Managed resources
The following tables describe the transactions and programs that are created and discarded by MainView for CICS. These tables list the definition parameters for transaction and program resources along with the values defined for them.
MainView for CICS transactions
Parameter | BCRT | FCD2 | JNL2 | SMN2 | FIC2 |
|---|---|---|---|---|---|
ACTION | backout | backout | backout | backout | backout |
CMDSEC | no | no | no | no | no |
CONFDATA | no | no | no | no | no |
DTIMOUT | no | no | no | no | no |
DUMP | yes | yes | yes | yes | yes |
DYNAMIC | no | no | no | no | no |
ISOLATE | no | no | no | no | no |
PRIORITY | 240 | 255 | 255 | 255 | 1 |
PROFILE | DFHCICST | DFHCICST | DFHCICST | DFHCICST | DFHCICST |
Program | BBK1CRTR | CMRFCMDx | OLTJRNLx | CMRTMON | CMRROLLx |
RESSEC | no | no | no | no | no |
RESTART | no | no | no | no | no |
ROUTABLE | no | no | no | no | no |
RUNAWAY | system | system | system | system | system |
SHUTDOWN | disabled | disabled | disabled | disabled | disabled |
SPURGE | yes | yes | yes | yes | yes |
STATUS | enabled | enabled | enabled | enabled | enabled |
STORAGECLEAR | no | no | no | no | no |
TASKDATAKEY | CICS | CICS | CICS | CICS | CICS |
TASKDATALOC | any | any | any | any | any |
TPURGE | yes | yes | yes | yes | yes |
TRACE | yes | yes | yes | yes | yes |
TRANCLASS | DFHTCL00 | DFHTCL00 | DFHTCL00 | DFHTCL00 | DFHTCL00 |
TWASIZE | 0 | 0 | 0 | 0 | 0 |
WAIT | yes | yes | yes | yes | yes |
WAITTIME | 0,0,0 | 0,0,0 | 0,0,0 | 0,0,0 | 0,0,0 |
In the following table, BBK1rrrx represents programs that collect data for views in windows mode.
The variable rrr represents the record ID and x represents a suffix based on the CICS release. For more information, see Resource-descriptions-and-conflicts.
MainView for CICS programs BALPUTLV—BBK1rrrx
Parameter | BALPUTLV | BBK1CCE | BBK1CRTR | BBK1rrrx |
|---|---|---|---|---|
LANGUAGE | Assembler | Assembler | Assembler | Assembler |
RELOAD | no | no | no | no |
RESIDENT | no | no | yes | no |
USAGE | normal | normal | normal | normal |
USELPACOPY | no | no | no | no |
STATUS | enabled | enabled | enabled | enabled |
CEDF | yes | no | no | yes |
DATALOCATION | below | any | any | any |
EXECKEY | CICS | CICS | CICS | CICS |
CONCURRENCY | QUASIRENT | QUASIRENT | QUASIRENT | QUASIRENT |
DYNAMIC | no | no | no | no |
EXECUTIONSET | FULLAPI | FULLAPI | FULLAPI | FULLAPI |
JVM | no | no | no | no |
In the following table, x represents a suffix based on the CICS release.
MainView for CICS programs CMR9RLSE: CMRKCPXx
Parameter | CMR9RLSE | CMRCMPXx | CMRFCMDx | CMRINT2 | CMRKCPXx |
|---|---|---|---|---|---|
LANGUAGE | Assembler | Assembler | Assembler | Assembler | Assembler |
RELOAD | no | no | no | no | no |
RESIDENT | no | yes | no | yes | yes |
USAGE | normal | normal | normal | normal | normal |
USELPACOPY | no | no | no | no | no |
STATUS | enabled | enabled | enabled | enabled | enabled |
CEDF | no | no | no | no | no |
DATALOCATION | any | any | any | any | any |
EXECKEY | CICS | CICS | CICS | CICS | CICS |
CONCURRENCY | QUASIRENT | QUASIRENT (THREADSAFE for TS 2.2 and later) | QUASIRENT | QUASIRENT | QUASIRENT (THREADSAFE for TS 2.2 and later) |
DYNAMIC | no | no | no | no | no |
EXECUTIONSET | FULLAPI | FULLAPI | FULLAPI | FULLAPI | FULLAPI |
JVM | no | no | no | no | no |
In the following table, x represents a suffix based on the CICS release.
MainView for CICS programs CMRROLLx: CMRTRUEX
Parameter | CMRROLLx | CMRSLOGx | CMRTMAP | CMRTMON | CMRTRUEx | CMRTRUEX |
|---|---|---|---|---|---|---|
LANGUAGE | Assembler | Assembler | Assembler | Assembler | Assembler | Assembler |
RELOAD | no | no | no | no | no | no |
RESIDENT | yes | yes | no | no | yes | yes |
USAGE | normal | normal | normal | normal | normal | normal |
USELPACOPY | no | no | no | no | no | no |
STATUS | Enabled | Enabled | Enabled | Enabled | Enabled | Enabled |
CEDF | no | yes | yes | yes | no | no |
DATALOCATION | any | any | any | any | any | any |
EXECKEY | CICS | CICS | CICS | CICS | CICS | CICS |
CONCURRENCY | QUASIRENT | QUASIRENT | QUASIRENT | QUASIRENT | QUASIRENT (THREADSAFE for TS 2.2 and later) | QUASIRENT (THREADSAFE for TS 2.2 and later) Note: not discarded |
DYNAMIC | no | no | no | no | no | no |
EXECUTIONSET | FULLAPI | FULLAPI | FULLAPI | FULLAPI | FULLAPI | FULLAPI |
JVM | no | no | no | no | no | no |
In the following table, x represents a suffix based on the CICS release.
