Verifying the Linux data server installation script
After the Linux data server installation script is on the Linux System, verify the configuration parameters by viewing the mmldinst script with the 'less' shell command as follows:
[root@lnx01]# less /tmp/mmldinst
#!/bin/bash
#-------------------------------------------------------------------
# Configuration parameters for MAINVIEW for Linux Data Server
#-------------------------------------------------------------------
# DSNHILV : The MVS DSN hi-level qualifier to obtain
# <DSNHILV>.RPMS files. (Default=BMC.MVLNX)
# MVSHOST : The MVS host name to obtain RPMS files.
# MVSUSER : The MVS user name to obtain RPMS files.
# RTHOST : The MVS host name where the RTServer is running.
# RTPORT : The port number where the RTServer is listening.
# (Default=5101)
# DSUSER : The MML data server user name to run under.
# (Default=mmldusr)
# DCVEND : The data collecter vendor (B=BMC,V=Velocity)
# (Default=B)
#-------------------------------------------------------------------
DSNHILV=BMC.MVLNX
MVSHOST=MVS1
MVSUSER=MVSUSR1
RTHOST=MVS1
RTPORT=5101
DSUSER=mmldusr
DCVEND=b
#-------------------------------------------------------------------
# Do not change anything below this comment block.
#-------------------------------------------------------------------
#!/bin/bash
#-------------------------------------------------------------------
# Configuration parameters for MAINVIEW for Linux Data Server
#-------------------------------------------------------------------
# DSNHILV : The MVS DSN hi-level qualifier to obtain
# <DSNHILV>.RPMS files. (Default=BMC.MVLNX)
# MVSHOST : The MVS host name to obtain RPMS files.
# MVSUSER : The MVS user name to obtain RPMS files.
# RTHOST : The MVS host name where the RTServer is running.
# RTPORT : The port number where the RTServer is listening.
# (Default=5101)
# DSUSER : The MML data server user name to run under.
# (Default=mmldusr)
# DCVEND : The data collecter vendor (B=BMC,V=Velocity)
# (Default=B)
#-------------------------------------------------------------------
DSNHILV=BMC.MVLNX
MVSHOST=MVS1
MVSUSER=MVSUSR1
RTHOST=MVS1
RTPORT=5101
DSUSER=mmldusr
DCVEND=b
#-------------------------------------------------------------------
# Do not change anything below this comment block.
#-------------------------------------------------------------------
Use an editor (vi, emacs, and so on.) to make any changes. After you have verified the configuration parameters, type the following command as root user on the Linux system to install the data server:
/tmp/mmldinst -v
root@lnx01]# /tmp/mmldinst -v
mmldinst: FTP latest RPMS files from MVS ...
mmldinst: Enter TSO password for MVSUSR1 on MVS1,
mmldinst: or nothing to exit :
Connected to mvs1.bmc.com.
220-DC$FTSRV IBM FTP CS V1R7 at mvs1.BMC.COM, 21:31:43 on 2008-08-28.
220 Connection will close if idle for more than 30 minutes.
534 Server is not willing to accept security mechanism
504 Server does not understand the specified mechanism
KERBEROS_V4 rejected as an authentication type
Remote system type is MVS.
331 Send password please.
230 MVSUSR1 is logged on. Working directory is "BMC.MVLNX.".
200 Representation type is Image
250 The working directory "BMC.MVLNX.RPMS" is a partitioned data set
local: /tmp/bmcbgs.S390.tar.gz remote: BGSCS390
227 Entering Passive Mode (172,19,164,166,12,232)
125 Sending data set BMC.MVLNX.RPMS(BGSCS390)
250 Transfer completed successfully.
53720221 bytes received in 18 seconds (2.9e+03 Kbytes/s)
local: /tmp/bmcmml.S390.rpm remote: MMLDS390
227 Entering Passive Mode (172,19,164,166,13,2)
125 Sending data set BMC.MVLNX.RPMS(MMLDS390)
250 Transfer completed successfully.
6424992 bytes received in 3.4 seconds (1.8e+03 Kbytes/s)
