HA-CDP worksheet for upgrades from 7.9.00 with RSSO to 7.9.01 with RSSO

You can upgrade a high availability configuration distribution peer (HA-CDP) after you have upgraded the repository, and the primary CDP. 

If you choose to modify any settings during the HA-CDP upgrade, use this worksheet to record the new settings. The parameters in this worksheet correspond to the parameters in the GUI upgrade panels and the options file. 

Upgrade feature selection panel

Parameter

Default value and notes

Your value

Configuration Distribution Peer

Configuration Distribution Peer


Directory Selection panel

Parameter

Default value and notes

Your value

Destination Directory

The installation directory for the previous installation is displayed.

CDP Connection Details panel

Parameter

Default value and notes

Your value

Web Server Host Name

Fully qualified domain name of the computer where the secondary CDP is installed.

Repository HA Address

Provide the repository IP address and port for communication with the enterprise service bus. Use the following format:

<IPaddress>:<port>

On a machine that has multiple network interface cards (NICs) this must be the IP address that allows access from the CDP and/or the HA-CDP.

The default port is the repository web port plus 10. For example, if the repository port is 28080, the Repository HA address is 28090.

Notes

  • This entry is required for installations/upgrades with embedded RSSO installations. This is not applicable if you are using external RSSO on the CDP.
  • Often multiple IP addresses are detected by the installer (on a machine that has multiple NICs). Verify the default address and port number and replace them if required.

 
CDP HA Address

Provide the CDP IP address and port for communication with the enterprise service bus. Use the following format:

<IPaddress>:<port>

On a machine that has multiple network interface cards (NICs) this must be an IP address that allows access from the repository and/or the HA-CDP.

The default port is the CDP web port plus 10. For example, if the CDP port is 38080, the CDP HA address is 38090.

Notes

  • This entry is required for installations/upgrades with embedded RSSO installations. This is not applicable if you are using external RSSO on the CDP.
  • Often multiple IP addresses are detected by the installer (on a machine that has multiple NICs). Verify the default address and port number and replace them if required.

 
HACDP HA Address

Provide the HA-CDP IP address and port for communication with the enterprise service bus. Use the following format:

<IPaddress>:<port>

On a machine that has multiple network interface cards (NICs) this must be an IP address that allows access from the repository and/or the primary CDP.

The default port is the HA-CDP web port plus 10. For example, if the HA-CDP port is 38080, the HACDP HA address is 38090.

Notes

  • This entry is required for installations/upgrades with embedded RSSO installations. This is not applicable if you are using external RSSO on the CDP.
  • Often multiple IP addresses are detected by the installer (on a machine that has multiple NICs). Verify the default address and port number and replace them if required.

 

CDP Server Auto Start panel

Parameter

Default value and notes

Your value

Do you want to start the server after the installation has completed?

Yes

Installation Choices Summary panel

Parameter

Default value and notes

Your value

Copy Text to Clipboard

Before you install/upgrade the secondary CDP successfully, you can copy the connection details to a clipboard for further use.

Was this page helpful? Yes No Submitting... Thank you

Comments