Filter and rule list parameter quick reference
This topic provides a brief description of INC/EXC and SET statements that are used in the FLSTxx and RLSTxx members in the MainView SRM suite of products.
A parameter type (INC/EXC FLST RLST or SET RLST) is designated by X. A blank cell indicates that the parameter is not of that type. Following the table is a complete description of each parameter in alphabetical order.
For an explanation of how to use filter and rule lists, see Using-MainView-SRM-products.
Filter and rule list parameter quick reference
Parameter | INC/EXC FLST/RLST | SET RLST | Description |
|---|---|---|---|
AA_AMODE=xxxx | X |
| Specifies the application mode: MON, WARN, REJ |
AA_APPL=xxxxxxxxxxx | X |
| Specifies the application name (1-50 characters) |
AA_ASTAT=xxxx | X |
| Specifies the application status: MDEL, DEL, ACTV |
AA_AVAIL=nnnnnnnnnn | X |
| Includes or excludes applications based on the total number of bytes that are available in the application |
AA_CDATE=xxxxxxxxxx | X |
| Indicates the date the application was created in the application database in yyyy/mm/dd format |
AA_HSMC=nnnnnnnnnn | X |
| Specifies the total amount of space allocated on DASD for HSM data sets assigned to this application (0-9223372036854775807) |
AA_HSMH=nnnnnnnnnn | X |
| Indicates the largest amount of space allocated on DASD for HSM data sets assigned to this application (0-9223372036854775807) |
AA_KHSM=YES | NO | Y | N | X |
| Indicates if HSM data sets are tracked for this application |
AA_KTEMP=YES | NO | Y | N | X |
| Indicates if temporary data sets are tracked for this application |
AA_KVSAM=YES | NO | Y | N | X |
| Indicates if VSAM data sets are tracked for this application |
AA_LDATE=xxxxxxxxxx | X |
| Contains the date of the last allocation that resulted in one of the application fields being updated in yyyy/mm/dd format |
AA_NVSAMC=nnnnnnnnnn | X |
| Includes or excludes applications based on the total number of bytes that are allocated to non-VSAM data sets in the application |
AA_PERMC=nnnnnnnnnn | X |
| Indicates the total amount of space allocated on DASD for permanent data sets assigned to this application (0-9223372036854775807) |
AA_PERMH=nnnnnnnnnn | X |
| Indicates the largest amount of space allocated on DASD for permanent data sets assigned to this application (0-9223372036854775807) |
AA_PERMM=nnnnnnnnnn | X |
| Indicates the maximum amount of space allowed for permanent data sets assigned to this application (0-9223372036854775807) |
AA_PERMP=nnn | X |
| Indicates the percentage of the permanent data set budget currently being used (0-2147483647) |
AA_PHSM=YES | NO | Y | N | X |
| Indicates if HSM data set allocations are included as part of the permanent data set allocations |
AA_PTEMP=YES | NO | Y | N | X |
| Indicates if temporary data set allocations are included as part of the permanent data set allocations |
AA_PVSAM=YES | NO | Y | N | X |
| Indicates if VSAM data set allocations are included as part of the permanent data set allocations |
AA_TEMPC=nnnnnnnnnn | X |
| Indicates the total amount of space allocated on DASD for temporary data sets assigned to this application (0-9223372036854775807) |
AA_TEMPH=nnnnnnnnnn | X |
| Indicates the largest amount of space allocated on DASD for temporary data sets assigned to this application (0-9223372036854775807) |
AA_TEMPM=nnnnnnnnnn | X |
| Specifies the maximum amount of space allowed for temporary data sets assigned to this application (0-9223372036854775807) |
AA_TEMPP=nnn | X |
| Percentage of the temporary data set budget currently being used (0-2147483647) |
AA_UFLDn-xxxxxxxxxx | X |
| 1-3 application-defined fields |
AA_UNAME=xxxxxxxxxx | X |
| Contains a application-defined name up to 20 characters |
AA_VLCNT=nnnnnnnnn | X |
| Specifies the number of volumes that contain at least one data set included in the application's allocation amounts (0-2147483647) |
AA_VSAMC=nnnnnnnnnn | X |
| Indicates the total amount of space allocated on DASD for VSAM data sets assigned to this application (0-9223372036854775807) |
AA_VSAMH=nnnnnnnnnn | X |
| Indicates the largest amount of space allocated on DASD for VSAM data sets assigned to this application (0-9223372036854775807) |
AA_VSAMM=nnnnnnnnnnn | X |
| Indicates the maximum amount of space allowed for VSAM data sets assigned to this application (0-9223372036854775807) |
AA_VSAMP=nnn | X |
| Indicates percentage of the VSAM data set budget currently being used (0-2147483647) |
AA_WTHRS=nnn | X |
| Specifies a percentage of the budget that can be used by the application before a warning message is issued (0-2147483647 |
AC_ACCCNT=nnnnnnnnnn... | X |
| Specifies a catalog access count in the current Catalog Scan performance interval |
AC_ACCTIM=nnnnnnnnnn... | X |
| Specifies a catalog average access time in the current Catalog Scan performance interval The access time is in microseconds (0.000001 seconds). |
AC_ACCTIMHC=nnnnnnnnnn... | X |
| Specifies the access count from the hour with the highest average access time in the current Catalog Scan performance interval |
AC_ACCTIMHR=hh | X |
| Specifies the hour containing the highest average access time in the current Catalog Scan performance interval |
AC_ACCTIMHW=nnnnnnnnnn... | X |
| Specifies the highest average access time from all hours in the current Catalog Scan performance interval The access time is in microseconds (0.000001 seconds). |
AC_ALI#=nnnnnnnnnn | X |
| Specifies the number of aliases defined in the master catalog with an association to a user catalog |
AC_CAT=xxxxxxxxxx... | X |
| Specifies the catalog name up to 44 characters |
AC_CODE=xxxxxxxx | X | X | Contains the value in the IBM ACCODE field (8-byte value) |
AC_DS#=nnnnnnnnnn | X |
| Specifies the data set entries with an associated alias in the master catalog |
AC_EXTS=nnnnnnnnnn | X |
| Specifies the catalog extents |
AC_MALI#=nnnnnnnnnn | X |
| Specifies a high-water-mark of data set entries. This is from the alias with the highest number of data set entries |
AC_MALIN=xxxxxxxx | X |
| Specifies the name of the alias with the highest number of data set entries |
AC_PUSED=nnn | X |
| Specifies the percent of allocation that is used |
AC_PUSEDT=nnnn | X |
| Specifies the percent of allocation that is used in tenths of a percent |
AC_SIZE=nnnnnnnnnn | X |
| Specifies the catalog total size in tracks |
AC_UALI#=nnnnnnnnnn | X |
| Specifies a count of unique high level qualifiers of the unavailable data set entries |
AC_UDS#=nnnnnnnnnn | X |
| Specifies the data set entries with no associated alias in the master catalog |
ACF2USER=xxxxxxxx | X | X | Specifies the user name from CA ACF2 (24-byte value) |
ACT_ACCUM=NO | HOUR | TOD | HSMDAY | ALL |
| X | Accumulates event and job actions over time and batches the events or job JCL statements |
ACT_COUNT=nnnnn |
| X | Specifies the maximum to the number of records to which actions can be taken |
ACT_EVENTID=xxxxx |
| X | Specifies an event to issue for each record in the SET result group |
ACT_JOB=xxxxxxxx |
| X | Specifies the name of a member containing skeleton JCL to be submitted using the Skeleton Tailoring facility |
ACT_SUM_FLD=fldname |
| X | Causes a running total of the specified field to be maintained for each record against which a specified action is taken |
ACT_SUM_LIM=nnnnnnnnnnnnnn |
| X | Limits the number of records to be included in any specified action (0-9223372036854775807) |
ACT_TOD=hhmm |
| X | Specifies when accumulated tailored skeleton JCL is submitted or saved to a data set |
AD_ALVL1=xxxxxxxxxxxxxxxx | X |
| Contains the application name (Application Level 1) |
AD_ALVL2=xxxxxxxxxxxxxxxx | X |
| Contains the application name (Application Level 2) |
AD_ALVL3=xxxxxxxxxxxxxxxx | X |
| Contains the application name (Application Level 3) |
AD_ALVL4=xxxxxxxxxxxxxxxx | X |
| Contains the application name (Application Level 4) |
AD_BASE=clusterName | X |
| Indicates the base name of the data set |
AD_BKUPCATS=Y|N | X |
| Indicates if one or more backup versions exist for a data set that was cataloged at the time of backup |
AD_BKUPDATE=yyyy/mm/dd | X |
| Contains the most recent backup date for the data set |
AD_BKUPDAYS=nnnnnnnnnn | X |
| Contains the number of days since the last backup was performed on the data set |
AD_BKUPSIZE=nnnnnnnnnn... | X |
| Contains the backup space usage for the data set (in bytes) |
AD_BKUPTOTS=nnnnnnnnnn | X |
| Contains the number of backup versions that exist for the data set |
AD_BKUPUNCS=Y | N | X |
| Indicates if one or more backup versions exist for a data set that was uncataloged at the time of backup |
AD_BKUPWDAY=nnnnnnnnnn | X |
| Contains the number of work days since the last backup was performed on the data set |
AD_BLKEF=nnn | X |
| Specifies the percentage of blocking efficiency (0-100) |
AD_BLKEFT>nnnn | X |
| Specifies the blocking efficiency of the data set in tenths of a percent (0-1000) |
AD_BLKSZ=nnnnn | X |
| Contains physical block size or VSAM control interval size for the data set |
AD_BLKTR=nnnnnnnnnn | X |
| Contains the number of physical blocks that will fit on one track |
AD_CASPL=nnnnnnnnnn | X |
| Contains the number of VSAM control area splits performed on the data set |
AD_CAT=x | X |
| Contains the catalog status of the data set' |
AD_CDATE=xxxxxxxxxx | X |
| Contains the creation date of the data set in yyyy/mm/dd format |
AD_CDAYS=nnnnn (PTF BPG7604 applied) | X | Specifies the number of days since the data set was created (0-99999) | |
AD_CHG=YES | NO | Y | N | X |
| Indicates if the data set has been opened for update since its last backup |
AD_CISPL=nnnnnnnnnn | X |
| Contains the number of VSAM control interval splits performed on the data set |
AD_COMPR=YES|NO|Y|N | X |
| Indicates if the data set is compressed |
AD_DAYS=nnnnnnnnnn | X |
| Contains the number of days since the data set was opened |
AD_DCLAS=xxxxxxxx | X |
| Contains the SMS-assigned data class or one of the following values for the data set: NONE, DUPLIC, UNDET |
AD_DCVALID=YES | NO | Y | N | X |
| Indicates whether the data class to which the data set is assigned is valid |
AD_DIRBA>nnnnnnnn (PTF BPG7583 applied) | X | Specifies the number of allocated PDS data set directory blocks (1 – 16777215) | |
AD_DIRBF>nnnnnnnn (PTF BPG7583 applied) | X | Specifies the number of free PDS data set directory blocks (0 – 16777215) | |
AD_DOCC=nnn | X |
| Contains the occupancy percentage (0 – 100) |
AD_DOCCT>nnnn | X |
| Specifies the device occupancy percentage in tenths of a percent (0 – 1000) |
AD_DSN=xxxxxxxxxx | X |
| Specifies the data set name |
AD_DSORG=xxxx | X |
| Contains the data set file organization and access method used to manage the data set |
AD_DSTYP=xxxx | X |
| Specifies the data set type |
AD_EXTS=nnnnnnnnnn | X |
| Contains the number of extents occupied by the data set on the volume |
AD_EXTSB>nnnnnnnnnn | X |
| Specifies the number of extents occupied by the data set on a non-EAV volume or in the BAS area of an EAV volume |
AD_EXTSE> nnnnnnnnnn | X |
| Specifies the number of extents occupied by the data set in the EAS area of an EAV volume |
AD_GROUP=xxxxxxxxxx | X |
| SMS storage group name displayed if the AUTODS function is associated with an AUTOPOOL GROUP= function |
AD_LDATE=xxxxxxxxxx | X |
