Migrating a CSM database from a previous release
This procedure is required only if you are migrating from MainView AutoOPERATOR version 5.1.xx or earlier. If you are migrating from MainView AutoOPERATOR 6.1.xx or later, you only need to use the REPRO command to copy the CSM repository to a new repository that the newer release of CSM PAS will use.
To migrate a CSM database from a previous release
Log on to a terminal session and access the CSM Global Overview panel (as shown in Figure 1).
Figure 1. CSM Global Overview panel
BMC Software ------------------ Global Overview ------------------ AutoOPERATOR
COMMAND ===> SCROLL ===> CSR
TGT --- AO6A
Primary Commands: EXCeption Group SORT SAVE ADD
CALendar CANCEL UNsort CONVERT BUild
Locate CMDSHOW Xref SAVERULE
Line Command - Enter "/" to Select Action
LC Object Group System Actual Desired Ind Type
________ ________ ________ ____________ ____________ _____ ________
___ AAOCSM07 AO6A SJSC STC-NORM
___ AAOCSM08 AO6A SJSC STC-NORM
___ AAOCSM09 AO6A SJSC STC-NORM
___ AAOCSM10 AO6A SJSC STC-NORM
___ CSBEMSTR AO61 SJSE STARTING UP XE STC-NORM
___ MVS
******************************* Bottom of data ********************************On the COMMAND line, enter the CONVERT primary command. The CSM Conversion panel is displayed (see Figure 2).
Figure 2. CSM Conversion panel
B ---------------------------------------------------------------------- ERATOR
C | BMC Software ----- CSM Conversion - Input data ------ AutoOPERATOR | > CSR
| COMMAND ===> | AO6A
P | |
| Specify the name of the data set and the member containing the CSM |
| objects to be converted into v6.1 format and stored in the |
| repository data set ESP.CAN.MV3905.AO61.BBIREPS |
L | | pe
| Data Set Name ===> ____________________________________________ | ____
_ | | NORM
_ | Member ===> _______ | NORM
_ | | NORM
_ | Specify the name of a data set where the Conversion Log will be | NORM
_ | written. If you specify a nonexistent data set it will be allocated|
* | dynamically. | ******
| |
| Data Set Name ===> ____________________________________________ |
| |
| Disposition ===> ___ (SHR/MOD) |
| |
| Enter END command to process and continue with the CSM Group |
| definitions or enter CANCEL to leave |
----------------------------------------------------------------------- Follow the instructions on the panel.
- In the first Data Set Name field, enter the name of the CSM data set that you are replacing.
- In the Member field, enter the member name (for example: CSM ssid).
- In the second Data Set Name field, specify the name of a data set where the conversion process logs information that is related to the conversion.The data set may be a preallocated RECFM=FB, LRECL=80 data set or the data set may be dynamically allocated with these DCB attributes: RECFM=FB, LRECL=80, BLKSIZE=23680.
- In the Disposition field, specify one of the following choices:
- MOD causes the Routine to append data to the end of the sequential data set.
- SHR causes the Routine to write data at the beginning of the data set.
- The resulting Conversion Log contains information such as the conversion date and time, user ID, the input database name, the Group name, and a list of the converted objects and exceptions.
- After you enter this information, the Group Detail Control panel is displayed.
On the Group Detail Control panel, enter information related to the CSM group that is being converted.
Figure 3 shows an example of a completed Group Detail Control panel.
Figure 3. Completed Group Detail Control panel
BMC Software ----------- Group Detail Control - Add ---------- AutoOPERATOR
COMMAND ===> TGT --- KMZ1
Group Name ===> SYSB____
Command Prefix ===> CSMKM___________
Rule information:
Ruleset Dataset ===> BAOKMZ.AAO61.KMZ1.UBBPARM
Ruleset Id ===> G2 Rule Prefix ===> ACM1 Suffix ===> 0001
Object Statistics:
Dataset Name ===> BAOKMZ.KMZ1.OFFLOAD
Disposition ===> MOD
Application information:
Author ===> BAOKMZ2
Description ===> GROUP LIST FOR SYSB
Enter END command to process and return or CANCEL to leaveThe default name of the CSM group is created from the last four characters of the CSMssid member that is being converted. You can choose your own group name by typing over the default name. If the name that you choose already exists, a pop-up window is displayed, asking for a new Group Name.
Enter a new Group Name in the pop-up window (Figure 4) or enter CANCEL to terminate the conversion.
Figure 4. Pop-up window for new Group name
BMC Software ---- CSM Conversion - Group name -------------------- AutoOPERATOR
COMMAND ===>
Group name NS61 already exists. Specify new name for CSM Group.
Group Name ===> ________
Enter END command to process or CANCEL to leaveAs the conversion progresses, a pop-up window (Figure 5) is displayed and as every five objects are converted, the counter is updated.
Figure 5. CSM Conversion Status pop-up window
BMC Software ----- CSM Conversion Status ----- AutoOPERATOR
CSM Conversion in Progress
15 of 164 objects convertedWhen the conversion is complete, the CSM Conversion Log is displayed (Figure 6).
Figure 6. CSM Conversion Log
********************************* Top of Data ********************************
BMC Software CSM Conversion Log
Input database .... BAONIS.NS61.BBPARM(CSMNEW)
Converted by ...... BAONIS2 at: 16:54 on: 10/05/2000
New Group ......... NEW
Objects processed . 50
Conversion status . Successful for group NEW. No exceptions.
Objects Exception Notes
------- ---------------
AAOCSMN1
AAOCSMN2
AAOCSMN3
AAOCSMN4
AAOCSMN5
AAOCSMN6During conversion, you might encounter conflicts or mismatches with object definitions. For more information about resolving object-definition mismatches, refer to Resolving-object-definition-conflicts-after-converting.
Press End from the CSM Conversion Log.The converted CSM objects and newly created Group are displayed on the CSM Global Overview panel (Figure 7).
Figure 7. Completed CSM data set conversion
BMC Software -------------- Global Overview ------------- Conversion Successful
COMMAND ===> Scroll ===> PAGE
TGT --- NS61
Primary Commands: EXCeption Group SORT SAVE ADD
CALendar CANCEL UNsort CONVERT
Locate CMDSHOW Xref SAVERULE
Line Command - Enter "/" to Select Action
LC Object Group-Id System Actual Desired Ind Type
________ ________ ________ ____________ ____________ _____ ________
___ AAOQAS01 NS61 UNKNOWN UNKNOWN
___ AAONS61 NS61 UNKNOWN UNKNOWN
___ CAS NS61 UNKNOWN UNKNOWN
___ CICS11 NS61 UNKNOWN UNKNOWN
___ IMS71X NS61 UNKNOWN UNKNOWN
___ TSO NS61 UNKNOWN UNKNOWN
___ MVS
******************************* Bottom of data *******************************- Repeat Step 2 through Step 8 for each version 4.1 or 5.1 CSM data set and member name to be converted.