FDR/UPSTREAM Started Task messages

UST002E*

OPEN clusterName CLUSTER FAILED COMP=rrrr CODE=cccc -- TERMINATING

Explanation: The FDRPAS for TCP/IP Main task was unable to open the indicated clusterName, either “CATALOG” or “FILE-INFO”. FDRPAS for TCP/IP terminates. rrrr is the return code in R15 after the open, and cccc is the ACBERFLG error code.

User Response: Verify your JCL specification for the “USTCATLG” or “USTFILEI” DD statement. Refer to the IBM VSAM Macro Reference or Macro Instructions for Data Sets manual (depending on the level of your operating system) to understand the OPEN error codes reported.

UST004E

TCP/IP ERROR REQUEST=xx COMP=ccccc reason

Explanation: A TCP/IP error during processing xx is an internal UPSTREAM request code. ccccc is the TCP/IP completion code from register 15 in decimal, and reason is a brief explanation of the error. Common error codes include:

User Response: Determine the cause, correct it, and repeat the operation (or restart UPSTREAM for FDRPAS).

UST005

function COMPLETED SUCCESSFULLY

Explanation: A management function requested from FDRPAS has completed successfully. function may be UPDATE OF PROFILE, REFRESH REQUEST, or LOGIN REQUEST.

User Response: No action is required.

UST005E

function COMPLETED WITH ERRORS - REASON=reason

Explanation: A management function from FDRPAS has completed abnormally. reason, if present, explains the error.

User Response: Verify your JCL specification for the “USTCONFG” DD statement. Review the most recent Configurator output for possible errors which may have made the file unusable.

UST006E

OPEN CONFIGURATION-FILE FAILED -- TERMINATING

Explanation: The UPSTREAM for FDRPAS main task, “USTMAIN”, was unable to open the Configuration File, “USTCONFG” DD statement. The UPSTREAM for FDRPAS started task terminates.

User Response: Determine the cause, correct it, and repeat the request. If necessary, contact BMC Support for assistance.

UST007W

OPEN FOR VTAM ACB BYPASSED

Explanation: The VTAM ACB was not opened because you specified APPLID=NONE in the UPSTREAM for FDRPAS configuration. Only TCP/IP connections are supported and note that mainframe-initiated operations via USTBATCH are not possible.

User Response: None, if this is as desired. Otherwise, reconfigure the UPSTREAM for FDRPAS MAIN options to specify a valid ACBNAME.

UST007W

OPEN FOR TCP/IP OR TCPACCESS BYPASSED

Explanation: The TCP/IP connection was not established because you specified TCPIP=NONE in the UPSTREAM for FDRPAS MAIN options configuration, or because the required TCP/IP interface module was not found (probably because TCP/IP is not installed on your system). Only VTAM APPC connections are supported.

User Response: None, if this is as desired. Otherwise, reconfigure the UPSTREAM for FDRPAS MAIN options to specify a valid TCP/IP Address space name (TCPNAME MAIN options parameter).

UST008

UPSTREAM STOP ACCEPTED -- SHUTDOWN IN PROGRESS

Explanation: A “P USTPAS” console command has been entered, requesting an orderly shutdown of the UPSTREAM for FDRPAS stated task.

User Response: No action is required.

UST010E

UNABLE TO ENQUEUE CONTROL FILE

Explanation: The UPSTREAM for FDRPAS online task detected that a UPSTREAM for FDRPAS utility function that updates the UPSTREAM for FDRPAS repository files is running. The two cannot execute together.

User Response: Wait until the utility job terminates, then start the online task again.

UST012E

UPSTREAM COMMAND NOT RECOGNIZED - command

Explanation: A command issued from the system console to UPSTREAM for FDRPAS was not STOP(P) or MODIFY(F). The command received is shown.

User Response: For valid commands for UPSTREAM for FDRPAS, see FDR/UPSTREAM Operation section in the FDRPAS for TCP/IP User Guide.

UST012E

MODIFY REQUEST NOT RECOGNIZED REQ: request

Explanation: A z/OS MODIFY(F) command issued from the system console was not recognized by UPSTREAM for FDRPAS. The invalid request is shown.

User Response: Recall the command and check the spelling and syntax. For valid commands for UPSTREAM for FDRPAS, see FDR/UPSTREAM Operation section in the FDRPAS for TCP/IP User Guide.

