Writer instructions
Page title	For most spaces, this page must be titled Space announcements. For spaces with localized content, this page must be titled Space announcements l10n.
Purpose	Provide an announcement banner on every page of your space.
Location	Move this page outside of your home branch.
Guidelines	Adding-a-banner-announcement-to-a-space

Defining SNMP parameters

Use the following procedure to update SNMP parameters dynamically for each IP node that you want to monitor.

To define SNMP parameters

From the EZIP menu, select SNMP Data from the TCP/IP Activity section, and press Enter.
From the EZSNMP menu, select Define from the Detail Views section, and press Enter.The Define view (SNMPDEF) is displayed (see the following figure).
SNMP Define view
DDMMMYYYY hh:mm:ss ----------- INFORMATION DISPLAY ---------------------------
COMMAND ===>                                                 SCROLL ===> PAGE
CURR WIN ===> 1        ALT WIN ===>
>W1 =SNMPDEF===========MCBSYS1==*========DDMMMYYYY==hh:mm:ss====MVIP=====D====4
Cmd Host                             IP               Community
--- Name                             Address          Name
     $DEFAULT                         000.000.000.000 public
     ipor12p.houlab.bmc.com           192.168.1.253    public
     ipor321.houlab.bmc.com           192.168.3.253    IPO
     UNKNOWN                          192.168.2.253    public
To add an IP address to the list of nodes that are monitored, type ADD in the COMMAND field.
Tip
You can delete an IP address from the list, by typing DEL in the COMMAND field.
In the IP Address field, type the IP address of the node that you want to monitor.
Tip
If you know the host name but not the IP address you can type the host name in the Host Name field. When defining the SNMP parameters, you can add or delete the host name or the IP address.
Press Enter.