| Contains the last date the data set was opened in yyyy/mm/dd format |
AD_LRECL=nnnnn | X |
| Contains the maximum record length for the data set |
AD_MCLAS=xxxxxxxx | X |
| Contains the SMS-assigned management class or one of the following values: NONE, DUPLIC, UNDET |
AD_MCVALID=YES | NO | Y | N | X |
| Indicates whether the management class to which the data set is assigned is valid |
AD_MNTTYPE=mountType | X |
| Indicates the mount type of the volume on which the data set exists |
AD_MULTD=YES | NO | Y | N | X |
| Indicates if the AUTODS record was used in the creation of a multivolume summarization record |
AD_POOL=xxxxxxxx | X |
| Specifies the pool name displayed if the AUTODS function is associated with an AUTOPOOL POOL= function |
AD_POOLT=S | P | X |
| Contains the pool type, S for subpool or P for user pool |
AD_PUSED=nnn | X |
| Contains the percentage of allocation that is used (0-100) |
AD_PUSEDT>nnnn | X |
| Specifies the percentage in tenths of allocated space to used space in the data set (0-1000) |
AD_REBLK=YES | NO | Y | N | X |
| Contains the reblockable indicator, which determines whether the data set can be reblocked by the system when being moved from one device geometry to another |
AD_RECFM=xxxxx | X |
| Contains the data set record format |
AD_SCLAS=xxxxxx | X |
| Contains the SMS-assigned storage class or one of the following values: NONE, DUPLIC, UNDET |
AD_SCVALID=YES | NO | Y | N | X |
| Indicates whether the storage class to which the data set is assigned is valid |
AD_SIZE=nnnnnnnnnn | X |
| Contains the data set size in kilobytes (one kilobyte equals 1024 bytes) on the volume |
AD_SIZEB>nnnnnnnnnn | X |
| Specifies the amount of data set space that is allocated on a non-EAV volume or in the BAS area of an EAV volume in kilobytes (one kilobyte equals 1024 bytes) |
AD_SIZEE>nnnnnnnnnn | X |
| Specifies the amount of data set space that is allocated in the EAS area of an EAV volume in kilobytes (one kilobyte equals 1024 bytes) |
AD_SMSI=xx | X |
| Specifies the SMS status of the volume |
AD_STORGRP=xxxxxxxx |
| X | SMS storage group name displayed if the AUTODS function is associated with an AUTOPOOL GROUP function (1-8 characters) |
AD_STRPC=nnnnn | X |
| Specifies the number of data set stripes |
AD_SUL=xxx (PTF BPG7583 applied) | X | Specifies the standard user label indicator in DASD. Indicates one of the following values: YES|Y, NO|N | |
AD_TRKSA=nnnnnnnnnn | X |
| Contains the number of tracks allocated |
AD_TRKSAB>nnnnnnnnnn | X |
| Specifies the number of tracks allocated on a non-EAV volume or in the BAS area of an EAV volume |
AD_TRKSAE>nnnnnnnnnn | X |
| Specifies the number of tracks allocated in the EAS area of an EAV volume |
AD_TRKSF=nnnnnnnnnn | X |
| Contains the number of tracks unused by the data set on the volume |
AD_TRKSFB>nnnnnnnnnn | X |
| Specifies the number of tracks unused by the data set on a non-EAV volume or in the BAS area of an EAV volume For VSAM data sets, the number of tracks unused is calculated from the high-allocated RBA and high-used RBA values for each volume. |
AD_TRKSFE>nnnnnnnnnn | X |
| Specifies the number of tracks unused by the data set in the EAS area of an EAV volume For VSAM data sets, the number of tracks unused is calculated from the high-allocated RBA and high-used RBA values for each volume. |
AD_TRKSU=nnnnnnnnnn | X |
| Contains the number of tracks used by the data set on the volume |
AD_TRKSUB>nnnnnnnnnn | X |
| Specifies the number of tracks used by the data set on a non-EAV volume or in the BAS area of an EAV volume |
AD_TRKSUE>nnnnnnnnnn | X |
| Specifies the number of tracks used by the data set in the EAS area of an EAV volume |
AD_VOL=xxxxxx | X |
| Specifies the volume number |
AD_VOLSQ=nnnnn | X |
| Specifies the volume sequence number for the data set |
AD_VSAMCOMP=I | D | X |
| Indicates whether this is the data or index component of a VSAM cluster |
AD_VSNVS=N | V | X |
| Specifies whether data set category is only non-VSAM or only VSAM |
AD_WCDAY=nnnnn (PTF BPG7604 applied) | X | Specifies the number of working days since the data set was created (0-99999) | |
AD_WDAY=nnnnn | X |
| Specifies the number of working days (0-2147483647) since the data set was last referenced |
AD_XDATE=xxxxxxxxxx | X |
| Specifies the expiration date for the data set in yyyy/mm/dd format |
AD_XTFMT=YES|NO|Y|N | X |
| Indicates whether the data set is in extended format |
AD_XTNDA=YES|NO|Y|N | X |
| Indicates if the data set is extended addressability |
AE_CALAGE=nnnn | X |
| Specifies the calendar-adjusted number of days since the data set was last referenced |
AE_CATEGORY=BACKUP | DUMP | MIGRATION | RECALL | RECOVERY | RESTORE | SPCMGMT | OTHER | X |
| Specifies the category of failing HSM function |
AE_DSN=xxxxxxxxxxxxx | X |
| Specifies the name of the data set against which the failing HSM function was performed |
AE_DSNn=xxxxxxxx | X |
| Specifies the data set name qualifier of the data set against which the failing HSM function was performed |
AE_DSORG=PS|DA | PO | VS | X |
| Specifies the data set organization |
AE_FRVOL=xxxxxx | X |
| Specifies the volser of the original (from) volume |
AE_HLQ=xxxxxxxx | X |
| Specifies the high-level data set name qualifier of the data set against which the failing HSM function was performed |
AE_HOST=xx | X |
| Specifies the ID of HSM host performing the failing function |
AE_JOBNAME=xxxxxxxx | X |
| Specifies the job name of the requestor of the failing HSM function |
AE_LLQ=xxxxxxxx | X |
| Specifies the low-level data set name qualifier of the data set against which the failing HSM function was performed |
AE_LREF=yyyy/mm/dd | X |
| Specifies the date when the data set was last referenced |
AE_MGMTCL=xxxxxxxx | X |
| Specifies the name of an SMS Management Class for the data set that the failing HSM function was performed against |
AE_POOL=xxxxxxxx | X |
| Specifies the name of a MainView SRM Pool in which the data set is found, based on the primary volume against which the failing HSM function was performed |
AE_RC=nnnn | X |
| Specifies the return code of the failing HSM function |
AE_REFAGE=nnnn | X |
| Specifies the number of days since the data set was last referenced. |
AE_RSN=nnnn | X |
| Specifies the reason code of the failing HSM function |
AE_SIZE=nnnnnnnnnnnnnnnnnnn | K | M | G | T | X |
| Specifies the data set size in bytes |
AE_SMS=YES | NO | Y | N | X |
| Specifies whether the data set that the failing HSM function was performed against is managed by SMS |
AE_STORCL=xxxxxxxx | X |
| Specifies the name of an SMS Storage Class for the data set that the failing HSM function is performed against |
AE_STORGRP=xxxxxxxx | X |
| Specifies the name of an SMS Storage Group for the data set that the failing HSM function is performed against |
AE_TVOL=xxxxxx | X |
| Specifies the volser of the receiving (to) volume |
AE_USERID=xxxxxxxx | X |
| Specifies the user ID of the requestor of the failing HSM function |
AL_ACCCNT=nnnnnnnnnn... | X |
| Specifies an alias access count in the current Catalog Scan performance interval |
AL_ACCTIM=nnnnnnnnnn... | X |
| Specifies an alias average access time in the current Catalog Scan performance interval The access time is in microseconds (0.000001 seconds). |
AL_ACCTIMHC=nnnnnnnnnn... | X |
| Specifies the access count from the hour with the highest average access time in the current Catalog Scan performance interval |
AL_ACCTIMHR=hh | X |
| Specifies the hour containing the highest average access time in the current Catalog Scan performance interval. |
AL_ACCTIMHW=nnnnnnnnnn... | X |
| Specifies the highest average access time from all hours in the current Catalog Scan performance interval The access time is in microseconds (0.000001 seconds). |
AL_ALIAS=xxxxxxxx | X |
| Specifies the alias name |
AL_DS#=nnnnnnnnnn | X |
| Specifies the data set entries associated with the alias |
AL_INMAST=YES|NO | X |
| Specifies if the alias is defined in the master catalog |
ALCTYPE=xxx | X | X | Quantity unit of space allocation (KB, MB, TRK, CYL, KAV, MAV, UAV, BLK) |
ALTPOOL=xxxxxxxx |
| X | Alternate pool for space allocation (1-8 characters) |
AO_DA_CASPL=nnnnn | X |
| Specifies to include or exclude a data set based on VSAM data component CA split count |
AO_DA_CISPL=nnnnn | X |
| Specifies to include or exclude a data set based on VSAM data component CI split count |
AO_DA_DELS=nnnnn | X |
| Specifies to include or exclude a data set based on VSAM data component deleted record count |
AO_DA_EXTS=nnnnn | X |
| Specifies to include or exclude a data set based on VSAM data component extent count |
AO_DA_HARBA=nnnnn | X |
| Specifies to include or exclude a data set based on VSAM data component high allocated RBA |
AO_DA_HURBA=nnnnn | X |
| Specifies to include or exclude a data set based on VSAM data component high used RBA |
AO_DA_INS=nnnnn | X |
| Specifies to include or exclude a data set based on VSAM data component record inserts |
AO_DA_PCTF=nnn | X |
| Specifies to include or exclude a data set based on VSAM data component percentage full |
AO_DA_PCTFT=nnnn | X |
| Specifies to include or exclude a data set based on VSAM data component percentage full (the number is in tenths) |
AO_DA_RECS=nnnnn | X |
| Specifies to include or exclude a data set based on VSAM data component total record count |
AO_DA_UPDS=nnnnn | X |
| Specifies to include or exclude a data set based on VSAM data component record updates |
AO_DSN=xxxxxxxx | X |
| Specifies the VSAM cluster, or mask of clusters, to include or exclude |
AO_IX_EXTS=nnnnn | X |
| Specifies to include or exclude a data set based on VSAM index component extent count |
AO_IX_HARBA=nnnnn | X |
| Specifies to include or exclude a data set based on VSAM index component high allocated RBA |
AO_IX_HURBA=nnnnn | X |
| Specifies to include or exclude a data set based on VSAM index component high used RBA |
AO_IX_PCTF=nnn | X |
| Specifies to include or exclude a data set based on VSAM index component percentage full |
AO_IX_PCTFT=nnnn | X |
| Specifies to include or exclude a data set based on VSAM index component percentage full (the number is in tenths) |
AO_IX_RECS=nnnnn | X |
| Specifies to include or exclude a data set based on VSAM index component total record count |
AO_JOB=xxxxxxxx | X |
| Specifies a job name to include or exclude |
AO_JOBELAP=nnnnn | X |
| Specifies to include or exclude a data set based on the time (in minutes) a job has been running |
AO_RLS=Y | N | YES | NO | X |
| Specifies to include or exclude a data set based on if RLS is being used |
AP_CTIGC=nnnnnnnnnn | X |
| Includes or excludes pools based on the largest contiguous free cylinders (0-2147483647) |
AP_CTIGCB<nnnnnnnnnn | X |
| Includes or excludes pools based on the largest amount of contiguous free cylinders either on a non-EAV volume or in the BAS area of an EAV volume in the pool |
AP_CTIGCE<nnnnnnnnnnn | X |
| Includes or excludes pools based on the largest amount of contiguous free cylinders in the EAS area of an EAV volume in the pool |
AP_CTIGT=nnnnnnnnnn | X |
| Includes or excludes pools based on the largest contiguous free tracks (0-2147483647) |
AP_CTIGTB<nnnnnnnnnnn | X |
| Includes or excludes pools based on the largest amount of contiguous free tracks either on a non-EAV volume or in the BAS area of an EAV volume in the pool |
