Cache Subsystems Overview Report


This report is produced by the CACHEACT Analyzer control statement when the REPORT= parameter is either omitted or specified as REPORT=OVERVIEW.

Use this report to see an overview of each subsystem's activity or to find out if a particular subsystem is either under- or overutilized.

By default, subsystems are ordered by subsystem ID (SSID on the report), but the order can be changed by the ORDER= parameter. The report can be filtered by cache subsystem model type or subsystem ID.

The following figure shows an example of the Cache Subsystems Overview Report.

PRODUCED BY CMF ANALYZER (v.r.mm  RSL yymm )                  CACHE SUBSYSTEMS OVERVIEW REPORT                     RPTSEQ     3 PAGE      5     
BMC SOFTWARE, INC.                                        BMC SOFTWARE, INC.                            REPORT DATE: DD MMM YY 16.44
REQD 10 JUN YY 09.50.00  10 JUN YY 10.20.00                  HOUSTON, TX.                              SYSTEM ID: SJSE     Z v.rr.n
ACTL 10 JUN YY 09.50.00  10 JUN YY 10.20.00                                                             REPORT CYCLE: CYCLE099       

BASED ON REC TYPE/# RECS/# SAMPLES/REC HOURS:  74-5/24/0/0.5                                                                         

              CTRL        STORAGE(MB)  --I/O RATE-  --CACHE HIT RATE-  -----DASD I/O RATE-----------  ASYNC  -----% HITS------    %  
SSID    TYPE  UNIT STATUS CACHE   NVS  CACHE   OFF   READ   DFW   CFW  STAGE DFWBP   ICL   BYP OTHER   RATE  TOTAL  READ WRITE  READ
----  ------- ---- ------ ----- -----  ----- -----  ----- ----- -----  ----- ----- ----- ----- -----  -----  ----- ----- ----- -----
0027  3990-03 5590 ACTIVE 1,024     8    0.4     0    0.4     0     0      0     0     0     0     0      0   99.9  99.9     0 100.0
0140  3990-06 8350 ACTIVE 28.1K   192  640.4     0  564.1  61.1     0    9.3     0   0.2   5.7     0   18.2   97.6  98.4  99.9  90.4
0144  3990-06 8733 ACTIVE 28.1K   192  192.5     0   97.9  94.4     0    0.2     0     0     0     0      0   99.9  99.8 100.0  51.0
0240  3990-06 8573 ACTIVE 28.1K   192  340.0     0  274.7  45.0     0    7.1     0     0  13.5     0   14.4   94.0  97.6  99.3  86.2
A300  2105-20 A333 ACTIVE 4,096   192    8.1     0    2.9   5.1     0      0     0     0     0     0    1.4  100.0  99.9 100.0  36.4
AC03  2105-20 C103 ACTIVE 4,096   192   25.8     0   25.6   0.1     0      0     0     0     0     0    0.1  100.0 100.0 100.0  99.4


PRODUCED BY CMF ANALYZER (v.r.mm  RSL yymm )                  CACHE SUBSYSTEMS OVERVIEW REPORT                     RPTSEQ     3 PAGE      6     
BMC SOFTWARE, INC.                                        BMC SOFTWARE, INC.                            REPORT DATE: DD MMM YY 16.44
REQD 10 JUN YY 09.50.00  10 JUN YY 10.20.00                  HOUSTON, TX.                               SYSTEM ID: SJSE     Z v.rr.n
ACTL 10 JUN YY 09.50.00  10 JUN YY 10.20.00                                                             REPORT CYCLE: CYCLE099       

BASED ON REC TYPE/# RECS/# SAMPLES/REC HOURS:  74-5/24/0/0.5                                                                         

----------------------------------- MOST ACTIVE DEVICES -- IN DESCENDING ORDER BY TOTAL I/O RATE -----------------------------------

