Installing IAM/IAMPLEX

This topic describes how to install the BMC AMI Storage IAM/IAMPLEX product.

Use the following procedure to install IAM/IAMPLEX version 11.0.00:

Related topics

IAM Installation Introduction

Installation-cautions

Run the BMC Installer and accept the EULA license.
On the Execute Project panel, select 1. Select Products, Solutions, or Infrastructure and press Enter.
Execute Project
Command ===>

Project Name . . . INSTALL
Description . . . INSTALL
JCL Data Set . . . IAM.INSTALL.JCL

Select one of the following installation actions:
1    1. Select Products, Solutions, or Infrastructure
      2. Set SMP/E Data Set High Level Qualifiers
      3. Set SMP/E Data Set Allocation Values
      4. Set Installation Job Values and FTP Options
      5. Generate and Execute Installation Batch Jobs

Select one of the following configuration actions:
      1. Set Runtime Data Set High Level Qualifiers
      2. Set Runtime Data Set Allocation Values
      3. Set Selected Product or Component Values
      4. Set Configuration Job Values
      5. Generate and Execute Configuration Batch Jobs
On the Category Selection panel, select System Management or ALL Products to access IAM and press Enter.
Category Selection
COMMAND ===>

Select the categories for the products and solutions to be installed.
Press Enter to continue or F12 to go back.

Line Cmds: Select

Cmd Product and Solution Category
--- ---------------------------------------------------
     Db2 Management
     IMS Management
s   System Management
     ALL Products
On the INSTALL - System Management panel, use the Enter key to navigate through the Products and Solutions column, select BMC AMI Storage IAM/IAMPLEX and press Enter.
                   IAM0721 - All Products
COMMAND ===>

Select the products and solutions to be installed. A '+' in the Sub column
indicates an included subcomponent can be deselected. Press Enter to continue
or F12 to backup.

Line Cmds: Select, Expand, Info

Cmd Sub Products and Solutions                      Version   PCode
--- --- -----------------------------------------   -------   -----
  s        BMC AMI Storage IAM/IAMPLEX                 11.0.00    IAM
           BMC AMI Storage StopX37/II Stand Alone       8.1.00    BBV
           BMC AMI System Administration for IMS        2.9.00    IPT
           BMC AMI System Communication for IMS         1.6.00    CSU
           BMC AMI SQL Explorer for Db2                13.1.00    PSS
           BMC AMI SQL Performance for Db2             13.1.00    BQL
           BMC AMI Unload for Db2                      13.1.00    UEA
           BMC AMI Unload-Load for Db2                 13.1.00    SUL
           BMC AMI Utilities for Db2                   13.1.00    BHU
           BMC AMI Utility Management for Db2          13.1.00    UNA
           BMC AMI Utility Manager for Db2             13.1.00    UUA
When the Install System Selected Products and Solutions panel is displayed with the version and release date of the IAM product, press Enter.
                  Install System Selected Products and Solutions
COMMAND ===>

Below are the products and solutions that were selected for installation.
If these are incorrect, press F12 to return to the Product and
Selection Screen to reselect. If correct, press Enter to continue.



Products and Solutions                              Version   Release Date
BMC AMI Storage IAM/IAMPLEX                         11.0.00   April 2023
Warning
Do not change the Target Zone and DLIB Zone fields.
Follow the instructions displayed on the INSTALL - SMP/E Data Sets and Options panel to set up the SMP/E data set. You can change the data set names.
                    INSTALL - SMP/E Data Sets and Options
Command ===>                                                  Scroll ===> CSR

Enter the SMP/E data set HLQs and zone names. Press enter after typing a value
in the Quick Fill field to set the other HLQs. Enter a '/' in the Quick Clear
field to clear the HLQs.
                                                                    More:     +
Quick Clear . . .
Quick Fill. . . .
CSI Data Set HLQs and Zone                        Enter "/" to select option
   Global. . . . . IAM.INSTALL                    Use existing Global
   Target. . . . . IAM.INSTALL                    Use existing Target & DLIB
   DLIB. . . . . . IAM.INSTALL                  / Use default BMC MLQs
   Target Zone . . BMC0TZN DLIB Zone . . BMC0DZN    Use existing zone names
Other Data Set HLQs
   SMPPTS. . . . . IAM.INSTALL
   Aux Libs. . . . IAM.INSTALL
   SMPTLIB . . . . IAM.INSTALL
   Target Libs . . IAM.INSTALL
   DLIB Libs . . . IAM.INSTALL
Data Sets To Use for BMC Product Execution
   Change Values. . . . 1 1. Non SMP/E (runtime) data sets to which the SMP/E
                              Target data sets will be copied (recommended)
                           2. The SMP/E Target data sets themselves
Data Set HLQs *
  Temporary Files HLQ. . . . . IAM.INSTALL      (max resolved length is 17)
Follow the instruction displayed on the INSTALL - SMP/E Data Set Allocation Values panel to provide SMP/E data set allocation values.
                  INSTALL - SMP/E Data Set Allocation Values
Command ===>                                                  Scroll ===> CSR