AP_CTIGTE<nnnnnnnnnnn | X |
| Includes or excludes pools based on the largest amount of contiguous free tracks in the EAS area of an EAV volume in the pool |
AP_DS#DA=nnnnnnnn | X |
| Includes or excludes pools based on the number of data sets that are allocated on volumes with an SMS status of DISABLED ALL |
AP_DS#DN=nnnnnnnn | X |
| Includes or excludes pools based on the number of data sets that are allocated on volumes with an SMS status off DISABLED NEW |
AP_DS#EN=nnnnnnnn | X |
| Includes or excludes pools based on the number of data sets that are allocated on volumes with an SMS status of ENABLED |
AP_DS#NM=nnnnnnnn | X |
| Includes or excludes pools based on the number of data sets that are allocated on volumes with an SMS status of NOT SMS MANAGED |
AP_DS#NS=nnnnnnnn | X |
| Includes or excludes pools based on the total number of data sets on volumes with an SMS status of NO STATUS GIVEN |
AP_DS#QA=nnnnnnnn | X |
| Includes or excludes pools based on the number of data sets that are allocated on volumes with an SMS status of QUIESCED ALL |
AP_DS#QN=nnnnnnnn | X |
| Includes or excludes pools based on the number of data sets that are allocated on volumes with an SMS status of QUIESCED NEW |
AP_DTDB2=nnnnn | X |
| Specifies the number of data sets with DSNTYPE DB2 |
AP_DTDBZ=nnnnn | X |
| Specifies the total size of data sets with DSNTYPE DB2 |
AP_DTGDS=nnnnn | X |
| Specifies the number of data sets with DSNTYPE GDS |
AP_DTGDZ=nnnnn | X |
| Specifies the total size of data sets with DSNTYPE GDS |
AP_DTHFS=nnnnn | X |
| Specifies the number of data sets with DSNTYPE HFS |
AP_DTHFZ=nnnnn | X |
| Specifies the total size of data sets with DSNTYPE HFS |
AP_DTHSM=nnnnn | X |
| Specifies the number of data sets with DSNTYPE HSM |
AP_DTHSZ=nnnnn | X |
| Specifies the total size of data sets with DSNTYPE HSM |
AP_DTLRG=nnnnn | X |
| specifies the number of data sets with DSNTYPE LRGE (large format data sets) |
AP_DTLRZ=nnnnn | X |
| Specifies the total size of data sets with DSNTYPE LRGE (large format data sets) |
AP_DTNVS=nnnnn | X |
| Specifies the number of data sets with DSNTYPE NVSM. |
AP_DTNVZ=nnnnn | X |
| Specifies the total size of data sets with DSNTYPE NVSM |
AP_DTPDE=nnnnn | X |
| Specifies the number of data sets with DSNTYPE PDE |
AP_DTPDZ=nnnnn | X |
| Specifies the total size of data sets with DSNTYPE PDE |
AP_DTTMP=nnnnn | X |
| Specifies the number of data sets with DSNTYPE TMP |
AP_DTTMZ=nnnnn | X |
| Specifies the total size of data sets with DSNTYPE TMP |
AP_DTVSM=nnnnn | X |
| Specifies the number of data sets with DSNTYPE VSAM. |
AP_DTVSZ=nnnnn | X |
| Specifies the total size of data sets with DSNTYPE VSAM |
AP_DTZFS=nnnnn | X |
| Specifies the number of data sets with DSNTYPE ZFS |
AP_DTZFZ=nnnnn | X |
| Specifies the total size of data sets with DSNTYPE ZFS |
AP_FREEC=nnnnnnnnnn | X |
| Includes or excludes pools based on the total count of free cylinders (0-2147483647) |
AP_FREECB<nnnnnnnnnnn | X |
| Includes or excludes pools based on the total count of free cylinders on non-EAV volumes and in the BAS area of EAV volumes |
AP_FREECE<nnnnnnnnnnn | X |
| Includes or excludes pools based on the total count of free cylinders in the EAS area of EAV volumes in the pool |
AP_FREED=nnnnnnnnnn | X |
| Includes or excludes pools based on the total number of free data set control blocks (DSCB) for all volumes (0-2147483647) |
AP_FREEDA=nnnnn | X |
| Specifies the free size of SMS DISABLED ALL volumes in the pool |
AP_FREEDN=nnnnn | X |
| Specifies the free size of SMS DISABLED NEW volumes in the pool |
AP_FREEEN=nnnnn | X |
| Specifies the free size of SMS ENABLED volumes in the pool |
AP_FREENG=nnnnn | X |
| Specifies the free size of SMS NOT GIVEN volumes in the pool |
AP_FREEQA=nnnnn | X |
| Specifies the free size of SMS QUIESCE ALL volumes in the pool |
AP_FREEQN=nnnnn | X |
| Specifies the free size of SMS QUIESCE NEW volumes in the pool |
AP_FREET=nnnnnnnnnn | X |
| Includes or excludes pools based on the total count of free tracks (0-2147483647) |
AP_FREETB<nnnnnnnnnnn | X |
| Includes or excludes pools based on the total count of free tracks on non-EAV volumes and in the BAS area of EAV volumes |
AP_FREETE<nnnnnnnnnnn | X |
| Includes or excludes pools based on the total count of free tracks in the EAS area of EAV volumes in the pool |
AP_FREEUN=nnnnn | X |
| Specifies the free size of SMS UNMANAGED volumes in the pool |
AP_FREEV=nnnnnnnnnn | X |
| Includes or excludes pools based on the total number of free index records in a volume’s VTOC index (0-2147483647) |
AP_FREEX=nnnnnnnnnn | X |
| Includes or excludes pools based on the total number of free extents (0-2147483647) |
AP_FREEXB<nnnnnnnnnnn | X |
| Includes or excludes pools based on the total count of free extents on non-EAV volumes and in the BAS area of EAV volumes |
AP_FREEXE<nnnnnnnnnnn | X |
| Includes or excludes pools based on the total count of free extents in the EAS area of EAV volumes in the pool |
AP_FSIZE=nnnnnnnnnnnnnnnnnnn | X |
| Includes or excludes pools based on the amount of free space in the pool (0-9223372036854775807) |
AP_FSIZEB<nnnnnnnnnnn | X |
| Includes or excludes pools based on the amount of free space in the pool in bytes on non-EAV volumes and in the BAS area of EAV volumes |
AP_FSIZEE<nnnnnnnnnnn | X |
| Includes or excludes pools based on the amount of free space in bytes in the EAS area of EAV volumes in the pool |
AP_GROUP=xxxxxxxxx | X |
| Includes or excludes pools based on the pool, group, or subpool name |
AP_HDFUL=nnn | X |
| Includes or excludes pools based on the VVDS percentage full high-water mark (1-100) |
AP_HDFULT=nnnn | X |
| Includes or excludes pools based on the high-water mark volume VVDS percentage full in tenths, which is the percentage full of the most utilized volume VVDS in the pool (0-1000) |
AP_HFULL=nnn | X |
| Includes or excludes pools based on the high-water mark volume percentage full, which is the percentage full of the highest utilized volume in the pool (0-100) |
AP_HFULLT=nnnn | X |
| Includes or excludes pools based on the high-water mark volume percentage full in tenths, which is the percentage full of the highest utilized volume in the pool (0-1000) |
AP_HIFUL=nnn | X |
| Includes or excludes pools based on the high-water mark volume VIR percentage full (1-100) |
AP_HIFULT=nnnn | X |
| Includes or excludes pools based on the high-water mark volume VIR percentage full in tenths, which is the percentage full of the most utilized volume VIR in the pool (0-1000) |
AP_HREEC=nnnnnnnnnn | X |
| Includes or excludes pools based on the high-water mark count of free cylinders (0-2147483647) |
AP_HREECB<nnnnnnnnnn | X |
| Includes or excludes pools based on the high-water mark count of free cylinders on non-EAV volumes and in the BAS area of EAV volumes |
AP_HREECE<nnnnnnnnnn | X |
| Includes or excludes pools based on the high-water mark count of free cylinders in the EAS area of EAV volumes in the pool |
AP_HREED=nnnnnnnnnn | X |
| Includes or excludes pools based on the high-water mark count of free DSCBs (0-2147483647) |
AP_HREET=nnnnnnnnnn | X |
| Includes or excludes pools based on the high-water mark count of free tracks (0-2147483647) |
AP_HREETB<nnnnnnnnnn | X |
| Includes or excludes pools based on the high-water mark count of free tracks on non-EAV volumes and in the BAS area of EAV volumes |
AP_HREETE<nnnnnnnnnn | X |
| Includes or excludes pools based on the high-water mark count of free tracks in the EAS area of EAV volumes in the pool |
AP_HREEV=nnnnnnnnnn | X |
| Includes or excludes pools based on the high-water mark count of free VIR (0-2147483647) |
AP_HREEX=nnnnnnnnnn | X |
| Includes or excludes pools based on the high-water mark count of free extent (0-2147483647) |
AP_HREEXB<nnnnnnnnnn | X |
| Includes or excludes pools based on the high-water mark count of free extents on non-EAV volumes and in the BAS area of EAV volumes |
AP_HREEXE<nnnnnnnnnn | X |
| Includes or excludes pools based on the high-water mark count of free extents in the EAS area of EAV volumes in the pool |
AP_HVFRG=nnn | X |
| Includes or excludes pools based on the high-water mark fragmentation index (0-100) |
AP_HVFUL=nnn | X |
| Includes or excludes pools based on the high-water mark VTOC percentage full (0-100) |
AP_HVFULT=nnnn | X |
| Includes or excludes pools based on the high-water mark VTOC percentage full in tenths (0-1000) |
AP_IDLEDA=nnnnn | X |
| Specifies the idle size of SMS DISABLED ALL volumes in the pool |
AP_IDLEDN=nnnnn | X |
| Specifies the idle size of SMS DISABLED NEW volumes in the pool |
AP_IDLEEN=nnnnn | X |
| Specifies the idle size of SMS ENABLED volumes in the pool |
AP_IDLENG=nnnnn | X |
| Specifies the idle size of SMS NOT GIVEN volumes in the pool |
AP_IDLEQA=nnnnn | X |
| Specifies the idle size of SMS QUIESCE ALL volumes in the pool |
AP_IDLEQN=nnnnn | X |
| Specifies the idle size of SMS QUIESCE NEW volumes in the pool |
AP_IDLEUN=nnnnn | X |
| Specifies the idle size of SMS UNMANAGED volumes in the pool |
AP_ISIZE=nnnn | X |
| Indicates the total size in tracks of the VTOC indexes contained in the pool |
AP_LDFUL=nnn | X |
| Includes or excludes pools based on the VVDS percentage full low-water mark (1-100) |
AP_LDFULT=nnnn | X |
| Includes or excludes pools based on the low-water mark volume VVDS percentage full in tenths, which is the percentage full of the least utilized volume VVDS in the pool (0-1000) |
AP_LFULL=nnn | X |
| Includes or excludes pools based on the low-water mark volume percentage full (0-100) |
AP_LFULLT=nnnn | X |
| Includes or excludes pools based on the low-water mark volume percentage full in tenths (0-1000) |
AP_LIFUL=nnn | X |
| Includes or excludes pools based on the low-water mark volume VIR percentage full (1-100) |
AP_LIFULT=nnnn | X |
| Includes or excludes pools based on the low-water mark volume VIR percentage full in tenths, which is the percentage full of the least utilized volume VIR in the pool (0-1000) |
AP_LPRIC=nnnnnnnnnn | X |
| Includes or excludes pools based on the largest primary allocation (cylinders) (0-2147483647) |
AP_LPRICB<nnnnnnnnnn | X |
| Includes or excludes pools based on the largest primary allocation (cylinders) either on a non-EAV volume or in the BAS area of an EAV volume in the pool |
AP_LPRICE<nnnnnnnnnn | X |
| Includes or excludes pools based on the largest primary allocation (cylinders) in the EAS area of EAV volumes |
AP_LPRIT=nnnnnnnnnn | X |
| Includes or excludes pools based on the largest primary allocation (tracks) (0-2147483647) |
AP_LPRITB<nnnnnnnnnn | X |
| Includes or excludes pools based on the largest primary allocation (tracks) either on a non-EAV volume or in the BAS area of an EAV volume in the pool |
AP_LPRITE<nnnnnnnnnn | X |
| Includes or excludes pools based on the largest primary allocation (tracks) in the EAS area of an EAV volume in the pool |
AP_LREEC=nnnnnnnnnn | X |
| Includes or excludes pools based on the low-water mark free count of cylinders (0-2147483647) |
AP_LREECB<nnnnnnnnnn | X |
| Includes or excludes pools based on the low-water mark count of free cylinders on non-EAV volumes and in the BAS area of EAV volumes |
AP_LREECE<nnnnnnnnnn | X |
| Includes or excludes pools based on the low-water mark count of free cylinders in the EAS area of EAV volumes in the pool |
