.
Description	The model description.
Serial	The serial number of the processor.
Firmware	The firmware details.
Storage System	The name of the storage device. This is also a link to the Storage System page.
Front End FC Ports	List of the front-end FC Ports for this processor.

IP Addresses Information

This section provides information about the IP addresses used by the storage system.

To access the collected information for the IP addresses, click the IP Address Link of the Storage System page.

The table below lists the IP Address Information as discovered and displayed in the BMC Discovery console.

IP Address Information	Description
IP Address	The IP address of the storage system node.
Type	The type of IP address.
Netmask	Indicates which part of the IP address is reserved for the network and which part is available for host use.
Broadcast Address	The broadcast address within the subnet.
Network Interface	The network interface related to the IP address.
Storage System	The storage system related to the network interface. This is also a link to the Storage Systems page.

Network Interfaces Information

This section provides information about network interfaces. To access the collected information for network interfaces:

Select the Infrastructure option in the Explore menu, and then the Storage Systems in the Infrastructure Summary section.
Select a storage system from the list.
Click the Network Interface link in the Network Interfaces section to display a list of the network interface associated to the storage system.
Click a Network Interface in the list.

The table below lists the Network Interface Information as discovered and displayed in the BMC Discovery console.

Network Interface Information	Description
Interface Name	The name of the network interface.
MAC Address	Mac Address of the network interface.
IPv4 Addresses	List of IP addresses related to this network interface.
Storage System	The storage system related to the IP address.
Interface Type	The type of interface.

Front End FC Ports Information

This section provides information about the front-end fiber channel ports transmitting data for the selected storage system.

To access the collected information for Frond End Fibre Channel Ports:

Click the Infrastructure tab, and then the Storage Systems in the Infrastructure Summary section.
Select a storage system from the list.
Click a Processor Identifier name in the Storage Processors section.
Click a Port Name in the Front End FC Ports section.

The table below lists the Front End FC Ports Information as discovered and displayed in the BMC Discovery console.

Front End FC Port Information	Description
Port Name	The name of the front end FC port.
WWPN	The World Wide Port Name — Unique serial number of the front end FC port.
Role	The role of the FC port. For example, Front End
Type	The front end FC port type. For example, Fabric (N)
State	The front end FC port state. For example, Operational.
Speed (Gb/s)	The front end FC port speed (in Gbit/s).
Storage Processor	The storage processor for this port. This is also a link to the Storage Processor page.
Exposed Volumes	The volumes exposed through this port. This is also a link to the Storage Volume List page.

Storage Pools Information

This section provides information about the storage pools for the selected storage system.

To access the collected information for storage pools:

Click the Infrastructure tab, and then the Storage Systems in the Infrastructure Summary section.
Select a storage system from the list.
Click the Storage Pools related link in the Storage Pools section to display a list of the storage pools associated to the storage system.
Click a Storage Pool in the list.

The table below lists the Storage Pools Information as discovered and displayed in the BMC Discovery console.

ℹ️ Information not available for EMC Celerra models.

Storage Pool Information	Description
Pool ID	The ID of the storage pool.
Type	The type of the storage pool.
Name	The name of the storage pool.
Capacity	The usable capacity of the storage pool.
Consumed Capacity	The space actually consumed in the storage pool in bytes.
Percentage Consumed	The percentage of space consumed in the storage pool
Available Capacity	The total capacity not consumed in the storage system in bytes.
Subscribed Capacity	The total subscribed capacity in the storage pool.
Configured Volume Capacity	The sum of all mapped volumes.
Oversubscribed Capacity	The total space oversubscribed in the storage pool.
Oversubscription Warning	Indicates whether or not an oversubscription warning is active.
Storage System	The name of the storage system for this storage pool. This is also a link to the Storage Systems page.
Storage Volumes	The name of the storage system for this storage pool. This is also a link to the Storage Systems page.

Storage Volumes Information

This section provides information about the storage volumes for the selected storage system.

To access the collected information for storage volumes:

Click the Infrastructure tab, and then the Storage Systems in the Infrastructure Summary section.
Select a storage system from the list.
Click the Storage Volumes related link in the Storage Volumes section to display a list of the storage volumes associated to the storage system.
Click a Storage Volume in the list.

The table below lists the Storage Volumes Information as discovered and displayed in the BMC Discovery console.

