CREGSYM view

Note

The CREGSYT, CREGSYA and CREGSYM views replace the CREGSYS view. The CREGSYS view displays the same data as CREGSYT.

Related topic

To display detailed information about the IBM CICS region settings related to monitoring and statistics settings, and WLM health attributes, perform one of the following actions:

Hyperlink from the Monitoring and Statistics field of the EZCFSSI menu.
Enter CREGSYM [target] on the COMMAND line, where target is the specific or generic name of a target CICS region.

The following figure is displayed:

ddmmmyyyy hh:mm:ss --------------------------------------------- BMC AMI Ops WINDOW INTERFACE (Vv.r.mm) ----------------------
COMMAND ===>
CURR WIN ===> 1        ALT WIN ===>
>W1 =CREGSYM==========(BCVDH*===*=======)ddmmmyyyy==hh:mm:ss====MVCICS===D====3============================================================================
CMD Target   CICS    Mntr Other Rcrd UOW    SMF Data    Time Mntr LRT   Appl Name Rcrd Conv Rcrd Excp Rcrd Idnt Rcrd Perf Rcrd Res   DPL Fil TSQ URI Web
---          SYSID   Rcrd Mntr Syncpoints Compression Stamp Freq       Support    Waits      Class     Class     Class     Class     Lmt Lmt Lmt Lmt Lmt
    BCVDH740 H74C    ON   RMI   NOSYNCPOINT COMPRESS    LOCAL 00:00:00   NOAPPLNAME NOCONVERSE EXCEPT    NOIDNTY   PERF      NORESRCE     0   8   8   0   0
    BCVDH750 H75C    ON   RMI   NOSYNCPOINT COMPRESS    LOCAL 00:00:00   NOAPPLNAME NOCONVERSE EXCEPT    NOIDNTY   PERF      NORESRCE     0   8   8   0   0
    BCVDH760 H76C    ON   RMI   NOSYNCPOINT COMPRESS    LOCAL 00:00:00   NOAPPLNAME NOCONVERSE EXCEPT    NOIDNTY   PERF      NORESRCE     0   8   8   0   0

Scrolled right

ddmmmyyyy hh:mm:ss ------ BMC AMI Ops WINDOW INTERFACE (Vv.r.mm) --------------------------------------
COMMAND ===>
CURR WIN ===> 1        ALT WIN ===>
<W1 =CREGSYM==========(BCVDF*===*=======)ddmmmyyyy==03:13:29====MVCICS===D====3=========================
CMD Target   Stats Stats    Stats    Stats    WLMH WLMH WLMH WLMH       Health SRR OTel Trace
---          Record Interval Next Int EOD Time Val Adjv Intv OpenSt     Check   Task   Status
    BCVDH740 OFF    01:00:00 00:00:00 00:00:00   50   25   20 OPENING    CHECK      0    N/A
    BCVDH750 OFF    01:00:00 00:00:00 00:00:00 100   25   20 OPEN       CHECK      0    N/A
    BCVDH760 OFF    01:00:00 00:00:00 00:00:00 100   25   20 OPEN       CHECK      0 NOOTELTRACE

Actions

The CREGSYM view supports the following line command actions:

Line command	Description
SET	The SET command allows you to modify the attributes that are associated with the monitoring and statistics facilities as follows: Monitor recording attributes SMF Data Compression LRT Frequency Monitor options Conversational Tasks Identity Class Transaction Resource Class UOW Syncpoints Monitor limits Maximum DPL Requests Maximum Files Maximum TS Queues URMAP limits Webservices limits Statistics recording attributes Recording Status Recording Interval End Of Day Time Monitoring, statistics facilities, and WLM Health attributes as follows: Adjustment Interval OpenStatus OTEL options Trace There are also specific line commands to change some of these values. Press F1 to access the online Help for more information about the equivalent line commands. Warning Note Be sure the field contains exactly the value that you want before pressing Enter to issue the SET command. You must clear the field of any other data to prevent it from being passed as part of the new value.
Commands that set CICS TS Monitor attributes and options
MCS	Set SMF Data Compression to COMPRESS.
MNC	Set SMF Data Compression to NOCOMPRESS.
MVS	Set Conversational Task option CONVERSE.
MNV	Set Conversational Task option NOCONVERSE.
MID	Set Identity Class option IDNTY.
MNI	Set Identity Class option NOIDNTY.
MRS	Set Resource Class option RESRCS.
MNR	Set Resource Class option NORESRCS.
MSP	Set UOW Syncpoint option SYNCPOINT.
MNS	Set UOW Syncpoint option NOSYNCPOINT.
Commands that set CICS TS Statistics recording attributes
SOF	Set Statistics Recording Status to OFF.
SON	Set Statistics Recording Status to ON.
SRC	Perform Statistics RECORD for ALL resources.
SRS	Perform Statistics RECORD and RESETNOW for ALL resources.
SCN Set Statistics, Recording Status, and RECORDNOW option	Depending on the current status switches the recording status from ON to OFF or from OFF to ON, and immediately writes the current statistics.
SSN Set Statistics, Recording Status, and RESETNOW option	Depending on the current status switches the recording status from ON to OFF or from OFF to ON, and resets the statistics to the initial values.
SRN Set Statistics, Recording Status, RECORDNOW, and RESETNOW options	Depending on the current status switches the recording status from ON to OFF or from OFF to ON, and immediately writes the current statistics. Also resets the statistics to the initial values.
Commands that set CICS TS WLMHealth attributes and options
WLC	Set CICS to start decreasing the z/OS WLM health value according to the adjustment value in the specified interval.
WLO	Set CICS to start increasing the z/OS WLM health value according to the adjustment value in the specified interval.
WLI	Set CICS to immediately set the z/OS WLM health value to 0.
Commands that set CICS TS OTEL attributes and options
OTY	Set CICS to participate in OTel tracing scenarios.
OTN	Set CICS to not participate in OTel tracing scenarios.

Related views

The following views are part of the CREGSYM family of views.

View	Description
CREGSYMZ	To display summarized information about the CICS region settings related to monitoring and statistics settings, enter SUM on the COMMAND line of the CREGSYM view.
CREGSYMD	To display detailed information about the CICS region settings related to monitoring and statistics settings and WLM health attributes, hyperlink from the Mntr Rcd field of the CREGSYM view.
CREGSYSQ	To display the Quick Menu for a specific CICS region, hyperlink from the CICS SYSID field on any of the following views: CREGSYT CREGSYA CREGSYM CREGSYTD CREGSYAD CREGSYMD

Related views

BMC AMI Ops Monitor for CICS 7.5

On this page