UST013*

(PART OF STATUS DISPLAY GROUP)

Explanation: This message is issued as part of a message group when a “STATUS” inquiry request is issued from the system console.

User Response: No action is required.

UST014*

(PART OF STATUS DISPLAY GROUP)

Explanation: This message is issued as part of a message group when a “STATUS” inquiry request is issued from the system console.

User Response: No action is required.

UST015*

(PART OF STATUS DISPLAY GROUP)

Explanation: This message is issued as part of a message group when a “STATUS” inquiry request is issued from the system console.

User Response: No action is required.

UST016*

NO TASKS CURRENTLY ACTIVE Vn.n.n

Explanation: This message is issued as part of a message group when a “STATUS” inquiry request is issued from the system console.

User Response: No action is required.

UST018E

START CONVERSATION RECEIVE FAILED

Explanation: The UPSTREAM for FDRPAS sub-task received an error indication while trying to start a conversation with FDRPAS.

User Response: Communication error codes are reported in a following message. Consult TCP/IP or IBM VTAM manuals to interpret the error, or contact BMC Support for assistance.

UST019E

INITIAL RECEIVE NOT START-CONVERSATION

Explanation: The UPSTREAM for FDRPAS sub-task received an unexpected data type during its conversation initialization.

User Response: This is an internal error. Retain the error log and contact BMC Support for assistance.

UST020E

UST022E

RECEIVED STRUCTURE NOT RECOGNIZED

Explanation: The UPSTREAM for FDRPAS sub-task received a data or control structure it did not recognize.

User Response: This is an internal error. Retain the error log and contact BMC Support for assistance.

UST025E

RECEIVE ERROR

Explanation: The UPSTREAM for FDRPAS received a communication error indication while receiving data or control information from FDRPAS.

User Response: Communication error codes are reported in a following message. Consult TCP/IP or IBM VTAM manuals to interpret the error, or contact BMC Support for assistance.

UST027E

RECEIVED DATA xxxxxxxx UNRECOGNIZED -- EXPECTED FILE-DATA

Explanation: The UPSTREAM for FDRPAS SWAP process received an unexpected data or control structure.

User Response: This is an internal error. Retain the error log and contact BMC Support for assistance.

UST028E

UNEXPECTED DEALLOCATE RECEIVED

Explanation: The UPSTREAM for FDRPAS SWAP process received an unexpected APPC DEALLOCATECONVERSATION request. This is most likely the result of an error having occurred on FDRPAS.

User Response: Review the FDRPAS log file for the error.

UST031E

REQUESTED DATA BLOCK SIZE EXCEEDS 32760 BYTES

Explanation: The communications performance test (M/F send) requested by FDRPAS has found that the requested block size for the test transmission exceeded 32760 bytes.

User Response: Reissue the request from FDRPAS specifying a valid test block size.

UST031E

COMMUNICATION RECORD ERROR OR FDRPAS NOT SUPPORTED

Explanation: This distribution of UPSTREAM for FDRPAS does not support the FDRPAS functionality or an error was encountered in the handshake with the remote connection.

User Response: Verify that you are licensed for FDRPAS and using the supplied distribution or contact BMC Support for assistance.

UST033E

APPC ERROR ON SEND OF DATA BLOCK

Explanation: The communications performance test (M/F send) requested by FDRPAS has received a communication error indication after issuing a SEND-DATA request.

User Response: Communication error codes are reported in a following message. Consult TCP/IP or IBM VTAM manuals to interpret the error, or contact BMC Support for assistance. Retry the communications performance test.

UST035

UPSTREAM Vn.n.n INITIALIZATION COMPLETE - CONFIG=member APPLID=applid SECLVL=n

Explanation: This is an informational message only. It is issued by the UPSTREAM for FDRPAS main task when its initialization process has completed. If shows the configuration member name used (if the configuration data set is a PDS), the VTAM application ID used, and the SECLVL in effect.

User Response: No action is required.

UST036E

CONFIGURATION FILE FORMAT ERROR -- TERMINATING

Explanation: During loading the Configuration Table, the UPSTREAM for FDRPAS main task found the file contained an error. UPSTREAM for FDRPAS terminates with a non-zero return code.