AP_LREED=nnnnnnnnnn | X |
| Includes or excludes pools based on the low-water mark free count of DSCBs (0-2147483647) |
AP_LREET=nnnnnnnnnn | X |
| Includes or excludes pools based on the low-water mark free count of tracks (0-2147483647) |
AP_LREETB<nnnnnnnnnn | X |
| Includes or excludes pools based on the low-water mark count of free tracks on non-EAV volumes and in the BAS area of EAV volumes |
AP_LREETE<nnnnnnnnnn | X |
| Includes or excludes pools based on the low-water mark count of free tracks in the EAS area of EAV volumes in the pool |
AP_LREEV=nnnnnnnnnn | X |
| Includes or excludes pools based on the low-water mark free count of VIR(0-2147483647) |
AP_LREEX=nnnnnnnnnn | X |
| Includes or excludes pools based on the low-water mark free count of extent (0-2147483647) |
AP_LREEXB<nnnnnnnnnn | X |
| Includes or excludes pools based on the low-water mark count of free extents on non-EAV volumes and in the BAS area of EAV volumes |
AP_LREEXE<nnnnnnnnnn | X |
| Includes or excludes pools based on the low-water mark count of free extents in the EAS area of EAV volumes in the pool |
AP_LVFRG=nnn | X |
| Includes or excludes pools based on the low-water mark fragmentation index (0-100) |
AP_LVFUL=nnn | X |
| Includes or excludes pools based on the low-water mark of VTOC percentage full (0-100) |
AP_LVFULT=nnnn | X |
| Includes or excludes pools based on the low-water mark volume VTOC percentage full in tenths, which is the percentage full of the least utilized volume VTOC in the pool (0-1000) |
AP_NONVSDSC=nnnnnnnnnn | X |
| Includes or excludes pools based on the number of non-VSAM data sets that are defined in the pool |
AP_NONVSDSZ=nnnnnnnnnn | X |
| Includes or excludes pools based on the number of bytes that are allocated to non-VSAM data sets defined in the pool |
AP_PCTTDA=nnn | X |
| Specifies the percentage of total pool space for SMS DISABLED ALL volumes |
AP_PCTTDAT=nnnn | X |
| Specifies the percentage of total pool space for SMS DISABLED ALL volumes in tenths |
AP_PCTTDN=nnn | X |
| Specifies the percentage of total pool space for SMS DISABLED NEW volumes |
AP_PCTTDNT=nnnn | X |
| Specifies the percentage of total pool space for SMS DISABLED NEW volumes in tenths |
AP_PCTTEN=nnn | X |
| Specifies the percentage of total pool space for SMS ENABLED volumes |
AP_PCTTENT=nnnn | X |
| Specifies the percentage of total pool space for SMS ENABLED volumes in tenths |
AP_PCTTNG=nnn | X |
| Specifies the percentage of total pool space for SMS NOT GIVEN volumes |
AP_PCTTNGT=nnnn | X |
| Specifies the percentage of total pool space for SMS NOT GIVEN volumes in tenths |
AP_PCTTQA=nnn | X |
| Specifies the percentage of total pool space for SMS QUIESCE ALL volumes |
AP_PCTTQAT=nnnn | X |
| Specifies the percentage of total pool space for SMS QUIESCE ALL volumes in tenths |
AP_PCTTQN=nnn | X |
| Specifies the percentage of total pool space for SMS QUIESCE NEW volumes |
AP_PCTTQNT=nnnn | X |
| Specifies the percentage of total pool space for SMS QUIESCE NEW volumes in tenths |
AP_PCTTUN=nnn | X |
| Specifies the percentage of total pool space for SMS UNMANAGED volumes |
AP_PCTTUNT=nnnn | X |
| Specifies the percentage of total pool space for SMS UNMANAGED volumes in tenths |
AP_PCTUDA=nnn | X |
| Specifies the percentage used of SMS DISABLED ALL volumes in the pool |
AP_PCTUDAT=nnnn | X |
| Specifies the percentage used of SMS DISABLED ALL volumes in the pool in tenths |
AP_PCTUDN=nnn | X |
| Specifies the percentage used of SMS DISABLED NEW volumes in the pool |
AP_PCTUDNT=nnnn | X |
| Specifies the percentage used of SMS DISABLED NEW volumes in the pool in tenths |
AP_PCTUEN=nnn | X |
| Specifies the percentage used of SMS ENABLED volumes in the pool |
AP_PCTUENT=nnnn | X |
| Specifies the percentage used of SMS ENABLED volumes in the pool in tenths |
AP_PCTUNG=nnn | X |
| Specifies the percentage used of SMS NOT GIVEN volumes in the pool |
AP_PCTUNGT=nnnn | X |
| Specifies the percentage used of SMS NOT GIVEN volumes in the pool in tenths |
AP_PCTUQA=nnn | X |
| Specifies the percentage used of SMS QUIESCE ALL volumes in the pool |
AP_PCTUQAT=nnnn | X |
| Specifies the percentage used of SMS QUIESCE ALL volumes in the pool in tenths |
AP_PCTUQN=nnn | X |
| Specifies the percentage used of SMS QUIESCE NEW volumes in the pool |
AP_PCTUQNT=nnnn | X |
| Specifies the percentage used of SMS QUIESCE NEW volumes in the pool in tenths |
AP_PCTUUN=nnn | X |
| Specifies the percentage used of SMS UNMANAGED volumes in the pool |
AP_PCTUUNT=nnnn | X |
| Specifies the percentage used of SMS UNMANAGED volumes in the pool in tenths |
AP_PERFL=nnn | X |
| Includes or excludes pools based on the pool percentage full based on used space as it relates to total space (0-100) |
AP_PERFLB<nnn | X |
| Includes or excludes pools based on the percentage of used space to total space in the pool, not including EAS space This percentage includes non-EAV volume space and the BAS area of EAV volumes in the pool. |
AP_PERFLBT<nnn | X |
| Includes or excludes pools based on the percentage of used space to total space in the pool, not including EAS space, in tenths This percentage includes non-EAV volume space and the BAS area of EAV volumes in the pool in tenths. |
AP_PERFLE<nnn | X |
| Includes or excludes pools based on the percentage of used EAS space to total EAS space in the pool |
AP_PERFLET<nnn | X |
| Includes or excludes pools based on the percentage of used EAS space to total EAS space in the pool in tenths |
AP_PERFLT=nnnn | X |
| Includes or excludes pools based on the pool percentage full in tenths based on used space as it relates to total space (0-1000) |
AP_SMDS#DA=nnnnnnnnnn | X |
| Includes or excludes pools based on the size of the smallest data set in bytes on a volume with an SMS status of DISABLED ALL |
AP_SMDS#DN=nnnnnnnnnn | X |
| Includes or excludes pools based on the size of the smallest data set in bytes on a volume with an SMS status of DISABLED NEW |
AP_SMDS#EN=nnnnnnnnnn | X |
| Includes or excludes pools based on the size of the smallest data set in bytes on a volume with an SMS status of ENABLED |
AP_SMDS#NM=nnnnnnnnnn | X |
| Includes or excludes pools based on the size of the smallest data set in bytes on a volume with an SMS status of NOT MANAGED |
AP_SMDS#NS=nnnnnnnnnn | X |
| Includes or excludes pools based on the size of the smallest data set in bytes on a volume with an SMS status of NO STATUS GIVEN |
AP_SMDS#QA=nnnnnnnnnn | X |
| Includes or excludes pools based on the size of the smallest data set in bytes on a volume with an SMS status of QUIESCED ALL |
AP_SMDS#QN=nnnnnnnnnn | X |
| Includes or excludes pools based on the size of the smallest data set in bytes on a volume with an SMS status of QUIESCED NEW |
AP_SPACDA=nnnnnnnnnn | X |
| Includes or excludes pools based on the number of bytes that are allocated on volumes with an SMS status of DISABLED ALL |
AP_SPACDN=nnnnnnnnnn | X |
| Includes or excludes pools based on the number of bytes that are allocated on volumes with an SMS status of DISABLED NEW |
AP_SPACEN=nnnnnnnnnn | X |
| Includes or excludes pools based on the number of bytes that are allocated on volumes with an SMS status of ENABLED |
AP_SPACNM=nnnnnnnnnn | X |
| Includes or excludes pools based on the number of bytes that are allocated on volumes with an SMS status of NOT SMS MANAGED |
AP_SPACNS=nnnnnnnnnn | X |
| Includes or excludes pools based on the number of bytes that are allocated on volumes with an SMS status of NO STATUS GIVEN |
AP_SPACQA=nnnnnnnnnn | X |
| Includes or excludes pools based on the number of bytes that are allocated on volumes with an SMS status of QUIESCED ALL |
AP_SPACQN=nnnnnnnnnn | X |
| Includes or excludes pools based on the number of bytes that are allocated on volumes with an SMS status of QUIESCED NEW |
AP_STORGRP=xxxxxxxx |
| X | Specifies the pool, group, or subpool name (1-8 characters) |
AP_TOTALDA=nnnnn | X |
| Specifies the total size of SMS DISABLED ALL volumes in the pool |
AP_TOTALDN=nnnnn | X |
| Specifies the total size of SMS DISABLED NEW volumes in the pool |
AP_TOTALEN=nnnnn | X |
| Specifies the total size of SMS ENABLED volumes in the pool |
AP_TOTALNG=nnnnn | X |
| Specifies the total size of SMS NOT GIVEN volumes in the pool |
AP_TOTALQA=nnnnn | X |
| Specifies the total size of SMS QUIESCE ALL volumes in the pool |
AP_TOTALQN=nnnnn | X |
| Specifies the total size of SMS QUIESCE NEW volumes in the pool |
AP_TOTALUN=nnnnn | X |
| Specifies the total size of SMS UNMANAGED volumes in the pool |
AP_TSIZE=nnnnnnnnnnnnnnnnnnn | X |
| Includes or excludes pools based on the total allocated space in bytes (0-9223372036854775807) |
AP_TYPE=xxxxxxx | X |
| Includes or excludes pools based on the pool type: POOL, SUBPOOL, or STORGRP |
AP_USEDDA=nnnnn | X |
| Specifies the used size of SMS DISABLED ALL volumes in the pool |
AP_USEDDN=nnnnn | X |
| Specifies the used size of SMS DISABLED NEW volumes in the pool |
AP_USEDEN=nnnnn | X |
| Specifies the used size of SMS ENABLED volumes in the pool |
AP_USEDNG=nnnnn | X |
| specifies the used size of SMS NOT GIVEN volumes in the pool |
AP_USEDQA=nnnnn | X |
| Specifies the used size of SMS QUIESCE ALL volumes in the pool |
AP_USEDQN=nnnnn | X |
| Specifies the used size of SMS QUIESCE NEW volumes in the pool |
AP_USEDUN=nnnnn | X |
| Specifies the used size of SMS UNMANAGED volumes in the pool |
AP_USIZE=nnnnnnnnnnnnnnnnnnn | X |
| Includes or excludes pools based on the amount of allocated space in the pool (used size) (0-9223372036854775807) |
AP_VOL#DA=nnnnn | X |
| Includes or excludes pools based on the number of volumes in the pool with an SMS status of DISABLED ALL |
AP_VOL#DN=nnnnn | X |
| Includes or excludes pools based on the number of volumes in the pool with an SMS status of DISABLED ALL DISABLED NEW |
AP_VOL#EN=nnnnn | X |
| Includes or excludes pools based on the number of volumes in the pool with an SMS status of DISABLED ALL ENABLED |
AP_VOL#NM=nnnnn | X |
| Includes or excludes pools based on the number of volumes in the pool with an SMS status of DISABLED ALL NOT SMS MANAGED |
AP_VOL#NS=nnnnn | X |
| Includes or excludes pools based on the number of volumes in the pool with an SMS status of DISABLED ALL NO STATUS GIVEN |
AP_VOL#OFFL=nnnnn | X |
| Includes or excludes pools based on the number of volumes that are assigned to the group that is currently offline |
AP_VOL#QA=nnnnn | X |
| Includes or excludes pools based on the number of volumes in the pool with an SMS status of DISABLED ALL QUIESCED ALL |
AP_VOL#QN=nnnnn | X |
| Includes or excludes pools based on the number of volumes in the pool with an SMS status of DISABLED ALL QUIESCED NEW |
AP_VOLC=nnnnnnnnnn | X |
| Includes or excludes pools based on the number of online volumes in this pool on the collecting z/OS system (0-2147483647) |
AP_VOLCE<nnnnnnnnnn | X |
| Includes or excludes pools based on the number of online EAV volumes in the pool |
AP_VOLFRAGH=nnnn | X |
| Includes or excludes pools based on the highest fragmentation index value of all volumes in the pool |
AP_VSAMDSC=nnnnnnnnn | X |
| Includes or excludes pools based on the number of VSAM data sets that are defined in the pool |
AP_VSAMDSZ=nnnnnnnnnn | X |