200 Representation type is Ascii NonPrint
250 The working directory "BMC.MVLNX.BBSAMP" is a partitioned data set
local: /tmp/mmldinst.new remote: mmldinst
227 Entering Passive Mode (172,19,164,166,13,9)
125 Sending data set BMC.MVLNX.BBSAMP(MMLDINST) FIXrecfm 80
250 Transfer completed successfully.
18536 bytes received in 0.015 seconds (1.2e+03 Kbytes/s)
local: /tmp/mmldsrv.ini remote: mmldini
227 Entering Passive Mode (172,19,164,166,13,12)
125 Sending data set BMC.MVLNX.BBSAMP(MMLDINI) FIXrecfm 80
250 Transfer completed successfully.
75 bytes received in 0.0031 seconds (23 Kbytes/s)
local: /tmp/mmldtest remote: mmldtest
227 Entering Passive Mode (172,19,164,166,13,13)
125 Sending data set BMC.MVLNX.BBSAMP(MMLDTEST) FIXrecfm 80
250 Transfer completed successfully.
788 bytes received in 0.0029 seconds (2.6e+02 Kbytes/s)
250 The working directory "BMC.MVLNX.UBBSAMP" is a partitioned data set
local: /tmp/mmldsrv.ini remote: mmldini
227 Entering Passive Mode (172,19,164,166,13,14)
550 Request nonexistent member BMC.MVLNX.UBBSAMP(MMLDINI) to be sent.
local: /tmp/mmldtest remote: mmldtest
227 Entering Passive Mode (172,19,164,166,13,15)
550 Request nonexistent member BMC.MVLNX.UBBSAMP(MMLDTEST) to be sent.
221 Quit command received. Goodbye.
Installing MAINVIEW for Linux ...
mmldinst: running install of bgscollect (may take a few minutes) ...
mmldinst: install of bgscollect done.
mmldinst: installing /tmp/bmcmml.S390.rpm
Preparing... ########################################### [100%]
1:bmcmml ########################################### [100%]
MML Data Server set to run at runlevel '3'
mmldinst: issuing 'mmldsrv edit -h MVS1 -p 5101 -u mmldusr -b y'
mmldinst: issuing 'mmldsrv start'
Starting MAINVIEW for Linux ...
MAINVIEW for Linux started.
mmldinst: issuing 'mmldsrv stat'
mmldusr 18369 1.0 2.6 13040 6640 pts/0 S+ 16:34 0:00
/opt/bmc/mml/sbin/mmldsrv -if /opt/bmc/mml/mmldsrv.ini -ef
/var/bmc/mml/mmldsrv.log
mmldusr 18384 0.3 1.2 7580 3164 ? Ss 16:34 0:00 bgscollect -I
noInstance -B /usr/adm/best1_default
bgscollect 7.4.00 SuSE Linux 8.1 (s390, 32 Bit) 7.4.00.6027 Jul 4 2007
mmldinst: issuing 'cat /var/bmc/mml/mmldsrv.log'
08/28/08 16:34:10 001 284002 - mml0dcmn: main : MAINVIEW for Linux Data Server
program /opt/bmc/mml/sbin/mmldsrv is starting - version 1.4.00 fixlevel BPN1202
08/28/08 16:34:11 400 284017 - MMLCosServerConnectionManager::connect :
08/28/08 16:34:11 400 284017 - Connecting to RTServer on MVS1 port 5101
08/28/08 16:34:11 400 284017 - MMLCosServerConnectionManager::connect :
08/28/08 16:34:11 400 284017 - Connection successful
mmldinst: Install of MAINVIEW for Linux finished.
mmldinst: FTP latest RPMS files from MVS ...
mmldinst: Enter TSO password for MVSUSR1 on MVS1,
mmldinst: or nothing to exit :
Connected to mvs1.bmc.com.
220-DC$FTSRV IBM FTP CS V1R7 at mvs1.BMC.COM, 21:31:43 on 2008-08-28.
220 Connection will close if idle for more than 30 minutes.
534 Server is not willing to accept security mechanism
504 Server does not understand the specified mechanism
KERBEROS_V4 rejected as an authentication type
Remote system type is MVS.
