HA-CDP worksheet for upgrades from 7.7.x, 7.8.x, and 7.9.00 with ASSO to 7.9.01 with RSSO

You can upgrade a high availability configuration distribution peer (HA-CDP) after you have upgraded the repository, and the primary CDP. 

If you choose to modify any settings during the HA-CDP upgrade, use this worksheet to record the new settings. The parameters in this worksheet correspond to the parameters in the GUI upgrade panels and the options file. 

Upgrade feature selection panel

Parameter

Default value and notes

Your value

Configuration Distribution Peer

Configuration Distribution Peer


Directory Selection panel

Parameter

Default value and notes

Your value

Destination Directory

The installation directory for the previous installation is displayed.

Authentication panel

Parameter

Default value and notes

Your value

Install Embedded Remedy SSO
and
Cookie Domain

or

Use External Remedy SSO
and
Remedy SSO URL
Remedy SSO Realm
Admin Password 

Select your authentication option and provide the required information to use it. Choose the same option that you chose for the CDP.

  • Embedded Remedy SSO (the authentication service is installed with the CDP).
    and
    Cookie Domain: Provide the cookie domain (see Installing Remedy Single Sign-On for more information).

    or 
  • External Remedy SSO (this will be the Remedy SSO instance embedded on the repository or the external Remedy SSO that you specified during the repository installation or upgrade).
    and
    Remedy SSO URL: Provide the external Remedy SSO URL in the following format:
    https://<hostname>:<port> 
    For example:

Remedy SSO Realm: Provide the name of the realm on the external Remedy SSO.
If you are using the embedded Remedy SSO on the repository, the realm used by BAO is BAOLocal.

Admin Password: Enter the Admin password to log into the external RSSO instance.

 

CDP Connection Details panel

Parameter

Default value and notes

Your value

Web Server Host Name

Fully qualified domain name of the computer where the secondary CDP is installed.

Repository HA Address

Provide the repository IP address and port for communication with the enterprise service bus. Use the following format:

<IPaddress>:<port>

On a machine that has multiple network interface cards (NICs) this must be the IP address that allows access from the CDP and/or the HA-CDP.

The default port is the repository web port plus 10. For example, if the repository port is 28080, the Repository HA address is 28090.

Notes

  • This entry is required for installations/upgrades with embedded RSSO installations. This is not applicable if you are using external RSSO on the CDP.
  • Often multiple IP addresses are detected by the installer (on a machine that has multiple NICs). Verify the default address and port number and replace them if required.

 
CDP HA Address

Provide the CDP IP address and port for communication with the enterprise service bus. Use the following format:

<IPaddress>:<port>

On a machine that has multiple network interface cards (NICs) this must be an IP address that allows access from the repository and/or the HA-CDP.

The default port is the CDP web port plus 10. For example, if the CDP port is 38080, the CDP HA address is 38090.

Notes

  • This entry is required for installations/upgrades with embedded RSSO installations. This is not applicable if you are using external RSSO on the CDP.
  • Often multiple IP addresses are detected by the installer (on a machine that has multiple NICs). Verify the default address and port number and replace them if required.

 
HACDP HA Address

Provide the HA-CDP IP address and port for communication with the enterprise service bus. Use the following format:

<IPaddress>:<port>

On a machine that has multiple network interface cards (NICs) this must be an IP address that allows access from the repository and/or the primary CDP.

The default port is the HA-CDP web port plus 10. For example, if the HA-CDP port is 38080, the HACDP HA address is 38090.

Notes

  • This entry is required for installations/upgrades with embedded RSSO installations. This is not applicable if you are using external RSSO on the CDP.
  • Often multiple IP addresses are detected by the installer (on a machine that has multiple NICs). Verify the default address and port number and replace them if required.

 

CDP Server Auto Start panel

Parameter

Default value and notes

Your value

Do you want to start the server after the installation has completed?

Yes

Installation Choices Summary panel

Parameter

Default value and notes

Your value

Copy Text to Clipboard

Before you install/upgrade the secondary CDP successfully, you can copy the connection details to a clipboard for further use.