Enter the Allocation Values for the Project. SMS values will be used when
specified. Press enter after entering a value in the Quick Fill to set the
other Allocation Values. Enter a '/' in the Quick Clear fields to clear the
values in that column.

Quick Clear . . . . . . . . . .
Quick Fill . . . . . . . . . .

Data Set Type                   STORCLAS MGMTCLAS DATACLAS UNIT      VOLSER
   Temporary Work Files          DEVSMS                        SYSALLDA
   SMP/E Global CSI              DEVSMS                        SYSALLDA
   SMP/E Target CSI              DEVSMS                        SYSALLDA
   SMP/E Target Libraries        DEVSMS                        SYSALLDA
     Increase Allocation by 0   %
   SMP/E Distribution CSI        DEVSMS                        SYSALLDA
   SMP/E Distribution Libraries DEVSMS                        SYSALLDA
     Increase Allocation by 0   %
   SMP/E Data Sets (Aux, TLIB)   DEVSMS                        SYSALLDA
On the INSTALL - Installation Job Values & FTP Options panel, enter the job card for the installation jobs.
Download the BMC product by entering Y next to your preferred download method and pressing Enter. You can download the product using File Transfer Protocol (FTP), File Transfer Protocol Secure (FTPS), Secure File Transfer Protocol (SFTP), or physical media or Distributed FTP.

                INSTALL - Installation Job Values & FTP Options
Command ===>                                                  Scroll ===> CSR

Enter the Generated Job options for the installation jobs.
                                                                   More:     +
Job Card Template
  //XXXXXXXX JOB (XXXX,XXXXX),'XXXX',CLASS=A,MSGCLASS=X,
  //      NOTIFY=&SYSUID
  //*
  //*

Job Name Options
  Match generated member names . . . . . Y (Y=Yes, N=No) (Both options cannot
  Suffixed with member name number . . . N (Y=Yes, N=No) contain 'Y')

How will the BMC products be downloaded (select only one method)
  Use File Transfer Protocol (FTP) . . . . . . N (Y=yes, N=no)
  Use File Transfer Protocol Secure (FTPS) . . Y (Y=yes, N=no)
  Use Secure File Transfer Protocol (SFTP) . . N (Y=yes, N=no)
  Use physical media or Distributed FTP . . . N (Y=yes, N=no)

SFTP Options
  UNIX File System Option
    Root directory for BMC file path . . .
    /tmp
  Site has a Firewall/Proxy . . . . . . . . . N (Y=yes, N=no)
    Update Firewall/Proxy credentials . . . . N (Y=yes, N=no)
  SFTP Connection - Firewall/Proxy Parameters . . .
    sh sftp -vvv mainframe@filedownload.bmc.com


FTP Options
  Directory . . . GA (GA or BETA)
On the INSTALL - Installation Job Values & FTP Options panel after downloading the BMC product, press ENTER to proceed to the Installation JCL Generation panel. Press Enter to continue.
                        Installation JCL Generation     Project INSTALL saved
Command ===>

Select an option. Press Enter to continue or F12 to go back.

S Generate JCL into IAM.INSTALL.JCL
   Skip generation process and display next panel





   Member   Status     Function
   $100DOC             Unload Doc
   $103DWNL            Download of Product Files
   $104DCMP            Decompress of Product Files
   $105SMPE            Define/Create/Update SMP/E Env
   $106SMPE            Build/Update SMP/E Env
   $130RECP            Receive Products
   $145RECS            Receive Maintenance
   $150HOLD            Receive BMC HOLD Data
   $155LIST            List Hold Data
   $160DOCL            Print PTF Doc from Maint Files
The Installation JCL Execution Review panel confirms that installation jobs were generated.
                   Installation JCL Execution Review
Command ===>

Several jobs were generated into the following library:
   IAM.INSTALL.JCL

Review and submit those jobs whose names start with $1 in the sequence implied
by the 3rd and 4th characters of the jobname. Execute the jobs one at a time.
Do not skip any of the jobs because they are generally dependent on the jobs
earlier in the sequence. The jobs should complete without abends or return
codes greater than 4 unless documented otherwise in the job's documentation.