331 Send password please.
230 MVSUSR1 is logged on. Working directory is "BMC.MVLNX.".
200 Representation type is Image
250 The working directory "BMC.MVLNX.RPMS" is a partitioned data set
local: /tmp/bmcbgs.S390.tar.gz remote: BGSCS390
227 Entering Passive Mode (172,19,164,166,12,232)
125 Sending data set BMC.MVLNX.RPMS(BGSCS390)
250 Transfer completed successfully.
53720221 bytes received in 18 seconds (2.9e+03 Kbytes/s)
local: /tmp/bmcmml.S390.rpm remote: MMLDS390
227 Entering Passive Mode (172,19,164,166,13,2)
125 Sending data set BMC.MVLNX.RPMS(MMLDS390)
250 Transfer completed successfully.
6424992 bytes received in 3.4 seconds (1.8e+03 Kbytes/s)
200 Representation type is Ascii NonPrint
250 The working directory "BMC.MVLNX.BBSAMP" is a partitioned data set
local: /tmp/mmldinst.new remote: mmldinst
227 Entering Passive Mode (172,19,164,166,13,9)
125 Sending data set BMC.MVLNX.BBSAMP(MMLDINST) FIXrecfm 80
250 Transfer completed successfully.
18536 bytes received in 0.015 seconds (1.2e+03 Kbytes/s)
local: /tmp/mmldsrv.ini remote: mmldini
227 Entering Passive Mode (172,19,164,166,13,12)
125 Sending data set BMC.MVLNX.BBSAMP(MMLDINI) FIXrecfm 80
250 Transfer completed successfully.
75 bytes received in 0.0031 seconds (23 Kbytes/s)
local: /tmp/mmldtest remote: mmldtest
227 Entering Passive Mode (172,19,164,166,13,13)
125 Sending data set BMC.MVLNX.BBSAMP(MMLDTEST) FIXrecfm 80
250 Transfer completed successfully.
788 bytes received in 0.0029 seconds (2.6e+02 Kbytes/s)
250 The working directory "BMC.MVLNX.UBBSAMP" is a partitioned data set
local: /tmp/mmldsrv.ini remote: mmldini
227 Entering Passive Mode (172,19,164,166,13,14)
550 Request nonexistent member BMC.MVLNX.UBBSAMP(MMLDINI) to be sent.
local: /tmp/mmldtest remote: mmldtest
227 Entering Passive Mode (172,19,164,166,13,15)
550 Request nonexistent member BMC.MVLNX.UBBSAMP(MMLDTEST) to be sent.
221 Quit command received. Goodbye.
Installing MAINVIEW for Linux ...
mmldinst: running install of bgscollect (may take a few minutes) ...
mmldinst: install of bgscollect done.
mmldinst: installing /tmp/bmcmml.S390.rpm
Preparing... ########################################### [100%]
1:bmcmml ########################################### [100%]
MML Data Server set to run at runlevel '3'
mmldinst: issuing 'mmldsrv edit -h MVS1 -p 5101 -u mmldusr -b y'
mmldinst: issuing 'mmldsrv start'
Starting MAINVIEW for Linux ...
MAINVIEW for Linux started.
mmldinst: issuing 'mmldsrv stat'
mmldusr 18369 1.0 2.6 13040 6640 pts/0 S+ 16:34 0:00
/opt/bmc/mml/sbin/mmldsrv -if /opt/bmc/mml/mmldsrv.ini -ef
/var/bmc/mml/mmldsrv.log
mmldusr 18384 0.3 1.2 7580 3164 ? Ss 16:34 0:00 bgscollect -I
noInstance -B /usr/adm/best1_default
bgscollect 7.4.00 SuSE Linux 8.1 (s390, 32 Bit) 7.4.00.6027 Jul 4 2007
mmldinst: issuing 'cat /var/bmc/mml/mmldsrv.log'
08/28/08 16:34:10 001 284002 - mml0dcmn: main : MAINVIEW for Linux Data Server
program /opt/bmc/mml/sbin/mmldsrv is starting - version 1.4.00 fixlevel BPN1202
08/28/08 16:34:11 400 284017 - MMLCosServerConnectionManager::connect :
08/28/08 16:34:11 400 284017 - Connecting to RTServer on MVS1 port 5101
08/28/08 16:34:11 400 284017 - MMLCosServerConnectionManager::connect :
08/28/08 16:34:11 400 284017 - Connection successful
mmldinst: Install of MAINVIEW for Linux finished.
This section includes the following topics:
Related topic
Tip: For faster searching, add an asterisk to the end of your partial query. Example: cert*