User Response: Review the most recent output from the UPSTREAM for FDRPAS Configurator program for errors. Correct them, rerun the Configurator, and restart the task.

UST037E

ATTACH FOR SUBTASK FAILED -- SESSION DENIED LU=luName

Explanation: The UPSTREAM for FDRPAS main task was unable to attach a processing sub-task for the indicated logical unit. This may be a result of a storage shortage.

User Response: Try increasing the REGION size for the UPSTREAM for FDRPAS task, if the problem is memory related and retry the operation.

UST039E

PROFILE NAME IS INVALID

Explanation: The profile name received from FDRPAS had a length greater than 8.

User Response: Insure that the specified profile name is 8 characters or less. Profile names are limited to 1 - 8 alpha, numeric, and national characters. If you are unable to determine the cause of the error, retain the error log and contact BMC Support for assistance.

UST040E

LU=luName USERID IS MISSING OR INVALID

Explanation: The userid received from FDRPAS had a length of 0 or greater than 8.

User Response: This error message may be issued if you have specified a non-zero security level parameter (SECLVL=) in the UPSTREAM for FDRPAS configuration and the request being processed specified no USERID value. Otherwise, this is internal error; Retain the error log and contact BMC Support for assistance.

UST041E

LU=luName PASSWORD IS MISSING OR INVALID

Explanation: The password received from FDRPAS had a length of 0 or greater than 8.

User Response: This error message may be issued if you have specified a non-zero security level parameter (SECLVL=) in the UPSTREAM for FDRPAS configuration and no password was specified. Otherwise, this is internal error; Retain the error log and contact BMC Support for assistance.

UST042E

RECEIVE-DATA ERROR

Explanation: The UPSTREAM for FDRPAS sub-task received a communication error indication during a RECEIVE-DATA request.

User Response: Communication error codes are reported in a following message. Consult TCP/IP or IBM VTAM manuals to interpret the error, or contact BMC Support for assistance.

UST043E

UNEXPECTED DEALLOCATE RECEIVED

Explanation: The UPSTREAM for FDRPAS sub-task received an unexpected DEALLOCATE-CONVERSATION indication. This is most likely the result of an error condition on FDRPAS.

User Response: Review the error log on the FDRPAS to resolve the problem.

UST048E

MAIN SUBEND UNABLE TO LOCATE ATB FOR TCB=tcbAddress

Explanation: This is an internal error.

User Response: Retain all error information and contact BMC Support for assistance.

UST049E

SEND CONFIRMED-RESPONSE FAILED

Explanation: The UPSTREAM for FDRPAS SWAP process received a communication error indication attempting to send an CONFIRMED response.

User Response: Communication error codes are reported in a following message. Consult TCP/IP or IBM VTAM manuals to interpret the error, or contact BMC Support for assistance.

UST050

event information reported from FDRPAS

Explanation: This message contains text sent from FDRPAS. It is usually used to report an error condition at FDRPAS.

User Response: Review the message and consult the FDR/UPSTREAM Client Guide to interpret the error, or contact BMC Support for assistance.

UST051E

general VSAM error diagnostic information

Explanation: This message is logged by the VSAM error diagnosis routine. It contains specific error codes from the VSAM “RPL” control block. If possible, the message also contains a brief text description of the error. This message is accompanied by others, indicating the location of the error.

User Response: If necessary, refer to the IBM VSAM Macro Reference or Macro Instructions for Data Sets manual (depending on the level of your operating system) to understand the error codes reported. Correct the error or contact BMC Support for assistance.

UST052E

COMM ERROR ON RECEIVE DATA REQUEST

Explanation: The communications performance test (PC send) requested by FDRPAS has received an error indication after issuing a RECEIVE request.

User Response: Communication error codes are reported in a following message. Consult TCP/IP or IBM VTAM manuals to interpret the error, or contact BMC Support for assistance.

UST054E

SEND OF PROFILE-DESCRIPTION FAILED - reason

Explanation: FDRPAS requested display or update of a profile definition, but the request failed for the reason given.

User Response: If possible, correct the error and resubmit the request. If necessary, contact BMC Support for assistance.

UST056W

NO CATALOG RECORD FOUND FOR THIS PROFILE NAME

Explanation: This message is issued by the UPSTREAM for FDRPAS SWAP process. While searching for a Catalog Version record for the supplied FDRPAS Profile Name, no record was found. The specified Profile Name has no versions currently recorded. There may have been no prior SWAP done specifying this name.