| Includes or excludes pools based on the number of bytes that are allocated to VSAM data sets that are defined in the pool |
APPL=applicationName | X |
| Storage Guard Control Application name used for filtration for EZSRMHSM views |
ATL_LIBNAME=xxxxxxxx | X |
| Specifies the name of an Automated Tape Library |
AUTOLEV=xxxxxxxx | X |
| Contains an 8-character literal AUTOLEVx, where x is a number indicating the current automation level for the resource being automated |
AV_CTIGC=nnnnnnnnnn | X |
| Contains the largest single extent in full cylinders available for allocation (0-2147483647) |
AV_CTIGCB<nnnnnnnnnn | X |
| Specifies the largest single extent in full cylinders available for allocation either on a non-EAV volume or in the BAS area of an EAV volume |
AV_CTIGCE<nnnnnnnnnn | X |
| Specifies the largest single extent in full cylinders available for allocation in the EAS area of an EAV volume |
AV_CTIGT=nnnnnnnnnn | X |
| Contains the largest single extent in tracks available for allocation (0-2147483647) |
AV_CTIGTB<nnnnnnnnnn | X |
| Specifies the largest single extent in tracks available for allocation either on a non-EAV volume or in the BAS area of an EAV volume |
AV_CTIGTE<nnnnnnnnnn | X |
| Specifies the largest single extent in tracks available for allocation in the EAS area of an EAV volume |
AV_DEVTYPE=xxxxxxxx | X |
| Includes or excludes volumes based on the emulated device type |
AV_DSMINBYT=nnnnnnnn | X |
| Contains the size of the smallest data set on the volume in bytes (0-9223372036854775807) |
AV_DSNC=nnnnnn | X |
| Includes or excludes volumes based on the number of data sets on a volume |
AV_DSNCE>nnnnnn | X |
| Includes or excludes volumes based on the number of data sets in the EAS area of the volume |
AV_DTDB2=nnnnn | X |
| Specifies the number of data sets with DSNTYPE DB2 (generation data sets) |
AV_DTDBZ=nnnnn | X |
| Specifies the total size in tracks of data sets with DSNTYPE DB2 (generation data sets) |
AV_DTGDS=nnnnn | X |
| Specifies the number of data sets with DSNTYPE GDS |
AV_DTGDZ=nnnnn | X |
| Specifies the total size in tracks of data sets with DSNTYPE GDS |
AV_DTHFS=nnnnn | X |
| Specifies the number of data sets with DSNTYPE HFS |
AV_DTHFZ=nnnnn | X |
| Specifies the total size of data sets in tracks with DSNTYPE HFS |
AV_DTHSM=nnnnn | X |
| Specifies the number of data sets with DSNTYPE HSM backup or migrate data sets |
AV_DTHSZ=nnnnn | X |
| Specifies the total size in tracks of data sets with DSNTYPE HSM backup or migrate data sets |
AV_DTLRG=nnnnn | X |
| Specifies the number of data sets with DSNTYPE LRGE (large format data sets) |
AV_DTLRZ=nnnnn | X |
| Specifies the total size in tracks of data sets with DSNTYPE LRGE (large format data sets) |
AV_DTNVS=nnnnn | X |
| Specifies the number of data sets with DSNTYPE NVSM |
AV_DTNVZ=nnnnn | X |
| Specifies the total size in tracks of data sets with DSNTYPE NVSM |
AV_DTPDE=nnnnn | X |
| Specifies the number of data sets with DSNTYPE PDE |
AV_DTPDZ=nnnnn | X |
| Specifies the total size in tracks of data sets with DSNTYPE PDE |
AV_DTTMP=nnnnn | X |
| Specifies the number of data sets with DSNTYPE TMP |
AV_DTTMZ=nnnnn | X |
| Specifies the total size in tracks of data sets with DSNTYPE TMP |
AV_DTVSM=nnnnn | X |
| Specifies the number of data sets with DSNTYPE VSAM |
AV_DTVSZ=nnnnn | X |
| Specifies the total size in tracks of data sets with DSNTYPE VSAM |
AV_DTZFS=nnnnn | X |
| Specifies the number of data sets with DSNTYPE ZFS |
AV_DTZFZ=nnnnn | X |
| Specifies the total size in tracks of data sets with DSNTYPE ZFS |
AV_EAVI>Y | N | YES | NO | X |
| Specifies whether the volume is an EAV volume |
AV_FBYTE=nnnnnnnnnnn | X |
| Specifies the number of free bytes on the volume (0-9223372036854775807) |
AV_FBYTEB>nnnnnnnnnn | X |
| Specifies the amount of used space in a non-EAV volume or in the BAS area of an EAV volume, in bytes |
AV_FBYTEE>nnnnnnnnnn | X |
| Specifies the amount of used space in the EAS area of an EAV volume in bytes |
AV_FRAGI=nnnn | X |
| Contains the fragmentation index value of the volume (0-1000) Higher values mean that the volume is more fragmented. |
AV_FRAGIB<nnnn | X |
| Specifies the fragmentation index value of a non-EAV volume or in the BAS area of an EAV volume |
AV_FRAGIE<nnnn | X |
| Specifies the fragmentation index value of the EAS area of an EAV volume; higher values mean that the volume is more fragmented |
AV_FREEC=nnnnnnnnnn | X |
| Contains the number of free cylinders on the volume(0-2147483647) |
AV_FREECB<nnnnnnnnnn | X |
| Specifies the number of free cylinders on a non-EAV volume or in the BAS area of an EAV volume |
AV_FREECE<nnnnnnnnnn | X |
| Specifies the number of free cylinders in the EAS area of EAV volumes |
AV_FREED=nnnnnnnnnn | X |
| Contains the number of free (Format 0) DSCBs on the volume (0-2147483647) |
AV_FREET=nnnnnnnnnn | X |
| Contains the number of free tracks on the volume (0-2147483647) |
AV_FREETB<nnnnnnnnnn | X |
| Specifies the number of free tracks on a non-EAV volume or in the BAS area of an EAV volume |
AV_FREETE<nnnnnnnnnn | X |
| Specifies the number of free tracks in the EAS area of EAV volumes |
AV_FREEV=nnnnnnnnnn | X |
| Contains the number of free VIRs (VTOC index records) on the volume (0-2147483647) |
AV_FREEX=nnnnnnnnnn | X |
| Total amount of free extents on the volume (0-2147483647) |
AV_FREEXB<nnnnnnnnnn | X |
| Specifies the number of free extents on a non-EAV volume or in the BAS area of an EAV volume |
AV_FREEXE<nnnnnnnnnn | X |
| Specifies the number of free extents in the EAS area of an EAV volume |
AV_FSIZE=nnnnnnnnnn | X |
| Number of tracks not used on the volume (0-2147483647) |
AV_FULL=nnn | X |
| Contains the percentage of used space to total space for the volume (0-100) |
AV_FULLB<nnn | X |
| Specifies the percentage of used space to total space in the BAS area of an EAV volume For non-EAV volume, this value is the total volume percentage full. |
AV_FULLBT<nnn | X |
| Specifies the percentage of used space to total space in the BAS area of an EAV volume in tenths For non-EAV volume, this value is the total volume percentage full. |
AV_FULLE<nnn | X |
| Specifies the percentage of used EAS space to total EAS space on an EAV volume |
AV_FULLET<nnn | X |
| Specifies the percentage of used EAS space to total EAS space on an EAV volume in tenths |
AV_FULLT=nnnn | X |
| Contains the volume percentage full in tenths based on of used space as it relates to total space (0-1000) |
AV_IDLETRKS=nnnnnn | X |
| Includes or excludes volumes based on the number of idle tracks on a volume |
AV_IPCTF=nnn | X |
| Specifies the VTOC index percentage full from 0 to 100 |
AV_IPCTFT=nnnn | X |
| Specifies the VIR percentage full in tenths based on used space as it relates to total space in the VTOC index (0-1000) |
AV_ISIZE=nnnnnnnnnn | X |
| Specifies the total size in tracks of VTOC (0-2147483647) |
AV_LPRIC<nnnnnnnnnn | X |
| Specifies the largest possible primary extent on the volume in cylinders This value is the sum of the five largest extents on the volume. |
AV_LPRICB<nnnnnnnnnn | X |
| Specifies the largest possible primary extent on a non-EAV volume or in the BAS area of an EAV volume, in cylinders This value is the sum of the five largest extents on a non-EAV volume or in the BAS area of an EAV volume. |
AV_LPRICE<nnnnnnnnnn | X |
| Specifies the largest possible primary extent in the EAS area of an EAV volume in cylinders This value is the sum of the five largest extents in the EAS area of and EAV volume. |
AV_LPRIT=nnnnnnnnnn | X |
| Contains the largest possible primary extent in tracks; the sum of the 5 largest extents on the volume (0-2147483647) |
AV_LPRITB<nnnnnnnnnn | X |
| Specifies the largest possible primary extent on a non-EAV volume or in the BAS area of an EAV volume, in tracks This value is the sum of the five largest extents on a non-EAV volume or in the BAS area of an EAV volume. |
AV_LPRITE<nnnnnnnnnn | X |
| Specifies the largest possible primary extent in the EAS area of an EAV volume in tracks This value is the sum of the five largest extents in the EAS area of an EAV volume. |
AV_MNT=xxx | X |
| Contains how the volume is mounted: PUB Public, PVT Private, STG Storage, SYS System |
AV_PID=xxxxxxxxxxx | X |
| Specifies the physical disk ID (1-11 characters) |
AV_POLICY=xxxxxxxx | X |
| Includes or excludes volumes based on the policy to which the volume is assigned |
AV_POOL=poolName | X |
| Specifies the pool or subpool name associated with the record |
AV_PTYP=P | S | X |
| Specifies the type of pool (P) or subpool (S) |
AV_RAIDTYP=xxxxxxxxx | X |
| Includes or excludes volumes based on the type of RAID device |
AV_RVABYTS=nnnnnnnnn... | X |
| Includes or excludes volumes based on the number of back-end shared bytes that are assigned to the volume |
AV_RVABYTU=nnnnnnnnn... | X |
| Includes or excludes RVA volumes based on the number of RVA back-end unique bytes that are assigned to the volume |
AV_RVADEVID=xxxx | X |
| Includes or excludes RVA volumes based on the device ID that is assigned within the RVA box |
AV_RVADEVN=xxxxxxxx | X |
| Includes or excludes RVA volumes based on the RVA device name that is assigned to the volume |
AV_RVASSF=xxxxxxxx | X |
| Includes or excludes RVA volumes based on the name of the RVA subsystem frame on which they exist |
AV_SMSGP=xxxxxxxx | X |
| Contains the SMS -assigned storage group name |
AV_SMSI=xx | X |
| Contains the SMS status of the volume: M = SMS managed, QA = SMS quiesced all, QN = SMS quiesced new, DA = SMS disabled all, DN = SMS disabled new, UN = Not SMS managed, NA = Unknown |
AV_SSID=xxxx | X |
| Includes or excludes RVA volumes based on the subsystem ID |
AV_STORGRP=xxxxxxxx |
| X | Contains the SMS-assigned storage group name |
AV_TBYTE=nnnnnnnnnnnnnnnnnn | X |
| Specifies the number of bytes on the volume(0-9223372036854775807) |
AV_TSIZE=nnnnnnnnnn | X |
| Specifies total volume size in tracks (1-8 characters) |
AV_UBYTE=nnnnnnnnnnnnnnnnnn | X |
| Specifies the number of used bytes on the volume(0-9223372036854775807) |
AV_UBYTEB>nnnnnnnnnn | X |
| Specifies the amount of used space on a non-EAV volume or in the BAS area of an EAV volume in bytes |
AV_UBYTEE>nnnnnnnnnn | X |
| Specifies the amount of used space in the EAS area of an EAV volume in bytes |
AV_UCB=hhhh | X |
| Contains the device number for the volume(4 hexadecimal digits) |
AV_USEDEXTS=nnnnnn | X |
| Includes or excludes volumes based on the number of used extents on the volume |
AV_USIZE=nnnnnnnnnn | X |
| Indicates the number of tracks used on the volume (0-2147483647) |
AV_USIZEB>nnnnnnnnnn | X |
| Specifies the amount of used space on a non-EAV volume or in the BAS area of an EAV volume in tracks |
AV_USIZEE>nnnnnnnnnn | X |
| Specifies the amount of used space in the EAS area of an EAV volume in tracks |
AV_VOL=xxxxxx | X |
| Contains the volume serial number (1-6 characters) |
AV_VPCTF=nnn | X |
| Specifies the VVDSF percentage full from 0 to 100 |
AV_VPCTFT=nnnn | X |
| Specifies the volume VVDS percentage full in tenths(0 to 1000) |
AV_VSIZE=nnnnnnnnnn | X |
| Specifies the total size of the VVDS in tracks |
AV_VTOCF=nnn | X |
| Specifies the percentage of used VTOC space (0-100) |
AV_VTOCFT=nnnn | X |
| Specifies the VTOC percentage full in tenths (0-1000) |
AV_VTOCI=xxx | X |