  DEV  VOLUME        ----STATUS---     %     I/O   -CACHE HIT RATE-  --------DASD I/O RATE--------  ASYNC  -------% HITS------     %  
  NUM  SERIAL  SSID  CACHE  DASDFW    I/O   RATE   READ   DFW   CFW  STAGE DFWBP   ICL   BYP OTHER   RATE  TOTAL   READ  WRITE   READ
-----  ------  ----  ------ ------  -----  -----  ----- ----- -----  ----- ----- ----- ----- -----  -----  -----  -----  -----  -----
08710  TSG337  0144  ACTIVE ACTIVE   87.7  168.9   84.5  84.4     0      0     0     0     0     0      0  100.0  100.0  100.0   50.0
08368  BAB319  0140  ACTIVE ACTIVE    6.9   44.4   43.8   0.1     0    0.5     0     0     0     0      0   98.9   98.9  100.0   99.7
083AE  TSG322  0140  ACTIVE ACTIVE    6.9   44.2   43.7   0.4     0      0     0     0     0     0    0.1   99.9   99.9  100.0   99.0
083AC  TSG320  0140  ACTIVE ACTIVE    4.2   27.0   26.6   0.1     0    0.2     0     0     0     0      0   99.3   99.3  100.0   99.5
083A2  TSG310  0140  ACTIVE ACTIVE    3.3   20.9   20.8     0     0    0.1     0     0     0     0      0   99.7   99.7  100.0  100.0
08525  SAZ12I  0240  ACTIVE ACTIVE    6.1   20.6   20.4     0     0    0.2     0     0     0     0      0   99.1   99.1      0  100.0
08712  TSG339  0144  ACTIVE ACTIVE   10.4   20.1   10.1  10.0     0      0     0     0     0     0      0  100.0  100.0  100.0   50.1
08526  SAZ12J  0240  ACTIVE ACTIVE    5.7   19.5   19.4     0     0      0     0     0     0     0      0   99.7   99.7      0  100.0
0C11A  SHK026  AC03  ACTIVE ACTIVE   73.5   18.9   18.9     0     0      0     0     0     0     0      0  100.0  100.0      0  100.0
085E9  TSG324  0240  ACTIVE ACTIVE    5.0   17.0   14.3   2.7     0    0.1     0     0     0     0    0.1   99.6   99.6   99.8   84.2
08552  APD282  0240  ACTIVE ACTIVE    4.7   15.9    7.8   7.6     0      0     0     0   0.5     0    0.3   96.9   99.7   99.9   50.6
08330  TSG301  0140  ACTIVE ACTIVE    2.5   15.7   14.2   0.2     0    1.3     0     0     0     0    0.1   91.5   91.5   99.1   98.8
08360  BAB311  0140  ACTIVE ACTIVE    2.2   14.1   13.9   0.2     0    0.1     0     0     0     0      0   99.5   99.4  100.0   98.9
08311  SYM030  0140  ACTIVE ACTIVE    2.1   13.7   11.0   2.7     0      0     0     0     0     0    0.1   99.8   99.9   99.7   80.6
08367  BAB318  0140  ACTIVE ACTIVE    2.0   13.1   12.9   0.1     0    0.1     0     0     0     0    0.1   99.0   99.0   99.2   99.5
08306  SYSP14  0140  ACTIVE ACTIVE    1.9   12.4   11.9   0.5     0      0     0     0     0     0    0.1   99.9   99.9  100.0   96.1
08308  SYSP15  0140  ACTIVE ACTIVE    1.9   12.2   11.9   0.3     0      0     0     0     0     0    0.1   99.7   99.7   99.8   97.9
083A0  TSG308  0140  ACTIVE ACTIVE    1.9   12.1   11.5   0.6     0      0     0     0     0     0    0.2   99.9   99.9  100.0   95.3


----------------------------------- MOST ACTIVE DEVICES -- IN DESCENDING ORDER BY DASD I/O RATE ------------------------------------

  DEV  VOLUME        ----STATUS---     %     I/O   -CACHE HIT RATE-  --------DASD I/O RATE--------  ASYNC  -------% HITS------     %  
  NUM  SERIAL  SSID  CACHE  DASDFW    I/O   RATE   READ   DFW   CFW  STAGE DFWBP   ICL   BYP OTHER   RATE  TOTAL   READ  WRITE   READ
-----  ------  ----  ------ ------  -----  -----  ----- ----- -----  ----- ----- ----- ----- -----  -----  -----  -----  -----  -----
0858C  SAEPG1  0240  ACTIVE ACTIVE    2.5    8.4    0.2   0.1     0      0     0     0   8.1     0    1.2    3.3   99.7  100.0   66.5
0833B  SAEPG2  0140  ACTIVE ACTIVE    0.4    2.3    0.1     0     0      0     0     0   2.3     0    1.6    2.5   98.1      0  100.0
0850F  SHRA06  0240  ACTIVE ACTIVE    0.6    2.1    0.3     0     0      0     0     0   1.8     0      0   16.4   99.3  100.0   96.2
08572  SANWK1  0240  ACTIVE ACTIVE    1.2    4.2    0.8   1.6     0      0     0     0   1.7     0    0.4   58.6   99.5   99.9   34.3
08330  TSG301  0140  ACTIVE ACTIVE    2.5   15.7   14.2   0.2     0    1.3     0     0     0     0    0.1   91.5   91.5   99.1   98.8
0851B  BAB303  0240  ACTIVE ACTIVE    2.6    8.9    4.9   2.8     0    0.3     0     0   0.9     0    0.1   85.9   93.9  100.0   65.3
0830B  SMFE36  0140  ACTIVE ACTIVE    0.4    2.6    0.1   1.6     0      0     0     0   0.9     0    0.9   63.1   97.8  100.0    3.1
08307  PAGF49  0140  ACTIVE ACTIVE    0.2    1.0    0.1     0     0      0     0     0   0.9     0    1.4    8.3  100.0  100.0   81.6
085C7  BAB367  0240  ACTIVE ACTIVE    1.3    4.5    3.6   0.2     0    0.7     0     0     0     0      0   84.4   83.8   99.4   96.0
085BE  SMS005  0240  ACTIVE ACTIVE    0.4    1.3    0.8     0     0    0.5     0     0     0     0      0   60.6   60.6  100.0  100.0
08552  APD282  0240  ACTIVE ACTIVE    4.7   15.9    7.8   7.6     0      0     0     0   0.5     0    0.3   96.9   99.7   99.9   50.6
08368  BAB319  0140  ACTIVE ACTIVE    6.9   44.4   43.8   0.1     0    0.5     0     0     0     0      0   98.9   98.9  100.0   99.7
085C8  BAB368  0240  ACTIVE ACTIVE    1.5    5.0    4.5   0.1     0    0.4     0     0     0     0      0   91.8   91.6   99.6   97.4
083AF  HSM300  0140  ACTIVE ACTIVE    1.6   10.0    9.3   0.4     0    0.4     0     0     0     0    0.3   96.0   95.9  100.0   96.3
083F3  FAT307  0140  ACTIVE ACTIVE    0.5    3.4    2.9   0.1     0    0.4     0     0     0     0      0   88.2   88.0  100.0   98.1
08369  BAB320  0140  ACTIVE ACTIVE    1.3    8.4    6.9   1.1     0    0.4     0     0     0     0    0.3   95.5   94.8  100.0   86.3
085C6  BAB366  0240  ACTIVE ACTIVE    1.4    4.8    4.4   0.1     0    0.4     0     0     0     0    0.1   92.6   92.5   99.2   98.6
0856C  FAT312  0240  ACTIVE ACTIVE    1.5    5.0    4.5   0.1     0    0.3     0     0     0     0    0.1   93.2   93.1  100.0   97.4