User Response: Review the available SWAPs and select the proper one. If you need assistance, contact BMC Support.

UST061E

DEALLOCATE-CONFIRM REQUEST FAILED

Explanation: The UPSTREAM for FDRPAS Restore logic attempted to normally terminate the conversation by issuing an DEALLOCATE-CONFIRM request but got a communication error indication.

User Response: Communication error codes are reported in a following message. Consult TCP/IP or IBM VTAM manuals to interpret the error, or contact BMC Support for assistance.

UST062E

UNEXPECTED DEALLOCATE RECEIVED FROM WORKSTATION

Explanation: The UPSTREAM for FDRPAS restore logic received an unexpected DEALLOCATECONVERSATION request from FDRPAS. This is most likely the result of an error condition having occurred on FDRPAS.

User Response: Review the FDRPAS error log to determine the reason the DEALLOCATE request was sent. Communication error codes are reported in a following message. Consult TCP/IP or IBM VTAM manuals to interpret the error, or contact BMC Support for assistance.

UST063E*

UNABLE TO LOAD CONFIG TABLE -- ENQ FAILED

Explanation: The UPSTREAM for FDRPAS main task was unable to acquire an exclusive ENQ in order to load the Configuration Table.

User Response: Ensure that you were not trying to start more than one copy of the UPSTREAM for FDRPAS main task. If not, this may be an internal error. Retain all error information and contact BMC Support for assistance.

UST064E*

CONFIGURATION TABLE LOAD FAILED - TERMINATING

Explanation: The UPSTREAM for FDRPAS main task was unable to load the Configuration Table, and is terminating as a result.

User Response: This is an internal error. Retain all error information and contact BMC Support for assistance.

UST073E

ATTNEXIT FOUND function IN PROGRESS -- REJECTED

Explanation: The requested conversation initiation was denied due to a UPSTREAM for FDRPAS having a status that prevents new FDRPAS functions from starting. If function is SHUTDOWN, then UPSTREAM for FDRPAS received a system console STOP request and is waiting for all currently active sub-tasks to terminate.

User Response: FDRPAS can retry the request after UPSTREAM for FDRPAS is restarted.

UST080

nnnnnnnnnnnn DATA-BLOCKS; mmmmmmmmmmm DATA-BYTES RECEIVED

Explanation: This is the last of a multi-message group. This message is preceded by messages UST078 and UST079 containing the statistics for the function just ended. This message contains the total count of transmission data blocks and bytes send to or from FDRPAS.

User Response: No action is required.

UST086E

COMM RECEIVE REQUEST TIMEOUT -- function TERMINATED

Explanation: A function in progress is terminated after a period of 10 minutes if no data is received from FDRPAS.

User Response: Review the log on FDRPAS to determine the cause of the timeout.

UST097W

IMMEDIATE SHUTDOWN REQUESTED -- function TERMINATED

Explanation: The indicated function was in progress when UPSTREAM for FDRPAS received an immediate shutdown request from the System Operator. The function is terminated

User Response: No action is required.

UST099

PARM --> parmData

Explanation: If parameters were passed to UPSTREAM for FDRPAS via the PARM= JCL operand on the EXEC statement in the UPSTREAM for FDRPAS startup PROC, the parameters are shown here.

User Response: No action is required.

UST099E

PARM KEYWORD UNKNOWN [INVALID NUMERIC]

Explanation: One of the startup parameters or its specified value shown in the UST099 message is invalid.

UST100W

'QUIT' REQUESTED -- INITIATION ABORTED

Explanation: A F USTPAS,TERM or F USTPAS,QUIT console command was entered to request immediate termination of UPSTREAM for FDRPAS. FDRPAS was in the process of initiating a conversion; it is terminated.

User Response: No action is required.

UST106

UPSTREAM CUSTOMER NUMBER nnnnnnnn

Explanation: This message is informational only. It is issued by the UPSTREAM for FDRPAS main task during its initialization. If this is a UPSTREAM for FDRPAS trial, the text “TRIAL VERSION” will appear instead of a customer number.

User Response: No action is required.

UST107W*

nnnn DAYS TO UPSTREAM EXPIRATION

Explanation: This message is issued during main task initialization to indicate the UPSTREAM for FDRPAS product authorization time period is about to expire.