| Contains the VTOC index status: ACT, INA, UND, DIS |
AV_VTOCZ=nnnnnnnnnn | X |
| Contains the volumes VTOC size in tracks (0-2147483647) |
AVL=nnnnn |
| X | Indicates the average block or record length (1-32,767) |
BACKCMD=YES | NO | Y | N |
| X | Specifies the DFSMShsm backup on command |
BACKPCMD=YES | NO | Y | N | X |
| Specifies whether this backup is command initiated |
BACKUP=YES | NO | Y | N |
| X | Specifies the DFSMShsm ML0-ML2 migration without backup |
BCDS=Y|N | X |
| Specifies if DFSMShsm BCDS information should be collected when performing a VTOC scan |
BCDS_ACTSIZ=Y|N | X |
| Specifies if DFSMShsm backup space usage should be actual or an estimate |
BKPTOTV=nnnn | X |
| Specifies the total number of HSM backup versions that HSM will retain for the cataloged data set |
BKPVER=nnnn | X |
| Specifies the current number of HSM backup versions for the cataloged data set |
BLKSIZE=nnnnn | X | X | Indicates the block size of data set (0-32,760) |
BOXSERIAL=boxSerial | X |
| Specifies the 5-position box serial number |
BUFSP=nnnnnn | X | X | Indicates the buffer space for VSAM data sets (0-16776704) |
BYPASS_ENQ=YES | NO | Y | N |
| X | Indicates whether the ENQ on the SYSDSN resource should be bypassed before expanding the PDS directory |
BYTES=nnnnnnnnnnK,M,G,T | X |
| Specifies the amount of space in bytes on the candidate volume |
CAL=YES | NO | Y | N |
| X | Adjusts date by nonworking day calendar |
CALAGE=nnnn | X |
| Specifies calendar-adjusted unreferenced day count (0-9999) |
CAND_VOL=volser|volserMask | X |
| Specifies the volume serial number of the candidate volume that is being taken from the candidate pool |
CANDIDATE=YES | NO | Y | N |
| X | Indicates candidate volume accepted |
CAT=xxxxxxxxxxxxxxxxxx | X |
| Indicates catalog name (1-44 characters) |
CATALOG=YES | NO | Y | N | X | X | Allows or removes IDCAMS CATALOG parameter |
CATLGTDS=Y | N | YES | NO | X |
| Specifies whether a cataloged tape data set is selected |
CATLGVER =ONLY | N | NO | Y | YES | X |
| Indicates whether backup versions of data sets cataloged on the correct volume and at the time that the backup version was made are to be displayed by EZSRMHSM view SMBKVR |
CISIZE=(nnnnnn,nnnnnn) | X | X | Indicates the VSAM data or index control interval size (0-999999) |
COMP=YES | NO | Y | N |
| X | Indicates the cartridge tape data set compression |
CONTIG=YES | NO | Y | N | X | X | Specifies whether a data set is allocated with contiguous space required |
CREATEDAGE=nnnnn | X |
| Specifies the unadjusted day count since the creation date (0-99999) |
CREATEDATE=yyyy/mm/dd | X |
| Specifies the date when the data set was created |
CREATEDCAGE=nnnnn | X |
| Specifies the calendar-adjusted day count since the creation date (0-99999) |
CRITBIAS=nnn |
| X | defines the number of data sets that can reside on the volume before the current allocation |
CRITEMC=YES | NO | Y | N |
| X | Specifies whether the volume meeting CRITDSN criteria includes EMC physical volumes |
CRITFAIL=YES | NO | Y | N |
| X | Defines the allocation if a volume meeting the criteria cannot be found |
CRITLIST=xxxxxxxx |
| X | Is the name of the table containing the allocation volumes |
CURDAY=xxxxxxxxxx | X |
| Includes or excludes the data set if the specified day is met |
CURSPACE=nnnnnnK,M,G,T | X |
| Indicates the current size of data set (0-999999K,M,G,T) |
CURTIME=nn:nn:nn | X |
| Indicates the current time expressed as HH:MM:SS |
DADSM_FUNC=xxxxxx,xxxxxx,... | X |
| Indicates the current location in the allocation process (JCL, ALLOCATE, EXTENDNV, RENAME, VOLSEL) |
DATACLAS=xxxxxxxx | X | X | DFSMS Data Class name (1-8 characters) |
DD=xxxxxxxx | X |
| Indicates the data definition statement name (1-8 characters) |
DEF_SPCUNIT=TRK |CYL | REC | KB |MB |
| X | Specifies the space unit of the PQTY and SQTY keywords and the space unit used in allocation of the data set for VSAM IDCAMS-defined data sets |
DEFUNIT=xxxxxxxx |
| X | Is a generic unit name for volumes outside the silos |
DESC=xxxxxxxxxx... |
| X | Associates a text description with a solution |
DEVTYPE=xxxx | X |
| Device type (DASD, 3380, 3390, TAPE, UNKN) |
DIR_BLOCKS= RLST parameter |
| X | Specifies the number of directory blocks to add to the PDS that experiences an out-of-space condition on the directory |
DIR=nnnnn | X | X | Sets number of directory blocks for partitioned data sets (1-32767) |
DISPn=xxxxxx | X |
| Indicates the data set disposition, n=1-3 (NEW, KEEP, and so on) |
DPORDEF=nnn |
| X | Indicates the default response time for device selection (0-999) |
DPORMAX=nnn |
| X | Indicates the maximum response time target for device selection (0-999) |
DPORMIN=nnn |
| X | Indicates the minimum response time target for device selections (0-999) |
DPORSEP=nnn |
| X | Indicates the separation factor for device selection (0-999) |
DPOWIND=nnnn |
| X | Indicates the interval for device selection based on performance(0-999) |
DSN=xxxxxxxxxxxxxxxxx | X | X | Indicates the data set name (1-44 characters) |
DSNAME=xxxxxxxxxxxxxxxxx | X |
| Is a synonym (see DSN) |
DSNn=xxxxxxxx | X | X | Indicates the data set name qualifier, n=1-8 (1-8 characters) |
DSNTYPE=xxx | X |
| Indicates the data set name type (PDS, LIB, HFS, LRG, PIP, STR, DB2, IAM) Will not be set to IAM during NOCATLG2, SPACSWIR, or SPACPRIM processing. The use of IAM with DSNTYPE is deprecated and may be removed in a future release. To test whether a data set is an IAM data set use the IAM_DS keyword. |
DSORG=xx | X | X | Indicates the data set organization (PS, PO, IS, VS, DA, --) |
DSORGE=xx | X | X | Indicates the data set organization (HFS, PS, PSU, DA, DAU, PO, POU, VS, IS, --) |
DSORGF=xx | X | X | Indicates the data set organization (PDSE, HFS, PS, PSU, DA, DAU, PO, POU, VS, IS, --) |
DSTYPE=xxxx | X |
| Indicates the data set type (PERM, TEMP, GDG) |
DYNALLOC=YES | NO | Y | N | X |
| Specifies whether allocation is dynamic |
ENVIR=xxxxxxx | X |
| Indicates the DFSMS allocation environment |
ERASE=YES | NO | Y | N | X | X | allows or removes IDCAMS ERASE parameter |
EVENTID=xxxxx | X | X | Specifies an event identifier |
EXPDT=yyyyddd | X | X | Indicates the expiration (Julian) date for a data set |
EXPTYPE=x | X |
| Specifies the expiration type to select |
EXPTYPENUM=nnnnn | X |
| Specifies the numerical value in the expiration date field to select |
EXTENT=nnn | X |
| Indicates the number of extents (1-123) |
FDEV=xxxxxx | X |
| Specifies the device type of the primary volume from which data set was migrated/backed up by HSM |
FILESEQ=nnnnnn | X |
| Indicates the file sequence number (0-999999) |
FORCE=YES | NO | Y | N |
| X | overrides program specified block size |
FREESIZE=nnnnnnnnnnK | M | G | T | X |
| Includes or excludes the data set based on the free space that existed in the data set at the high-water mark at the time of allocation |
FUNCTION=xxxxxxxx | X |
| Specifies the name of the current function |
GDGVER=nnn | X |
| Contains the relative version number (0-255), relative to the current generation of a GDG data set |
HDPODAYS=(MO | TU | WE | TH | FR | SA | SU) |
| X | Indicates the days of the week used in determining performance statistics for pooling |
HDPOETIM=nnnn |
| X | Indicates the ending time each day for a range of snapshots to be analyzed (0-2359) |
HDPORDEF=nn |
| X | Indicates the default response time for device selection (0-999) |
HDPORMAX=nn |
| X | Indicates the maximum response time target for device selection (0-999) |
HDPORMIN=nn |
| X | Indicates the minimum response time target for device selection (0-999) |
HDPORSEP=nn |
| X | Indicates the separation factor for device selection (0-999) |
HDPOSTIM=nnnn |
| X | Indicates the starting time each day for a range of snapshots to be analyzed (0-2359) |
HLQ=xxxxxxxx | X |
| Indicates the HLQ of data set name (1-8 characters) |
HSM_#PEND_G=nnnnn | X |
| Contains the total number of pending recall requests |
HSM_#PEND_L=nnnnn | X |
| Contains the number of pending recall requests requested on local system |
HSM_#SAME_G=nnnnn | X |
| Contains the total number of pending recall requests for the same user |
HSM_#SAME_L=nnnnn | X |
| Contains the number of pending recall requests for the same user originated on local system |
HSM_ACTION=xxxxxxxxxxxxxx | X |
| Filters the action, ACTION, from the message text for ARC0734I |
HSM_ACTIVE=YES | NO | Y | N | X |
| Indicates whether the recall request is currently being processed by HSM (Y) or still waiting to be processed (N) |
HSM_AGE=nnnn | X |
| Filters the age of the data set as contained in the message text for ARC0734I |
HSM_BLOCKS=nnnnnn | X |
| Filters the number of blocks as contained in the message text for ARC0734I |
HSM_CANCEL= YES | NO | Y | N |
| X | Specifies that the recall request that is to be canceled |
HSM_DUPL= YES | NO | Y | N | X |
| Indicates whether the current recall request is a duplicate of a currently outstanding request |
HSM_FRVOL=xxxxxx | X |
| Filters the from volume, FRVOL, in the message text for ARC0734I |
HSM_HOST=xx | X |
| Filters the host ID of the DFSMShsm address space issuing the message |
HSM_JOBNAM=xxxxxxxx | X |
| Contains the job name of the recall that requests job |
HSM_MLV=x | X |
| Specifies the migration level volume |
HSM_MSGID=xxxxxxxx | X |
| Filters the ARC message number |
HSM_PRTY=nnn | X | X | Specifies the recall request priority that is set by the Return Priority (ARCRPEXT) installation exit |
HSM_RC=nnnn | X |
| Filters the return code indicated in the message text |
HSM_REAS=nnnn | X |
| Filters the reason code indicated in the message |
HSM_SIZE=nnnnnnnnnnnnnnnnnn | X |
| Specifies the migrated data set size(0-9223372036854775807) |
HSM_SOURCE=TSO | TMP | OPER | BATCH | INT | X |
| Indicates the source from which a recall request was generated |
HSM_STRING=’text’ | X |
| Filters a string found in the message text |
HSM_TIME_EX=hhmmss | X |
| Specifies the elapsed time since DFSMShsm started executing the recall request. |
HSM_TIME=hhmmss | X |
| Specifies the elapsed time since the recall was requested |
HSM_TOVOL=xxxxxx | X |
| Filters the to volume, TOVOL, in the message text for ARC0734I |
HSM_TRACKS=nnnnn | X |
| Filters the number of tracks as contained in the message text for ARC0734I |
HSM_TRKS=nnnnnnnnnn | X |
| Contains the migrated data set size in tracks |
HSM_USERID=xxxxxxxx | X |
| Specifies the user ID of the recall requestor |
HSM_WAIT=YES | NO | Y | N | X |
| Indicators whether the recall requestor is waiting for the recall completion |
HSM=YES | NO | Y | N | X |
| Flags a DFSMShsm migration or backup data set |
HSMAAGE=nnnnn | X |
| Specifies the number of calendar-adjusted days since the data set was migrated or backed up |
HSMAGE=nnnnn | X |
| Specifies the number of days since the HSM backup/migration of the data set was made |
HSMCMD= ‘hsmCommand’ |
| X | Specifies an HSM command to be issued for each record in the SET result group |
HSMCMPR=nnn | X |
| Specifies the degree of compression of the migrated copy of the data set, expressed as a percentage of the original size |
HSMDATE=yyyy/mm/dd | X |
| Specifies the date when the HSM backup/migration of the data set was made |
HSMDEV=D|T | X |
| Specifies media used for making the last HSM backup/migration |
HSMDSN=dsn | X |