Storage Volume Information	Description
Volume ID	The ID of the storage volume. .
Name	The name of the storage volume .
NAA ID	The Network Address Authority ID.
Mapped	Indicates whether or not the storage volume is mapped.
Thinly Provisioned	Indicates whether the volume are thinly provisioned or not. For example, if the volumes are not thinly provisioned, it displays No.
Encryption	Indicates whether the data encryption is enabled (Yes) or disabled (No).
Visible Capacity	The visible capacity of the storage volume (in GiB).
Consumed From Pool	The capacity consumed from the storage pool related to the storage volume (in GiB).
Consumable Capacity	The consumable capacity in the storage volume (in GiB).
Percentage of Pool Consumed	The percentage of capacity consumed in the storage volume.
Block Size	The block size of the storage volume.
Number of Blocks	The number of blocks of the storage volume.
Consumable Blocks	The number of consumable blocks of the storage volume.
Storage System	The name of the storage system for this storage volume. This is also a link to the Storage Systems page.
Storage Pool	Name of the storage pool for this storage volume. This is also a link to the Storage Pools page.
Storage Consumers	Name of the storage connections related to the storage volume. This is also a link to the HP 3PAR Storage Discovered Information page.

Disk Drives Information

This section provides information about the disk drives for the selected storage system.

To access the collected information for disk drives:

Click the Infrastructure tab, and then the Storage Systems in the Infrastructure Summary section.
Select a storage system from the list.
Click the Disk Drives related link in the Disk Drives section to display a list of the disk drives associated to the storage system.
Click a Disk Drive in the list.

The table below lists the Disk Drives Information as discovered and displayed in the BMC Discovery console.

Disk Drive Information	Description
Name	The name of the disk drive.
Type	The type of the disk drive. For example HDD.
Speed	Speed of the disk drive (in RPM).
Size	The size of the disk drive in bytes.
Vendor	The name of the disk drive vendor. For example, HP.
Model	The model of the disk drive.
Serial Number	The serial number of the disk drive.
Current State	The current state of the disk drive.
Storage System	Name of the storage system for this disk drive. This is also a link to the Storage Systems page.
Free Capacity	(NearLine disk drives only). The amount of space available in the disk drive (in bytes). (Refer to the note below for unit conversion).
Chassis Serial	The serial number of the chassis.
Position	Physical position code of the disk drive in the enclosure.
Number	The number identifying the disk drive in the enclosure.
Encryption	Indicates whether the data encryption is enabled (Yes) or disabled (No).
Enclosure Serial	The serial number of the enclosure.

Free Capacity Unit Conversion

By default, the Free Capacity is reported in bytes, as discovered by the pattern. To convert the free capacity unit in gigabytes or terabytes, perform the following query:

lookup 'xxxxxxxxx' traverse Container:Containment:ContainedDrive:DiskDrive SHOW name, type, speed, size, vendor, model, serial_number, current_state, formatQuantity(capacity, "B1024") as 'Capacity', number, enclosure_serial, formatQuantity(free_capacity, "B1024") as 'Free Capacity', chassis_serial, formatQuantity(free_spare_capacity, "B1024") as 'Free Spare Capacity'. (Where xxxxxxxx is the nodeID of the Storage System).

Storage Connection Information

A Storage connection represents a connection between a storage client (a host using the storage) and a storage volume. The same connection may be linked to multiple volumes representing the client's visibility of multiple storage volumes. The volumes shown are only those that the client is permitted to access. This section provides information about the Storage Connection for the selected storage volume.

To access the collected information for storage connections:

Click the Infrastructure tab, and then the Storage Systems in the Infrastructure Summary section.
Select a storage system from the list.
Click the Storage Volumes related link in the Storage Volumes section to display a list of the storage connections associated to the selected volume.
Select a Storage Volume from the list.
Click a Connection Name in the Storage Consumers section.

The table below lists the Storage Connections Information as discovered and displayed in the BMC Discovery console.

Storage Connection Information	Description
Connection Name	The name of the connection.
Connection Type	The type of storage connection.
Connection Value	A unique identifier for the storage consumer using this connection.
Storage Volumes	The name of any storage volumes visible to the host using this connection.
Consumer Fibre Chanel Port	Information on the Fiber channel port on the host using this connection.