Cache Subsystems Overview Report field descriptions

The following table describes each field that is displayed in the Cache Subsystems Overview Report.

Field

Description

Overview section

SSID

Subsystem ID—a four-digit hexadecimal identifier that uniquely identifies the cache subsystem

TYPE

Cache subsystem type

CTRL UNIT

Physical control unit number of the caching subsystem; this number is equal to the lowest device number for the subsystem

STATUS

Caching status of the entire subsystem

STORAGE (MB)

Storage amounts, in megabytes:

  • CACHE— amount of storage configured for caching in the subsystem
  • NVS— amount of Non-Volatile Storage (NVS) storage in the subsystem

I/O RATE

I/O requests per second, by type:

CACHE— number of cacheable I/O requests to cache devices
OFF— number of I/O requests to non-cache devices

CACHE HIT RATE

I/O requests per second that completed without accessing DASD, by type:

  • READ— number of READ requests
  • DFW— number of DFW (DASD Fast Write) requests
  • CFW— number of CFW (Cache Fast Write) requests

DASD I/O RATE

I/O requests per second that accessed DASD, by type:

  • STAGE— number of normal or sequential requests
  • DFWBP— number of requests that caused DFW to be bypassed
  • ICL— number of ICL (Inhibit Cache Load) requests
  • BYP— number of requests that explicitly bypassed the cache
  • OTHER— number of requests that were either CFW BYPASS or DFW INHIBIT requests
  • ASYNC RATE— number of tracks asynchronously written to DASD in order to release space in cache or NVS storage
    A high rate indicates storage could be overcommitted.

% HITS

I/O requests serviced from the cache, as percentages of all I/O requests:

  • TOTAL— percentage of READ and WRITE requests serviced from the cache
  • READ— percentage of READ requests serviced from the cache
  • WRITE— percentage of WRITE requests serviced from the cache

READ

READ requests as a percentage of all I/O requests

MOST ACTIVE DEVICES sections

IN DESCENDING ORDER BY TOTAL I/O RATE and BY DASD I/O RATE

DEV NUM

Five-digit device number that uniquely identifies the DASD device

VOLUME SERIAL

Volume serial number

SSID

Subsystem ID—a four-digit hexadecimal identifier that uniquely identifies the cache subsystem

STATUS


Cache status of the DASD device:

  • CACHE— caching status
  • DASDFW— DASD Fast Write (DFW) status

% I/O

I/O requests to this DASD volume, as a percentage of all I/O requests to the cache subsystem to which it belongs

I/O RATE

I/O requests per second to the volume

CACHE HIT RATE


I/O requests per second that completed without accessing DASD, by request type:

  • READ— number of READ requests
  • DFW— number of DFW (DASD Fast Write) requests
  • CFW— number of CFW (Cache Fast Write) requests

DASD I/O RATE


I/O requests per second that accessed DASD, by request type:

  • STAGE— normal or sequential requests
  • DFWBP— requests that caused DFW to be bypassed
  • ICL— ICL (Inhibit Cache Load) requests
  • BYP— requests that explicitly bypassed the cache
  • OTHER— requests that were either CFW BYPASS or DFW INHIBIT requests
  • ASYNC RATE— number of tracks asynchronously written to the DASD device in order to release space in the cache or NVS storage

A high rate indicates that storage could be overcommitted.

% HITS


I/O requests serviced from the cache, as percentages of all I/O requests:

  • TOTAL— percentage of READ and WRITE requests serviced from the cache
  • READ— percentage of READ requests serviced from the cache
  • WRITE— percentage of WRITE requests serviced from the cache

READ

READ requests as a percentage of all I/O requests

 

Tip: For faster searching, add an asterisk to the end of your partial query. Example: cert*

CMF MONITOR 6.1