| Specifies the data set name of the HSM backup/migration copy of the data set |
HSMDSN=xxxxxxxx | X |
| Specifies the DFSMShsm migration or backup data set name (1-44 characters) |
HSMEXPDT=yyyy/mm/dd | X |
| Specifies the expiration date of the data set that existed when HSM migrated this data set |
HSMSIZE=nnnnnnnnnn | X |
| Specifies the data set size, in kilobytes, on the HSM backup/migration volume |
HSMTIME=hh:mm:ss | X |
| Shows the time of day when the HSM backup/migration of the data set was made |
HSMVOL=xxxxxx | X |
| Specifies the HSM volume to which the data set backup/migration was made by HSM |
HWMSIZE=nnnnnnnnnnK,M,G,T | X |
| Includes or excludes the data set based on the high-water mark allocation size |
IAM_DS=YES | NO | Y | N | X |
| Indicates whether the data set is an IAM data set Internally the value may be null if the determination has not been made. |
IMBED=YES | NO | Y | N | X | X | Allows or removes IDCAMS IMBED parameter |
IN_ATL_LIB=Y | N | YES | NO | X |
| Specifies whether a tape data set in an Automated Tape Library is selected |
IN_VTS_LIB=Y | N | YES | NO | X |
| Specifies whether a tape data set in a Virtual Tape Library is selected |
JCL_SPCUNIT=BLK | CYL | KAV |MAV |TRK | UAV |
| X | Specifies the space unit of the PQTY and SQTY keywords and the space unit used in allocation of the data sets that are not VSAM IDCAMS-defined data sets |
JOB_DEST=xxxxx |
| X | When used in conjunction with the ACT_JOB parameter, determines the destination of the tailored JCL that is produced by the solution |
JOB_GROUP=YES | NO | Y | N |
| X | Specifies whether the Automation component will group each resource matching the SET statement into one batch job or if each resource matching the SET statement will be included in individual jobs |
JOB=xxxxxxxx | X |
| Indicates the job, TSO, or STC name (1-8 characters) |
JOBACCTn=xxxxxxxxxx | X |
| Indicates the job account field, n=1-3 (1-20 characters) |
JOBCLASS=x | X |
| Indicates the job class (1 character) |
JOBSDAY=xxxxxxxx | X |
| Indicates the job start day (1-8 characters) |
JOBSTIME=nn:nn:nn | X |
| Indicates the job start time expressed as HH:MM:SS |
JOBTYPE=STC | TSO | JOB | X |
| Specifies the type of job that issued a request (STARTED TASK/TIME SHARING USER/BATCH JOB) |
LABELTYP=xxx | X |
| Determines tape label characteristics |
LAST_VOL=Y | N | YES | NO | X |
| Specifies whether this volume is the last volume in the list of candidate pool volumes |
LBKPVER=nnnn | X |
| Specifies the absolute number that uniquely identifies the last backup version |
LEVEL=n | X |
| Specifies the account level being processed by the application collector (a value from1-4) |
LIMIT=nnnnnnnnK,M,G,T |
| X | Indicates the data set size limit in K,M,G,T (1-99,999,999) |
LLQ=xxxxxxxx | X | X | Indicates the LLQ of data set name (1-8 characters) |
LREADAGE=nnnnn | X |
| Specifies the unadjusted day count since the data set was last read (0-99999) |
LREADCAGE=nnnnn | X |
| Specifies the calendar-adjusted day count since the data set was last read (0-99999) |
LREADDATE=yyyy/mm/dd | X |
| Specifies the date when the data set was last read |
LRECL=nnnnn | X |
| Indicates the logical record length (1-32,760) |
LREF=yyyy/mm/dd | X |
| Specifies the most recent date on which the migrated data set was referenced |
LWRITEAGE=nnnnn | X |
| Specifies the unadjusted day count since the data set was last written (0-99999) |
LWRITECAGE=nnnnn | X |
| Specifies the calendar-adjusted day count since the data set was last written (0-99999) |
LWRITEDATE=yyyy/mm/dd | X |
| Specifies the date when the data set was last written |
MAXQLF=nn |
| X | Indicates the maximum number qualifiers in data set name (1-99) |
MAXSIZE=nnnnnnnnnnK,M,G,T | X |
| Indicates the maximum data set size 1-2147483647K |
MGMTCLAS=xxxxxxxx | X | X | Indicates the DFSMS Management Class (1-8 characters) |
MIGCMD=YES | NO | Y | N |
| X | Indicates the DFSMShsm migration on command |
MIGCTLG=Y|N | X |
| Shows the migrated data set cataloged indicator |
MIGDAYS=nnnn |
| X | Indicates the elapsed days until migration (1-9999) (No longer valid for HSMMIGRT) |
MIGLEV=1|2 | X |
| Indicates the migration level of the data set |
MIGRATE=YES | NO | Y | N |
| X | Indicates the migration permission to DFSMShsm |
MIGRTCMD=YES | NO | Y | N | X |
| Specifies whether this migration is command initiated |
MINQLF=nn |
| X | Indicates the minimum number qualifiers in data set name (1-99) |
ML2=YES | NO | Y | N |
| X | Allows direct DFSMShsm migrate from ML0 to ML2 |
MNTYPE=((mmmmmm,n,op),.) | X | X | Indicates the mount type triplets used for compatibility with STOP-X37 |
MNTYPE=xxxxxxx | X | X | Indicates the mount type (PUBLIC, STORAGE, PRIVATE, CURRENT, ALL) |
MODE=ACT | INACT | SIM | X |
| Sets the status of the function |
MSG=I | W | E | S | N | X |
| Indicates the level of messages to be generated |
MTSDSP=Y|N | X |
| Indicates the DFHSM Small Data Set Packing (SDSP) status |
MULTIVOL_DS=Y | N | YES | NO | X |
| Specifies whether a tape data set with a volume sequence number of 2 or more is selected |
NEWAPPL=xxxxxxxxxxxxxx |
| X | Specifies the value of an account code that is used to override the default account code |
NOCATLG2=xxxxxxx |
| X | Indicates the action on a not cataloged 2 condition |
NOCATWHEN=TERM | ALLOC |
| X | Specifies when NOCATLG2 processing will occur for a non-SMS data set |
NOCHECK=xxxxxx |
| X | Specifies checks bypassed in volume switch validation |
NQUAL=nn | X |
| Indicates the number of qualifiers in data set name (1-20) |
NUMBLKS=nnnnnnnnnn | X |
| Specifies the number of blocks (block count) 1-2147483647 |
NUNIT=nn | X |
| Indicates the number of units requested (1-59) |
NVOL=nn | X | X | Indicates the number of volumes that can be allocated to or requested for a non-VSAM data set (1-59) or VSAM data component (1-20) |
NVOLINDX=nn |
| X | Indicates the number of volumes that can be allocated to a VSAM index component (1-20) |
NVOLMAX=YES | NO | Y | N |
| X | Indicates the maximum number of volumes allocated to a data set |
OLDACCT=xxxxxxxxxxxxxx | X |
| Specifies the value of the default account code (1-50 characters) |
OLDDSN=xxxxxxxxxx | X |
| Indicates the old data set name (1-44) |
OLDHLQ=xxxxxxxx | X |
| Indicates the old data set HLQ (1-8 characters) |
OPER=YES | NO | Y | N |
| X | Allows operator to provide volume when system cannot find space for a volume switch |
ORGSIZE=nnnnnnnnnn | X | X | Specifies the original size of data set, in tracks, before it was migrated |
ORIGSIZE=nnnnnnnnnn | X |
| Specifies the original size in kilobytes, of the data set migrated/backed up by HSM |
ORIGTRK=nnnnnnnnnn | X |
| Specifies the number of tracks HSM will allocate at the time the data set is restored/recalled |
ORIGUNIT=xxxxxxxx | X |
| Indicates the unit specified in the JCL 1-8 characters long; cannot be set for SPACPRIM, SPACSECA, SPACSECB, SPACSECR, SPACSWIR, or SPACVOLA |
ORIGVOL=xxxxxx | X |
| Indicates the volume specified in the JCL. 1-6 characters long |
OWNER=xxxxxxxxxxxx | X | X | Assigns an owner ID to a VSAM cluster (1-40 characters); cannot be set for NOCATLG2, SPACSWIR, or SPACPRIM functions |
PCTFREE=nnn | X |
| Includes or excludes the data set based on the free-space percentage for the data set at the high-water mark at the time of allocation |
PCTFREELA=nnn | X | X | Includes or excludes the data set based on the free space percentage in the primary allocation or last secondary extent for the data set |
PCTI=nnnnn |
| X | Specifies the percentage value by which a secondary allocation is increased (1-10000) |
PCTIACT=A | S (PTF BPG7632 applied) | X | Specifies when the secondary-extent percentage increase is activated. Valid values are A (all extents) or S (SPACSECI number). | |
PCTICALC=nn (PTF BPG7632 applied) | X | Specifies how many times to apply the calculated percentage increase to the secondary extent before becoming constant (1-15) | |
PGM=xxxxxxxx | X |
| Indicates the program name (1-8 characters) |
PGMRNAME=xxxxxxxxxx | X |
| Indicates the programmer name job card field (1-20 characters) |
POOL=xxxxxxxx | X | X | Indicates 1-15 pool names (1-8 characters) |
PQTY=nnnnnK,M,G,T |
| X | Indicates the primary quantity space allocation (1-99,999 K,M,G,T) |
PQTYPCT=nnn |
| X | Reduces the primary allocation amount by the specified percentage |
PQTYPCTF=nnn |
| X | Reduces the allocation amount by a percentage of free space in the primary allocation |
PRI_CYL=number | X |
| Specifies the number of primary cylinders on the volume |
PRISPACE=nnnnnn | X |
| Indicates the primary space requested (0-999999) |
PROCSTEP=xxxxxxxx | X |
| Indicates the procedure step name (1-8 characters) |
PURGE=YES | NO | Y | N |
| X | Indicates whether to purge a deleted a data set with an expiration date |
PWDDEL=YES | NO | Y | N |
| X | Deletes passwords specified in control statements |
QUALL=xxxxxxxx | X |
| Is a synonym (see LLQ) |
QUALn=xxxxxxxx | X |
| Is a synonym (see DSNn) |
RACF=xxxxxxxx | X |
| Indicates the IBM RACF group name (1-8 characters) |
RACFGRP=xxxxxxxx | X |
| Indicates the RACF group name (1-8 characters) |
RACFUID=xxxxxxxx | X |
| Specifies the value of the RACF user ID on a JOB card (1-8 characters) |
RAID_TYPE=raidType | X |
| Specifies the raid type of the candidate volume |
RAIDDEVTYPE=xxxxxxxxx | X |
| Allows the user to require a specific RAID device type for an allocation (EMC | RDFEMC | MIRROREMC | PARITYEMC) |
RECFM=xxx | X |
| Indicates the record format |
RECORG=xx | X |
| Indicates the VSAM record organization (RR, ES, KS, LS) |
REFAGE=nnnn | X |
| Indicates the unadjusted unreferenced day count (0-9999) |
REFVOL=xxxxxx | X |
| Indicates the DASD volser from VOL=REF= |
REJECT=YES | NO | Y | N |
| X | Rejects an z/OS request for a specific service |
RELEASE=YES | NO | Y | N | X |
| Indicates the RELEASE flag |
RELGEN#=nn | X |
| Specifies the relative generation number of backup versions |
REORG_NSMS=(xx,pool) |
| X | Indicates the SMRORGxx member name suffix in PARMLIB for DFDSS reorg job control cards; name of pool to which MainView SRM is to reorganize |
REORG_PROC=xxxxxxxx |
| X | Indicates the reorganize proc name for SPACVOLA to start |
REORG_SMS=(xx,storclas) |
| X | Indicates the SMRORGxx member name suffix in PARMLIB for DFDSS reorg job control cards; DFSMS Storage Class to which MainView SRM is to reorganize |
REORG=YES | NO | Y | N |
| X | Indicates whether SPACVOLA processing should automatically start a Started Task to reorganize the file that was just made multivolume by SPACVOLA |
REPL=YES | NO | Y | N | X | X | Allows or removes IDCAMS REPLICATE parameter |
REPLACE=YES | NO | Y | N |
| X | Allows replacement of system value |
RETNCPY =ONLY | N | NO | Y | YES | X |
| Indicates whether retained backup copies are to be displayed by EZSRMHSM view HSMBKVR |
RETPD=nnnn | X | X | Indicates the retention period for data set (0-9999) |
REUSE=YES | NO | Y | N | X | X | Allows or removes IDCAMS REUSE parameter |
RLSE=ALL | SEC | NO |
| X | Indicates the data sets eligible for space release |
ROUND=YES | NO | Y | N | X | X | Indicates the round space to cylinders |
RQ_INTRVL=nnnnn |
| X | Specifies the time interval in minutes between same actions issued by function HSMRQUE |
SCAN=EXIT |
| X | Specifies not to budget space for any level associated with a data set; this parameter is unique to the application collector |
