SMF 90 fields
Name | Tag | Description |
|---|---|---|
SMF9014D | MSufix | Array Of MPF Suffixes |
SMF9025N | ServiceDef | Service definition name |
SMF9025S | NewSysname | System name installed |
SMF9025T | TimeStmp | Time and date of install(STCK) |
SMF9025U | InstallUserID | User ID of the service level administrator who installed the service definition |
SMF9026G | LogStream | Original log strean name |
SMF9026H | NewLogname | New Logstream name |
SMF9026M | Medium | Original logrec recording medium |
SMF9026N | NewDSN | New LOGREC name |
SMF9026R | NewMedium | New Logrec medium |
SMF90APM | Parm | Accounting Parameter |
SMF90APN | Mem | SET APPC Member Names |
SMF90APT | TimeStmp | Date and time |
SMF90ASN | Subsys | Subsystem Name |
SMF90BFL | BufWarn | BUFUSEWARN value (dd) |
SMF90BFM | Maxbuff | BUFSIZMAX value (ddddu) |
SMF90CAT | Cat | Constant ‘System_Status’ |
SMF90CGN | Mem | Changed Member Names |
SMF90CGT | TimeStmp | Date and time |
SMF90CMP | Count | Array Count |
SMF90DAN | NewMem | Name of the new parmlib member |
SMF90DAO | Mem | Name of the old parmlib member |
SMF90DAT | TimeStmp | Time and date of change |
SMF90DSN | DSN | SMF Data set name |
SMF90DTL | Detail | When Bit set Detail Recording on |
SMF90ESWT | SWT | SWT as entered in SMFPRMxx |
SMF90ETWT | TWT | TWT as entered in SMFPRMxx |
SMF90EXN | Exits | Names of the active exits for this subsystem Each sequentially listed exit name is 8-characters long. Up to 15 exits can be specified. |
SMF90ID | IPLDate | Date of the IPL, in the form 0cyydddF |
SMF90IDN | ServiceNam | Service definition name |
SMF90IDS | Sysname | Name of the system from which the service definition was installed |
SMF90IDU | InstallUserID | User ID of service level administrator that installed this service definition |
SMF90IIT | TimeStmp | Time from midnight 100th Sec |
SMF90IPU | ActivatorUserID | User ID of the system operator or service level administrator who activated this service policy A service policy can be activated by the VARY WLM command, or by an option in the WLM ISPF administrative application. |
SMF90IT | IPLtime | Date and time of IPL |
SMF90JWT | JWTvalue | JWT value in mmss Format |
SMF90LOG | DSN | Log Rec dsname |
SMF90MAX | MaxDorm | MAXDORM mmss Char Format |
SMF90MCN | NewCmd | Reserved Was name of new parmlib Members Commands |
SMF90NSP | NameServiceP | Name of service policy activated |
SMF90OPN | Newparm | New OPT parmlib member |
SMF90OPO | Oldparm | Old OPT parmlib member |
SMF90PFN | NewMem | New Parmlib Member |
SMF90PFO | Mem | Old Parmlib Member |
SMF90PN7 | Policy | Name of policy being processed (blank if no policy specified on start, or if no policy is active on stop) |
SMF90PNM | Prod | Product name SMF, SRM, SUP, etc |
SMF90PS7 | Sysname | System Name |
SMF90REL | OPsysRel | Operating system release number |
SMF90RVN | Ver | Record version number |
SMF90SBU | Smfop3 | SMF SyID Syntax used |
SMF90SCN | Mem | SET ASCH Member Names |
SMF90SCN_Suffixes | Suffixlst | Array of 2-byte suffixes of specified AUTORxx parmlib members |
SMF90SCT | TimeStmp | Date and time |
SMF90SGN | Mem | Array of two-byte suffixes of specified parmlib members |
SMF90SGS | Sysname | System that issued the command |
SMF90SGT | TimeStmp | Time that the command was entered |
SMF90SHC | Count | Member Count |
SMF90SHN | Mem | SCH Member Names |
SMF90SHT | TimeStmp | Date and time |
SMF90SNA | Sysname | System Name |
SMF90SND | NewDSN | Subtype 6: This field is the new recording data set |
SMF90SOD | DSN | Subtype 6: This field is the old recording data set |
SMF90STA | Status | STATUS hhmmss Format |
SMF90STP | SubT | Record subtype expressed as an integer |