MainView for CICS programs CMRXEIOx: OLTCCRE
Parameter | CMRXEIOx | CMRXEIST | CMRXTFG | CSLOAD | CSLOADC | OLTCCRE |
|---|---|---|---|---|---|---|
LANGUAGE | Assembler | Assembler | Assembler | Assembler | Assembler | Assembler |
RELOAD | no | no | no | no | no | no |
RESIDENT | yes | yes | yes | no | no | no |
USAGE | normal | normal | normal | normal | normal | normal |
USELPACOPY | no | no | no | no | no | no |
STATUS | enabled | enabled | enabled | enabled | enabled | enabled |
CEDF | no | no | no | no | no | no |
DATALOCATION | any | any | any | any | below | any |
EXECKEY | CICS | CICS | CICS | CICS | CICS | CICS |
CONCURRENCY | QUASIRENT (THREADSAFE for TS 2.2 and later) | QUASIRENT (THREADSAFE for TS 2.2 and later) | QUASIRENT | QUASIRENT | QUASIRENT | QUASIRENT |
DYNAMIC | no | no | no | no | no | no |
EXECUTIONSET | FULLAPI | FULLAPI | FULLAPI | FULLAPI | FULLAPI | FULLAPI |
JVM | no | no | no | no | no | no |
In the following table, x represents a suffix based on the CICS release.
MainView for CICS programs OLTCNTL—OLTVER
Parameter | OLTCNTL | OLTFSETx | OLTJRNLx | OLTSCAO | OLTSCMRx | OLTVER |
|---|---|---|---|---|---|---|
LANGUAGE | Assembler | Assembler | Assembler | Assembler | Assembler | Assembler |
RELOAD | no | no | no | no | no | no |
RESIDENT | no | no | yes | no | no | no |
USAGE | normal | normal | normal | normal | normal | normal |
USELPACOPY | no | no | no | no | no | no |
STATUS | enabled | enabled | enabled | enabled | enabled | enabled |
CEDF | yes | yes | no | no | no | yes |
DATALOCATION | any | any | any | any | any | any |
EXECKEY | CICS | CICS | CICS | CICS | CICS | CICS |
CONCURRENCY | QUASIRENT | QUASIRENT | QUASIRENT | QUASIRENT | QUASIRENT | QUASIRENT |
DYNAMIC | no | no | no | no | no | no |
EXECUTIONSET | FULLAPI | FULLAPI | FULLAPI | FULLAPI | FULLAPI | FULLAPI |
JVM | no | no | no | no | no | no |
MainView for CICS programs OLTACON and OLTACICS
Parameter | OLTACON | OLTACICS |
|---|---|---|
LANGUAGE | Assembler | Assembler |
RELOAD | no | no |
RESIDENT | no | no |
USAGE | normal | normal |
USELPACOPY | no | no |
STATUS | enabled | enabled |
CEDF | no | no |
DATALOCATION | any | any |
EXECKEY | CICS | CICS |
CONCURRENCY | QUASIRENT | QUASIRENT |
API | CICSAPI | CICSAPI |
DYNAMIC | no | no |
EXECUTIONSET | FULLAPI | FULLAPI |
JVM | no | no |
JVMPROFILE | DFHJVMPR | DFHJVMPR |
MainView AutoOPERATOR for CICS transactions
Parameter | FCM1 |
|---|---|
ACTION | backout |
CMDSEC | no |
CONFDATA | no |
DTIMOUT | no |
DUMP | yes |
DYNAMIC | no |
ISOLATE | no |
PRIORITY | 1 |
PROFILE | DFHCICST |
Program | CBQCMD |
RESSEC | no |
RESTART | no |
ROUTABLE | no |
RUNAWAY | system |
SHUTDOWN | disabled |
SPURGE | no |
STATUS | enabled |
STORAGECLEAR | no |
TASKDATAKEY | CICS |
TASKDATALOC | any |
TPURGE | no |
TRACE | yes |
TRANCLASS | DFHTCL00 |
TWASIZE | 0 |
WAIT | yes |
WAITTIME | 0,0,0 |
MainView AutoOPERATOR for CICS programs
Parameter | CBQCMD | CMRTDPXx | OLTCAORL |
|---|---|---|---|
LANGUAGE | Assembler | Assembler | Assembler |
RELOAD | no | no | no |
RESIDENT | no | yes | no |
USAGE | normal | normal | normal |
USELPACOPY | no | no | no |
STATUS | enabled | enabled | enabled |
CEDF | no | no | no |
DATALOCATION | any | any | any |
EXECKEY | CICS | CICS | CICS |
CONCURRENCY | QUASIRENT | QUASIRENT | QUASIRENT |
DYNAMIC | no | no | no |
EXECUTIONSET | FULLAPI | FULLAPI | FULLAPI |
JVM | no | no | no |