The exceptions are the #D9 jobs. If generated, these jobs should
only be submitted when you want to remove the installed product(s)
libraries from your environment.

If any installation steps remain, a $100DOC member is created
containing documentation which describes these remaining steps.



Press Enter to display an Edit member list of the $1 generated jobs.
Press ENTER to access the PDS where the jobs are generated.
Command ===>                                                  Scroll ===> CSR
    Name     Prompt          Size    Created           Changed            ID
. $$$READ
. $IJCKLST
. $100DOC                    104   2023/03/03   2023/03/03 02:06:19    IAM
. $103DWNL                   125   2023/03/03   2023/03/03 02:06:48    IAM
. $104DCMP                    97   2023/03/03   2023/03/03 02:06:48    IAM
. $105SMPE                   473   2023/03/03   2023/03/03 02:06:48    IAM
. $106SMPE                   423   2023/03/03   2023/03/03 02:06:48    IAM
. $130RECP                    79   2023/03/03   2023/03/03 02:06:48    IAM
. $145RECS                   119   2023/03/03   2023/03/03 02:06:48    IAM
. $150HOLD                    51   2023/03/03   2023/03/03 02:06:48    IAM
. $155LIST                    45   2023/03/03   2023/03/03 02:06:48    IAM
. $160DOCL                    38   2023/03/03   2023/03/03 02:06:48    IAM
. $165MNTD                    40   2023/03/03   2023/03/03 02:06:48    IAM
. $175APCF                    89   2023/03/03   2023/03/03 02:06:48    IAM
. $176APLF                    88   2023/03/03   2023/03/03 02:06:48    IAM
. $177ACCF                    62   2023/03/03   2023/03/03 02:06:48    IAM
. $178ACPF                    61   2023/03/03   2023/03/03 02:06:48    IAM
. $180APCP                    85   2023/03/03   2023/03/03 02:06:48IAM
Important
You should follow the following job sequence:
$103DWNL
$104DCMP
$105SMPE
$106SMPE
$130RECP
$145RECS
$150HOLD
$155LIST
$160DOCL
$165MNTD
$175APCF
$176APLF
$177ACCF
$178ACPF
$180APCP
$181APLP
$182ACCP
$183ACPP
$150HOLD is an optional job that you can run to receive HOLD Data only.
After you have submitted the jobs, press F3.
On the Execute Project panel, select an installation and configuration actions and then press Enter.
                                Execute Project
Command ===>

Project Name . . . INSTALL
Description . . . INSTALL
JCL Data Set . . . IAM.INSTALL.JCL

Select one of the following installation actions:
     1. Select Products, Solutions, or Infrastructure
     2. Set SMP/E Data Set High Level Qualifiers
     3. Set SMP/E Data Set Allocation Values
     4. Set Installation Job Values and FTP Options
     5. Generate and Execute Installation Batch Jobs

Select one of the following configuration actions:
1    1. Set Runtime Data Set High Level Qualifiers
     2. Set Runtime Data Set Allocation Values
     3. Set Selected Product or Component Values
     4. Set Configuration Job Values
     5. Generate and Execute Configuration Batch Jobs
On the INSTALL - Runtime & Other Data Sets panel, enter the runtime data sets by following the instructions displayed on the panel, and then press Enter.
                       INSTALL - Runtime & Other Data Sets
Command ===>                                                  Scroll ===> CSR

Enter the Data Set HLQs for runtime data sets. Press enter after typing a value
in the Quick Fill to set the other HLQs. Enter a '/' in the Quick Clear field
to clear the HLQs.

Quick Clear. . . . . . . . . . . .
Quick Fill . . . . . . . . . . . .

Runtime Data Set HLQ (SMP/E content)
   Product HLQ. . . . . . . . . . . IAM.INSTALL.IAM

Other Data Set HLQs (non-SMP/E content)
   Product non-VSAM . . . . . . . . IAM.INSTALL.NV
   Product VSAM . . . . . . . . . . IAM.INSTALL.V

Low Level Qualifiers
   Change Values. . . . . . . . 1 1. Use BMC* LLQs (recommended)
                                   2. Use BB/DB/IM/XX LLQs
                                   3. Customize the LLQs
Optional APF Load Library   Must be a PDSE.
   Existing Load Library . . .
On the INSTALL - Runtime & Other Data Sets panel, enter the runtime data set allocation values by following the instructions displayed on the panel, and then press Enter.
                 INSTALL - Runtime Data Set Allocation Values
Command ===>                                                  Scroll ===> CSR

Enter the Allocation Values for the runtime data sets. SMS values will be used
if specified. Press enter after entering a value in the Quick Fill to set the
other Allocation Values. Enter a '/' in the Quick Clear fields to clear the
values in that column.

