Setting up the CMF Analyzer JCL Builder

When using the CMF Analyzer JCL Builder for the first time, you must set up the application for your use.

During the setup procedure the Analyzer setup panels request information specific to your environment and the tasks you plan to perform.

The setup procedure performs the following tasks:

Identifies the libraries that are used to store and fetch JCL and control statement sets
Defines default JCL and Analyzer parameters
Sets user-level session defaults

To set up the CMF Analyzer JCL Builder

If you have not performed the setup procedure, the CMF Analyzer JCL Builder—Setup Panel (1 of 4) (see the figure in Information that the CMF Analyzer JCL Builder setup panels require) is displayed automatically when you start the application.
If the CMF Analyzer JCL Builder is already set up, select S from the CMF Analyzer JCL Builder—Main Menu (see the figure in Navigating-the-CMF-Analyzer-JCL-Builder-Main-Menu) to review or edit the settings.
The CMF Analyzer JCL Builder—Setup Panel (1 of 4) opens.
Enter the values requested on the setup panel. When you are satisfied with the values that you have entered, press F3/END.
The information on the panel is saved, the panel closes, and the next setup panel opens.
Repeat step Step 2 until you have entered the requested data on all of the panels.
Important
The setup panels appear in rotation automatically. That is, when you close the current panel the next panel opens. When you close the last panel, the first one opens.
To terminate the setup procedure and return to the CMF Analyzer JCL Builder—Main Menu panel, type the EXIT or CANCEL primary command:
- The EXIT command saves the pending updates.
- The CANCEL command discards any pending updates to the current setup panel.

When you have completed the setup, the CMF Analyzer JCL Builder—Main Menu opens. Thereafter the CMF Analyzer JCL Builder—Main Menu opens when you start the application.

Information that the CMF Analyzer JCL Builder setup panels require

To set up the CMF Analyzer JCL Builder you need to provide the information solicited in each setup panel.

CMF Analyzer JCL Builder—Setup Panel (1 of 4) (see the following figure) solicits DSNs for the user libraries and model libraries where the JCL and control statement sets that you create will be stored.
- User libraries contain the JCL and control statement sets that you create and maintain.
- Model libraries contain model JCL members and model control statement data sets that are used to create new JCLLIB and CTLLIB members.
Enter values into the following fields to complete CMF Analyzer JCL Builder—Setup Panel (1 of 4) (see the following figure):
- User JCLLIB dataset
- User CTLLIB dataset
- Model JCLLIB dataset
- Model CTLLIB dataset
--------------- CMF Analyzer JCL Builder - Setup Panel (1 of 4) ----------------
Command ===>

  User libraries contain members created by you and others which you may
  submit, update, copy, replace or delete.

    User JCLLIB dataset ===> 'MVSXXX9.USER.CMFJCL'                        <===

    User CTLLIB dataset ===> 'MVSXXX9.USER.CMFCTL'                        <===

  Model libraries contain members which you may copy into members that you are
  creating or editing.

    Model JCLLIB dataset ===> 'MVSXXX9.MODEL.CMFJCL'                       <===

    Model CTLLIB dataset ===> 'MVSXXX9.MODEL.CMFCTL'                       <===

  Confirm User Actions ===> YES (YES/NO - Confirm RENAME, REPLACE and DELETE)
CMF Analyzer JCL Builder—Setup Panel (2 of 4) (see the following figure) requires you to define the execution portion of a new JCLLIB member. The panel solicits the following information:
- JOB Card definition
- SYSOUT Class
- REGION Size
- Analyzer EXEC Parameters
  For information on Analyzer EXEC parameters, see the information on PARM values in the EXEC statement described in the table in Descriptions-of-Analyzer-JCL-statements.
- STEPLIB Datasets as applicable
--------------- CMF Analyzer JCL Builder - Setup Panel (2 of 4) -------------
Command ===>

Model Job Card...
  ===> //BQM649BF JOB (4110),'ANYUSER',CLASS=F,                          <===
  ===> //             MSGCLASS=R,REGION=5500K,                           <===
  ===> //             NOTIFY=&SYSUID                                     <===
  ===>                                                                   <===
  ===>                                                                   <===
Default JCL Parameters...
  SYSOUT Class ===> *    REGION Size ===>

Default Analyzer EXEC Parameters...
  ===>                                                                   <===

STEPLIB Datasets ===> 'MVQA.ZOS.PUT1002B.BBLINK'                    <===
                 ===>                                               <===
                 ===>                                               <===
CMF Analyzer JCL Builder—Setup Panel (3 of 4) (see the following figure) requires you to define the default Analyzer input portion of a new JCLLIB member. The panel solicits the following information:
- Input Data Type—the monitor that created the input data
- CMF User Record—the CMF User Record SMF record ID
- Source of the Input Data—DATASET, LOGSTREAM, or XDS server
- Input Logstream or datasets—the DSNs of the data sets containing the input data
- Verify DSNs Now?—indicates whether DSNs entered in this panel are to be immediately verified
--------------- CMF Analyzer JCL Builder - Setup Panel (3 of 4) -------------
Command ===>

Input Data Type      ===> CPM     (ANY, CPM, IPM, MIXED, RMF)

CMF User Record      ===> 240     (128 through 255)

Source of Input Data ===> DATASET    (DATASET, LOGSTREAM, XDS)

Input Logstream or datasets...
Logstream/1st DSN    ===> 'MVQA.ZOS.PUT1002B.ISJSC.CPMOUT1'              <===
Data set 2           ===>                                                <===
Data set 3           ===>                                                <===
Data set 4           ===>                                                <===
Data set 5           ===>                                                <===
Data set 6           ===>                                                <===
Data set 7           ===>                                                <===
Data set 8           ===>                                                <===

Verify DSNs now?     ===> NO    (YES,NO)
CMF Analyzer JCL Builder—Setup Panel (4 of 4) (see the following figure) requires you to define the default Analyzer output portion of a new JCLLIB member. The panel solicits the following information:
- Analyzer Report Headings
- Multiple Systems Reports—indicates whether you require multiple system reports to be separate or combined
- Maximum Lines Per Page
- Optional Analyzer Output DSNs (as applicable)
- Verify DSNs Now?—indicates whether DSNs entered in this panel are to be immediately verified
--------------- CMF Analyzer JCL Builder - Setup Panel (4 of 4) --------
Command ===>

Analyzer Report Headings...
  Main Heading ===> A MAIN HEADING                          <===
  Sub-Heading ===> A SUBHEADING                            <===

Multiple Systems Reports ===> SEPARATE   (SEPARATE or COMBINED)

Maximum Lines Per Page   ===> 60

Optional Analyzer Output...
CMFLOG   ===>                                              <===
CMFSAVE ===>                                              <===
CMXREC   ===>                                              <===
RPTCONTS ===>                                              <===
CMFPRINT ===>                                              <===

Verify DSNs now? ===> NO    (YES, NO)

Setting up the CMF Analyzer JCL Builder

To set up the CMF Analyzer JCL Builder

Information that the CMF Analyzer JCL Builder setup panels require

On this page