SMF90STPD | SubT | Record subtype expressed as a textual description: 2 SET DATE 4 Reserved 5 SET SMF 6 SWITCH SMF 7 HALT EOD 8 IPL PROMPT 9 IPL SMF 10 IPL SRM 11 SET OPT 12 Reserved 13 SETSMF 14 SET MPF 15 SET SMF (to restart SMF) 16 SET DAE 17 SET PFK 18 SET GRSRNL 19 SET APPC 20 SET ASCH 21 SET SCH 22 SET CNGRP 23 IPL WLM 24 VARY WLM 25 MODIFY WLM 26 IPL LOGREC 27 SETXCF START (to enable automatic restart management) 28 SETXCF STOP (to disable automatic restart management) 29 SET PROG (for LNKLST set activation) 30 RESET 31 SET PROG (for LPALST activation) 32 WLM policy change 33 SET AUTOR 34 Processor capacity change 35 SETLOAD xx,IEASYM 36 SET CON 37 Dynamic APF |
SMF90SUB | Acct%02u | Accounting parameters |
SMF90SVL | Interval | Length of Interval between Checkpoints |
SMF90SW2 | Smfop2 | SMF Switches |
SMF90SWn | Opts | SMF Switches |
SMF90SWT | Smfop1 | SMF Switches Type |
SMF90SYI | Sysid | System identification |
SMF90SYS | Types |
|
SMF90T29CONSID | ConID | Console ID |
SMF90T29LNKLSTNAME | Linkname | Name of the LNKLST set activated |
SMF90T29LNKLSTSEQ# | Seq# | Sequence number for the LNKLST set |
SMF90T29TIMESTAMP | TimeStmp | Time and date (STCK) of the LNKLST set activation |
SMF90T30_ENCLAVEOWN | EnclOwner | Enclave Name of the address space that owns it |
SMF90T30_ENTRY_TIME | TimeStmp | Program entry time, in hundredths of a second since midnight |
SMF90T30_FLAGS | Flag | Bit Meaning when set 0 QUIESCE operand used 1 RESUME operand used 2 SRVCLASS operand used 3 PGN operand used 4 The enclave service class was reset 5 The enclave was quiesced 6 The enclave was resumed 7 Reserved |
SMF90T30_FLAGS2 | Flag2 | Additional characteristics, as follows: Bit Meaning when set 0 Original independent enclave 1 7 Reserved |
SMF90T30_JOBID | JobID | JES JobID of the reset job |
SMF90T30_JOBNAME | JobNm | Name of the job that was reset |
SMF90T30_NEWSRV | ServClsNew | Service class name associated with the job or enclave after reset |
SMF90T30_OLDSRV | ServCls | Service class name associated with the job or enclave |
SMF90T30_OPERATOR | OpID | Operator ID that issued RESET command |
SMF90T31ADDORDELETE | Type | 0 this record is the result of an ADD to LPA; 1 this record is the result of a DELETE from LPA |
SMF90T31CONSID | ConID | ConsoleID |
SMF90T31MODLIST | ModNm | Modules Inclued |
SMF90T31NUMMODS | Num | Number of modules in this record |
SMF90T31REQUESTOR | Requester | The requestor ID |
SMF90T31TIMESTAMP | TimeStmp | Time value (from STCK) of the activation |
SMF90T33_Timestamp | TimeStmp | Time of auto-reply policy change |
SMF90T34_Capacity_C | TimeStmp | Time when last changed |
SMF90T34_CapacityA | CapAdjust | Capacity adjustment |
SMF90T34_Flags | Flags | Error flags |
SMF90T34_RCTPCPUA | CPUAdjust | Physical CPU adjustment factor |
SMF90T34_RCTPCPUAN | CPUNorm | CPU time to equivalent service normal |
SMF90T34_RCTPCPUAS | ScalingF | Scaling Factor |
SMF90T34_RMCTADJN_No | RMCNormal | Error flags |
SMF90T34_RQSVSUS | CurrentSU | Current service unit factor (SU factor) from RQSVSUS |
SMF90T35_ConsID | ConID | Console ID of issuer |
SMF90T35_IeasymStat | Suffixes | List of suffixes |
SMF90T35_LOADxxName | Load_name | LOADxx member |
SMF90T35_Timestamp | TimeStmp | Time of SETLOAD |
SMF90T36_MemberName | Mem | Console Suffix |
SMF90T36_Timestamp | TimeStmp | Time Console change |
SMF90T37ChKey | ChKey | Step Name |
SMF90T37ConsID | ConID | Console ID |
SMF90T37DSNAME | DSN | Data Set Name |
SMF90T37Flags | Flag | Bit Meaning when set 0 Update from SETPROG command 1 Update from SET PROG command 2 Update from CSVAPF macro |
SMF90T37Function | Func | Function indicator: Value Meaning 1 APF Add 2 APF Delete 4 APF Format (Dynamic) 6 APF Format (Static) |
SMF90T37Jobname | JobNm | Jobname or ASID |
SMF90T37ParmMemSuffx | Suffix | PROGxx |
SMF90T37TIMESTAMP | TimeStmp | Time of Update |
SMF90T37Volume | Vol | Vol Ser |
SMF90T39_Suffixes | SuffixL | SMFLIMXX LIM SUFFIXES |
SMF90T39_Timestamp | TimeStmp | Time of policy change |
SMF90TDI | TimeStmp | Time and Date STCK |
SMF90TMP | TimeStmp | Date and time of change |
SMF90TOP | TimeStmp | Time (in STCK format) of OPT change |
SMF90TPA | ActivateTime | Time and Date |
SMF90TPF | TimeStmp | Date and time |
SMF90WCH | Subsys%02u | Subsystems and their attributes |
SMF90WKN | Name | Name of Subsystem |
Related topic