SECALLOCS=nnnnn | X |
| Includes or excludes the data set based on secondary allocations in the last allocation for the data set |
SECSPACE=nnnnnnK,M,G,T | X |
| Indicates the secondary space requested (0-999999K,M,G,T) |
SEP=YES | NO | Y | N | ASIS |
| X | Specifies whether the data and index components of a VSAM key-sequenced data set are allocated to separate volumes in a pool |
SGC_FUNC=xxxxxxx | X |
| Specifies the value of the application function currently being processed (ALLOCATE | EXTENDCV | EXTENDNV | EXTENDVS | RELEASE | RENAME | SCRATCH | BUDGET | BUDDSN | SGCMAINT | SGCRSYNC | SGCHSMR | SVOSISPF) |
SGP_@BUSY=nnn | X |
| Specifies channel path busy threshold for inclusion or exclusion |
SGP_BESCOLT=nnnnnnnn | X |
| Specifies the collected back-end space in tenths of a MB |
SGP_BESFREE=nnnnnnnn | X |
| Specifies the free back-end space in tenths of a MB |
SGP_BESTOTL=nnnnnnnn | X |
| Specifies the total back-end space in tenths of a MB |
SGP_BESUNCL=nnnnnnnn | X |
| Specifies the uncollected back-end space in tenths of a MB |
SGP_CFWHIT@=nnn | X |
| Specifies percentage of DFAST reads satisfied by cache threshold |
SGP_CFWPRSC=nnn | X |
| Specifies number of CFAST writes reads per-second threshold |
SGP_CHPID=xx | X |
| Specifies channel paths to be included or excluded |
SGP_CNTLUID=xx | X |
| Specifies subsystem IDs of cache controllers to be included or excluded |
SGP_CONNTIM=nnnnn | X |
| Specifies the data set connect time threshold in .1 millisecond increments |
SGP_CUBSYDL=nnnnn | X |
| Specifies the control unit busy delay threshold in .1 millisecond increment |
SGP_DFWHIT@=nn | X |
| Specifies percentage of DFAST writes satisfied by cache threshold |
SGP_DFWPRSC=nnn | X |
| Specifies number of DFAST writes per-second threshold |
SGP_DISCTIM=nnnnn | X |
| Specifies the data set disconnect time threshold in .1 millisecond increments |
SGP_DP@BUSY=nn | X |
| Specifies director port busy percentage to be included or excluded |
SGP_DPBSYDL=nnnnn | X |
| Specifies the director port busy delay time threshold in .1 millisecond increments |
SGP_DVBSYDL=nnnnn | X |
| Specifies the device busy delay time threshold in .1 millisecond increments |
SGP_ECMCFBS=nnnnnnnn | X |
| Specifies the ECAM channel programs bypassed due to busy configuration in tenths of a MB |
SGP_ECMMSGS=nnnnnnnn | X |
| Specifies ECAM messages processed in tenths of a MB |
SGP_ECMNSPC=nnnnnnnn |
|
| Specifies the ECAM channels programs bypassed due to no buffer space in tenths of a MB |
SGP_ECMPGMS=nnnnnnnn | X |
| Specifies the ECAM channel programs in tenths of a MB |
SGP_FSCBYRD=nnnnnnnn | X |
| Specifies the collected free space bytes read in tenths of a MB |
SGP_FSCPERC=nnnn | X |
| Specifies the percentage of collected free space in tenths of a percent |
SGP_FSUPERC=nnnn | X |
| Specifies the net capacity load percentage in tenths of a percent |
SGP_IOPRSEC=nnn | X |
| Specifies number of IOs per-second threshold |
SGP_IOSQTIM=nnnnn | X |
| Specifies the data set IOSQ time threshold in .1 millisecond increments |
SGP_LCU@BSY=nn | X |
| Specifies LCU busy percentage to be included or excluded |
SGP_LCUID=xx | X |
| Specifies the logical control unit ID of those controllers to be included or excluded |
SGP_NCL=nnnnnnnn | X |
| Specifies the amount of uncollected free space in bytes |
SGP_NCLPERC=nnnn | X |
| Specifies the percentage of uncollected free space in tenths of a percent |
SGP_NRDHIT@=nnn | X |
| Specifies percentage of normal reads satisfied by cache threshold |
SGP_NRDPSEC=nnn | X |
| Specifies number of normal reads per-second threshold |
SGP_NWRHIT@=nnn | X |
| Specifies percentage of normal writes satisfied by cache threshold |
SGP_NWRTPSC=nnn | X |
| Specifies number of normal writes per-second threshold |
SGP_PENDTIM=nnnnn | X |
| Specifies the data set pending time threshold in .1 millisecond increments |
SGP_RDHIT@=nnn | X |
| Specifies percentage of reads satisfied by cache threshold |
SGP_RDSPRSC=nnn | X |
| Specifies number of reads per-second threshold |
SGP_READ@=nnn | X |
| Specifies the percentage of IOs that are reads threshold |
SGP_RESERV@><nn | X |
| Specifies percentage volume is reserved for inclusion or exclusion |
SGP_RESPTIM=nnnnn | X |
| Specifies the data set response time threshold in .1 millisecond increments |
SGP_RSFNAME=xxxxxxxx | X |
| Specifies the IXPF subsystem frame name |
SGP_SRDHIT@=nnn | X |
| Specifies percentage of sequential reads satisfied by cache threshold |
SGP_SRDPRSC=nnn | X |
| Specifies number of sequential reads per-second threshold |
SGP_SWRHIT@=nnn | X |
| Specifies percentage of sequential writes satisfied by cache threshold |
SGP_SWRPRSC=nnn | X |
| Specifies number of sequential writes reads per-second threshold |
SGP_WRHIT@=nnn | X |
| Specifies percentage of writes satisfied by cache threshold |
SGP_WRITE@=nnn | X |
| Specifies percentage of IOs that are writes threshold |
SGP_WRPRSEC=nnn | X |
| Specifies number of writes per-second threshold |
SHOWSIZE=Y | N | YES | NO |
| X | Specifies whether SMAT variables should be displayed for debugging problems with MainView SRM rules |
SHOWSMAT=Y | N | YES | NO |
| X | Specifies whether SMAT variables should be displayed for debugging problems with MainView SRM rules |
SIZE=nnnnnnnnnnK,M,G,T | X | X | Size of either primary extent or of primary X 2 secondary extent, 1-2147483647K |
SMF=I | W | E | S | N | X |
| Indicates the level of messages to be generated to SMF |
SMS=Y | N | YES | NO | X | X | Is a synonym (see SMSMANAGED) |
SMSGROUP=xxxxxxxx | X |
| Specifies the SMS storage group to which the primary volume of the backed up or migrated data set was assigned |
SMSMANAGED=YES | NO | Y | N | X | X | Specifies whether a resource is managed by DFSMS |
SMSNVOL=YES | NO (PTF BPG7644 applied) | X | Specifies whether to use the NVOL value to change the number of volumes allocated to a non-VSAM SMS-managed data set in the DASDPOOL function | |
SMSPOOL_EXT=(xxxxxxxx,xxxxxxxx,...) |
| X | Defines an SMSPOOLs to be used during DADSM EXTEND for SMS-managed data sets |
SMSPOOL=(xxxxxxxx,xxxxxxxx,...) |
| X | Defines an SMSPOOLs to be used during DADSM ALLOCATE for SMS-managed data sets |
SOLUTION=xxxxxxxx | X |
| Contains the solution value from the originating AUTO function command (1-8 characters) |
SORT=(fldname,x,fldname,x...) |
| X | Specifies the fields to sort prior to taking any actions on the group |
SPACPRIM=(nn,nn) |
| X | Indicates the lower limit and decrement percentage for space reduction (0-90) |
SPACSECA=nnnn |
| X | Secondary space as a percentage of primary (1-9999) |
SPACSECB=nn |
| X | Indicates the lower limit for space reduction (0-100) |
SPACSECI=nn |
| X | Indicates the extent limit, secondary space enlargement (1-15) |
SPACSECR=nnn |
| X | Specifies a percentage and floor limit for space reduction |
SPACSWIR=(nnn,nnn) |
| X | Specifies the lower limit and decrement of space reduction (0-100) |
SPACVOLA=nn |
| X | Indicates the maximum volumes to extend a data set (1-59) (does not support SAS data libraries) |
SPECIFIC=YES | NO | Y | N | X |
| Indicates the specific or non-specific volume specification |
SPLIT=YES | NO | Y | N |
| X | Specifies whether to split unit affinities with STK silos |
SQTY=nnnnnK | M | G | T |
| X | Indicates the secondary quantity space allocation(0-99999K,M,G,T) |
SQTYPCT=nnn |
| X | Reduces the secondary allocation amount by a percentage |
SQTYPCTF=nnn |
| X | Reduces the secondary allocation amount by a percentage of free space in the last secondary extent |
STACKDS=Y | N | YES | NO | X |
| Specifies whether a tape data set with a file sequence number of 2 or more is selected |
STEP=xxxxxxxx | X |
| Indicates the jobstep name (1-8 characters) |
STEPACCTn=xxxxxxxxxxx | X |
| Indicates the step account field, n=1-3 (1-20 characters) |
STORCLAS=xxxxxxxx | X | X | Indicates the DFSMS Storage Class of data set (1-8 characters) |
STORGRP |
| X | is a synonym (see STOGROUP) |
STOGROUP=storageGroupName or STORGRP=storageGroupName | X | X | Specifies the storage group that will contain the new volume |
STRIPCNT=nnnnnnnn | X |
| Determines the number of stripes the data set has (1-99999999) |
STRIPTY=SS | SM | VS | X |
| Indicates the type of extended format data set |
SUPVOL=YES | NO | Y | N |
| X | Suppresses requests for specific volumes |
SVOSCMD=’svosCommand’ |
| X | Specifies an SVOS command to be issued for each record in the SET result group |
SYSCMD=’systemCommand’ |
| X | Specifies an MVS or JES command to be issued for each record in the SET result group |
SYSID=xxxx | X | X | Indicates the z/OS system ID (1-4 characters) |
TAPE_EXPDT=yyyy/mm/dd | X |
| Specifies the tape data set expiration date |
TAPELOC=xxxxxxxx | X |
| Specifies the tape data set location as determined by the Tape Management Software |
TEMPDSN=YES | NO | Y | N | X |
| Flags temporary data sets |
TRKCYL=nn |
| X | Indicates the tracks per cylinder source for SPACCONV |
TRKLEN=nnnnn |
| X | Indicates the bytes per track of source for SPACCONV |
UNIT_ADDR=unitAddress | X |
| Specifies the unit address of the candidate volume |
UNIT=xxxxxxxx | X | X | Indicates the unit name (generic or esoteric) 1-8 characters long |
USECPOOL=YES | NO | Y | N |
| X | Searches current pool first for an additional volume |
USER=xxxxxxxx | X |
| Indicates the user name (1-8 characters) |
USEVOL=xxxx |
| X | Directs volume allocation to STOR, PRIV, ALL |
USRCn=xxxxxxxx | X | X | is a character field for user-specified variable 1-8 characters long; the value of n can be 1-10 (for example USRC1, USRC2, and so forth) |
USRNy=nnn | X | X | Is a numeric field for a user-specified variable not to exceed 214783647; the value of y can be 1-10 (for example USRN1, USRN2, and so forth) |
VCOMPLLQ=xxxxxxxx | X | X | Indicates the LLQ of VSAM component (1-8 characters) |
VENDOR=vendor | X |
| Specifies the vendor name |
VFORCE=YES | NO | Y | N |
| X | Adds standard component suffixes (DATA, INDEX) to VSAM file names |
VIO=YES | NO | Y | N |
| X | Directs data sets to VIO |
VOL_DEVTYPE=devType | X |
| Specifies the emulated device type of the candidate volume |
VOL=xxxxxx | X | X | Indicates the volume name (1-6 characters) |
VOLSEL=xxxxxxxx |
| X | Indicates the volume selection criteria |
VOLSER=((xxxxxx,n,op),.) |
| X | Indicates the volume serial ID triplets used for compatibility with STOP-X37 |
VOLSER=xxxxxx |
| X | Indicates the volume serial ID (1-6 characters) |
VSAM_DEFINE=Y | N | X |
| Includes or excludes the data set based on whether it is a VSAM-defined data set |
VSAMCOMP=xxxxx | X |
| VSAM data set comp type (DATA, INDEX) |
VSAMDEF=xxxxxxx | X |
| VSAM data set cluster definition |
VSAMSEP=YES | NO | Y | N | X |
| Indicates data and index components are on separate volumes |
VSNVS=V|N | X |
| Indicates whether the data set is VSAM or non-VSAM |
VTS_LIBNAME=xxxxxxxx | X |
| Specifies the name of a Virtual Tape Library |
WINDOW_DAYS=xxxxxxx |
| X | Specifies the days of the week on which the solution can run |
WINDOW_END=hhmm |
| X | Indicates an end time of day prior to which the solution can run |
WINDOW_STRT=hhmm |
| X | Indicates a start time of day after which the solution can run |
XMODE=STC | TSO | JOB | X |
| Indicates the job execution mode |