Hardware Group Section
The CPU Utilization Report provides a Hardware Group Section that lists each hardware group with its respective group capping limit in CPUs per physical processor type, and names the LPARs that are in the hardware group.
This section is produced only if there is at least one hardware group with at least one capping limit set on a physical processor type (CP, zIIP, ICF, or IFL).
An example of the Hardware Group Section of the CPU Utilization Report is shown in the following figure.
BMC Software, Inc. XYZ Company REPORT DATE: 10 FEB 17 11.43
ACTL 10 FEB 17 08.00.00 10 FEB 17 11.30.00 WORLDWIDE HEADQUARTERS SYSTEM ID: SJSD Z 2.01.0
BASED ON REC TYPE/# RECS/# SAMPLES/REC HOURS: 240-1/14/12.5K/3.5 70-1/14/12.5K/3.5
------------------------------------------ HARDWARE GROUP SECTION --------------------------------------------
HARDWARE PARTITION SYSTEM ------ GROUP PROCESSOR LIMIT -------
GROUP NAME NAME CP zIIP ICF IFL
SJTEST2 IOC2 IOC2 8.10 0 0 0
SJSH SJSH
SJTEST3 SJSC SJSC 10.50 10.00 0 0
SJSD SJSD
Hardware Group Section field descriptions
The table below describes each field in the Hardware Group Section of the CPU Utilization Report.
Field | Description | |
|---|---|---|
HARDWARE GROUP | name of the hardware group | |
PARTITION NAME | name of the LPAR, a member of the hardware group | |
SYSTEM NAME | MVS system name | |
GROUP PROCESSOR LIMIT | capping limit for each processor type, in number of CPUs | |
CP | capping limit set on CPs of the hardware group | |
zIIP | capping limit set on zIIPs of the hardware group | |
ICF | capping limit set on ICFs of the hardware group | |
IFL | capping limit set on IFLs of the hardware group | |
Related topic