Quick Clear . . . . . . . . . .
Quick Fill . . . . . . . . . .

Data Set Type                   STORCLAS MGMTCLAS DATACLAS UNIT      VOLSER
  Product Runtime Data Sets     DEVSMS                        SYSALLDA
  Product non-VSAM Data Sets    DEVSMS                        SYSALLDA
  Product VSAM Data Sets        DEVSMS                        SYSALLDA
  Product PDSE Data Sets        DEVSMS                        SYSALLDA
On the INSTALL - Configure Products or Components panel, select 4. Configure System Management products and press Enter.
                INSTALL - Configure Products or Components
Command ===>

Action availability is based on previously selected (or included) Products or
Components.

Select one of the following actions:
4    1. Configure BMC Infrastructure                        (complete)
     2. Configure Db2 products                              (not required)
     3. Configure IMS products                              (not required)
     4. Configure System Management products                (incomplete)
     5. Configure Mainframe Cost Optimization products      (not required)
     6. Configure products common to multiple product lines (not required)
     7. Apply Product Passwords                             (optional)
     8. Proceed to JCL Generation
If you do not have IAM/IAMPLEX installed, select 1. NONE and press Enter.
                    Install System Previous Release of Product
Command ===>

To upgrade a product or component, select the version and release that you
currently have installed. If you are not upgrading, specify 1 or N for
None. Press Enter to continue.

   BMC AMI Storage IAM/IAMPLEX . . . . . . 1 1 NONE
                                               2 11.0
On the INSTALL - Configure Products or Components panel, select 7. Apply Product Passwords and press Enter.
                  INSTALL - Configure Products or Components
Command ===>

Action availability is based on previously selected (or included) Products or
Components.

Select one of the following actions:
7    1. Configure BMC Infrastructure                        (complete)
      2. Configure Db2 products                              (not required)
      3. Configure IMS products                              (not required)
      4. Configure System Management products                (complete)
      5. Configure Mainframe Cost Optimization products      (not required)
      6. Configure products common to multiple product lines (not required)
      7. Apply Product Passwords                             (optional)
      8. Proceed to JCL Generation
Important
Make sure that you configure and start IAMMAIN after installation is complete. IAM and IAMPLEX are managed by BMC Security License Management. Contact BMC Support for new password keys. For more information, see Security-license-management-with-IAMMAIN.
On the Product Authorization panel, select your desired Product Authorization password method by entering one of the following numbers and pressing Enter.
Number
Authorization method
1
Copy previous passwords
2
Trial passwords
3
Permanent passwords
---------------------------- Product Authorization ----------------------------
COMMAND ===>                                                  SCROLL ===> CSR

Type the number of the authorization method for each product you are
installing. You can use different authorization methods for different
products. Press Enter to continue.

NOTE: A password is not needed for installation. You can enter the passwords
      from the Installation System main menu at a later time.

1 - COPY PREVIOUS PASSWORDS   2 - TRIAL PASSWORDS   3 - PERMANENT PASSWORDS

  Sel    Product                                     Version
   2     BMC AMI Storage IAM 11.0.00
         BMC AMI Storage IAMPLEX 11.0.00
Depending on what authorization method you have selected, one of the below screens appears next.
Example of Copy Previous Passwords
                   Install System Retain Product Authorization
Command ===>

You may retain your product authorization from the previously installed
products by copying the authorization modules into your new load/password
library.

Are the product authorization modules in one load/password library?. . N (Y/N)
Enter load/password library name

If not, provide the individual load/password libraries from which to copy the
product authorization modules. To make changes, type over the values shown.
Press Enter to continue.

    /=Select to retain
S Product                Auth              Load/Password Library Name
- -------------------- -------- ----------------------------------------------
/ BMC AMI Storage IAM   QRBTBL3P

Example of Trail Passwords
                     Install System Product Trial Authorization
Command ===>

The trial products are listed below. Type the trial passwords as shipped in
the package with the trial tape. Press Enter to continue.