User Response: Contact BMC Support if you have any questions.

UST109E

AUTHORIZATION FAILED, CODE = nn

Explanation: During initialization, the UPSTREAM for FDRPAS main task found an authorization violation. The “CODE=nn” value indicates the type of authorization failure.

User Response: Retain the error log and contact BMC Support for assistance.

UST111E*

UPSTREAM USE HAS EXPIRED, CONTACT BMC SUPPORT FOR ASSISTANCE

Explanation: This message is issued by the UPSTREAM for FDRPAS main task to indicate that the timed use of the product has expired. UPSTREAM for FDRPAS will not start.

User Response: Contact BMC Support for assistance.

UST117E

function FAILED

Explanation: A communications failure occurred.

User Response: Refer to subsequent messages for additional information.

UST119E*

APF AUTHORIZATION CHECK FAILED -- CANNOT CONTINUE

Explanation: During initialization, an UPSTREAM for FDRPAS component has determined that it is not running as an APF authorized task. UPSTREAM for FDRPAS terminates.

User Response: Verify that the load library from which UPSTREAM for FDRPAS is being run is APF authorized in the z/OS system.

UST147E

SEND COMMUNICATION STRUCTURE FAILED

Explanation: An error occurred sending the communication record handshake to the FDRPAS partner.

User Response: Communication error codes are reported in a following message. Consult TCP/IP or IBM VTAM manuals to interpret the error, or contact BMC Support for assistance.

UST165E

GOTEVENT RECEIVE ERROR

Explanation: The sequential tape restore process received a communication error indication while attempting to receive an “event” information record from the Client.

User Response: Communication error codes are reported in a following message. Consult TCP/IP or IBM VTAM manuals to interpret the error, or contact BMC Support for assistance.

UST173

function COMPLETED SUCCESSFULLY (LU=luName)

Explanation: This message is issued by all processes to show that the indicated function has completed successfully. This message may optionally be written to the system log (SYSLOG) if the “WTOCOMP” option was specified in the UPSTREAM for FDRPAS “MAIN” record.

User Response: No action is required.

UST174W

function COMPLETED WITH ERRORS (LU=luName)

Explanation: This message is issued by all processes to show that the indicated function has completed with some potential errors. This message may optionally be written to the system log (SYSLOG) if the “WTOCOMP” option was specified in the UPSTREAM for FDRPAS “MAIN” record.

User Response: No action is required.

UST175E

function FAILED reason (LU=luName)

Explanation: This message is issued by all processes to indicate the indicated function has failed. This message may optionally be written to the system log (SYSLOG) if the “WTOCOMP” option was specified in the UPSTREAM for FDRPAS “MAIN” record. “reason” may be “WAS SUSPENDED” if FDRPAS requested suspension or “COMMUNICATIONS” if the failure was due to a communications error; otherwise it is blank.

User Response: Review any preceding messages in the UPSTREAM for FDRPAS log file, the z/OS system log (SYSLOG), and the UPSTREAM for FDRPAS log file for the causes of the process failure.

UST180E

SUBTASK PROCESS FAILED profileName luName COMP=Snnn Unnn

Explanation: This message is issued by the UPSTREAM for FDRPAS main task to indicate that a sub-task process has abnormally terminated; Snnn is the z/OS System sub-task completion or abend code if applicable, Unnn is the User completion code. This message may optionally be written to the system log (SYSLOG) if the “WTOCOMP” option was specified in the UPSTREAM for FDRPAS “MAIN” record.

User Response: Review the UPSTREAM for FDRPAS JES joblog to determine the cause of the sub-task failure.

UST216W

IMMEDIATE SHUTDOWN REQUESTED - function TERMINATED

Explanation: The indicated function was in progress when UPSTREAM for FDRPAS received an immediate shutdown request from the System Operator. The function is terminated.

User Response: No action is required.

UST224

profileName ssssss.sss CPU SECONDs USED IN process

Explanation: The indicated number of CPU seconds were used in processing the just-completed request for the indicated Profile name.

User Response: No action is required.

UST228

CONFIGURATION TABLE [RE]LOADED

Explanation: This informational message confirms that the UPSTREAM for FDRPAS configuration table has been successfully LOADED during online initialization or successfully RELOADED in response to a F USTPAS,REFRESH console command.

User Response: No action is required.

UST229

REQUEST USING “profName” CONFIGURATION ENTRY

Explanation: The profile name entered by FDRPAS has no entry in the UPSTREAM for FDRPAS configuration, but there was either a prefix profile defined with WSPREF=prefix that matched the beginning of the entered profile name, or a profile defined with the special name “GLOBAL”. The characteristics of this profile were used for this request.

User Response: No action is required.

UST240W*

ACTIVE TASK FOUND -REPLY W(AIT)-FOR TASK TERM,TERM ID=NNNN, C(ANCEL),S(TATUS) OR I(GNORE)

Explanation: The operator issued a console CANCEL command for the UPSTREAM for FDRPAS online task, but UPSTREAM for FDRPAS CANCEL protection detected that there was an active SWAP sub-tasks. This message is preceded by the UST013*, UST014*, and UST015* messages showing the active sub-tasks.

User Response: The operator may reply:

 All of the replies (except TERM) can be abbreviated by the first character.

UST240W*

ACTIVE TASK FOUND - function AWAITING TASK TERMINATION

Explanation: The operator requested termination of UPSTREAM for FDRPAS via a STOP (P) console command (function=SHUTDOWN) or via a CANCEL (C) console command (function=CANCEL) but there was an active SWAP task in progress. For CANCEL, this message is issued if the operator replies “WAIT” to the preceding UST240W* message.

User Response: UPSTREAM for FDRPAS terminates when all sub-tasks have completed.

UST241*

function NOW ACTIVE

Explanation: A trace or utility function has been started. See additional messages for the output and status of the requested function.

User Response: No action is required.

UST241*

function COMPLETED RC=nn

Explanation: A trace or utility function has completed with completion code nn.

User Response: No action is required.

UST242*

QUIT ACCEPTED -- SHUTDOWN IN PROGRESS

Explanation: A console command has been entered requesting immediate shutdown of UPSTREAM for FDRPAS. For details on shutting down UPSTREAM, see Stop the FDRPAS for TCP/IP z/OS Started Task section in the FDRPAS for TCP/IP User Guide.

User Response: If there are active SWAP tasks, they are signaled to interrupt their processing. UPSTREAM for FDRPAS terminates when all sub-tasks have terminated.

UST243*

QUIT ACCEPTED -- LU=luName TERMINATED

Explanation: A console command has been entered requesting immediate termination of the UPSTREAM for FDRPAS session with the specified logical unit. The termination was successful.

User Response: No action is required.

UST244E*

QUIT REJECTED -- LU=luName INVALID OR NOT ACTIVE

Explanation: A console command has been entered requesting immediate termination of the UPSTREAM for FDRPAS session with the specified logical unit. The luName is either not a valid name or is not currently in session with UPSTREAM for FDRPAS.

User Response: Determine the proper value to specify for LUNAME and resubmit the request.

UST248

luName profileName function PROCESS DETACHED TASKID=nnnn

Explanation: The SWAP sub-task for the indicated profile name and logical unit has been terminated. The internal task identifier for this process was nnnn.

User Response: No action is required.

UST249*

MODIFY COMMAND ACCEPTED - REQUEST: parms

Explanation: An F USTPAS command entered on the system console has been completely processed by UPSTREAM for FDRPAS.

User Response: No action is required.

UST253E*

MAXTASKS EXCEEDED - LU=luName REJECTED

Explanation: The UPSTREAM for FDRPAS received a request to initiate a new conversation, but the maximum number of active UPSTREAM for FDRPAS tasks specified in the UPSTREAM for FDRPAS configuration has been reached. This conversion request is rejected.

User Response: Retry the request at a later time, after some other UPSTREAM for FDRPAS tasks have terminated.

UST290W

HISTORY RECORD BYPASSED reason

Explanation: An UPSTREAM for FDRPAS history record was not recorded in the UPSTREAM for FDRPAS catalog file for the reason indicated, which may be:

• CATALOG NOT OPEN – probably because it is being reorganized
• DUE TO CATALOG ERROR COMP=xxxxxxxx – the comp is the VSAM RPL feedback word

User Response: The operation completed, only the history record was lost. If multiple catalog errors occur, you may need to reorganize the catalog file. If necessary, contact BMC Support for assistance.