Sel   BMC Product                             Trial/Bypass password
---   ------------------------------           -------------------
  /    BMC AMI Storage IAM                       XXX XXX XXX XXX

Example of Permanent Passwords
                 Install System Permanent Password Authorization
Command ===>

To execute a licensed product, type in the password and CPU information.

Select a single CPUID-TYPE for all products selected. . . . . . N (Y/N)
   CPUID-TYPE. . . .

Provide the permanent password supplied by BMC Software and the CPUID-Type
that the product will be executing on. To make changes, type over the values
shown. Press Enter to continue.

Sel Product                         Permanent Password      CPUID-TYPE
--- ------------------------------ --------------------   ------------
  /   BMC AMI Storage IAM              XXX XXX XXX XXX     XXXXX XXXX
After selecting the preferred password authorization, press Enter.
On the INSTALL - Configure Products or Components panel, select option 8. Proceed to JCL Generation and press Enter.
                  INSTALL - Configure Products or Components
Command ===>

Action availability is based on previously selected (or included) Products or
Components.

Select one of the following actions:
8    1. Configure BMC Infrastructure                        (complete)
      2. Configure Db2 products                              (not required)
      3. Configure IMS products                              (not required)
      4. Configure System Management products                (not required)
      5. Configure Mainframe Cost Optimization products      (not required)
      6. Configure products common to multiple product lines (not required)
      7. Apply Product Passwords                             (optional)
      8. Proceed to JCL Generation
On the INSTALL - Generated Job Values panel, enter the job card information, and then press Enter.
                      INSTALL - Generated Job Values
Command ===>                                                  Scroll ===> CSR

Enter the Generated Job Values for the configuration jobs.

Job Card Template
  //XXXXXXXX JOB (XXXX),'XXX',REGION=0M,
  //             CLASS=A,MSGCLASS=X,
  //             NOTIFY=&SYSUID TYPRUN=HOLD
  //*

Job Name Options
  Match generated member names . . . . . Y (Y=Yes, N=No) (Both options cannot
  Suffixed with member name number . . . N (Y=Yes, N=No) contain 'Y')
On the Configuration JCL Generation panel, select Generate JCL into IAM.INSTALL.JCL, and then press Enter.
                         Configuration JCL Generation    Project INSTALL saved
Command ===>

Select an option. Press Enter to continue or F12 to go back.

  S Generate JCL into IAM.INSTALL.JCL
    Skip generation process and display next panel





    Member   Status     Function
    $200ALOC            Data Set Allocation Desc
    $205RTEC            Create Runtime Libraries
    $206RTEC            Update Runtime Libraries
    $225ALOC            Allocate Additional Data Sets
    $250PSWD            Process Product Auth Modules
    $260MAPF            Create list of APF Data Sets
    $500COMN            Common Configuration Documenta
    $545COPY            Copy Functional Components
    RBACKOUT            Remove Runtime Libraries
    CBACKOUT            Remove Configuration Libs
Review the JCL generated on the Configuration JCL Execution Review panel, and then press Enter.
                    Configuration JCL Execution Review
Command ===>

Several jobs were generated into the following library:
   IAM.INSTALL.JCL

Review and submit jobs whose names start with $2 through $9 in the sequence
implied by the 2nd, 3rd and 4th characters of the member name. Base on your
particular install, you may not have jobs with all of the numbers from $2
through $9. Do not skip any of the jobs because they are generally
dependent on jobs earlier in the sequence. The jobs should complete without
abends or return codes greater than 4 unless otherwise documented in the job.

The exceptions are the #D9 jobs. They are also located in your JCL
library. If generated, these jobs should only be submitted when
you want to remove the installed product(s) libraries and
structures from your environment.

If any configuration steps remain, a $CJCKLST member is created containing
documentation which describes these remaining steps.


Press Enter to display an Edit member list of the $# generated jobs.
Important
You must follow the following job sequence:
$205RTEC
$206RTEC
$225ALOC
$250PSWD
$260MAPF
$545COPY
SMP/E environment for IAM has now been successfully created. You can access it through IAM.INSTALL.**.
Tip
IAMLINK contains IAM modules and BMCLINK contains security modules. To make sure that IAM functions smoothly, copy both IAMLINK and BMCLINK to LINKLIST which should be APF authorized. If you are using IAMLINK and BMCLINK directly then both need to be APF authorized as well.

Number	Authorization method
1	Copy previous passwords
2	Trial passwords
3	Permanent passwords

Installing IAM/IAMPLEX

On this page