VLST

This command lists variable names defined in the BMC AMI Ops Automation pools.

It returns those names in LOCAL variables LINE1 through LINEn and sets IMFNOL to the count of LINEs.

This command supports the use of sysplex variables; see Using-sysplex-variables for more information about restrictions with sysplex variables (such as using wildcard characters and abbreviations).

Command	Parameters
VLST	variableName \| variablePattern [SHARED \| PROFILE \| REXX \| LOCAL]

Parameter	Function	Notes
variableName \| variablePattern	Name or name pattern for specifying variable names to retrieve	Required parameter Specify only one variable name (or variable pattern). The variable name or variable pattern can have a maximum of 32 characters. Example of a variable pattern: (A+B) The following wildcards characters are supported: + (plus sign): matches any one character (asterisk): matches zero to any number of characters You can also generically expressed a variable with an asterisk.
Pool identifier	Pool in which the designated variables reside	The identifier is one of the following pools: SHARED (default pool) See Using-sysplex-variables for more information about sysplex variables PROFILE REXX LOCAL LOCAL variables whose names begin with the characters LINE will not be displayed

Value	Description
0	Command was executed successfully.
8	No variable was found.
12	Variable pool is not available.
16	Sysplex variable name is too long (exceeds 15 characters)

Examples

The following EXEC uses the IMFEXEC VLST command to retrieve all the variables that begin with RETRY and then reports the number of retries. The variable RETRY.termname will contain the number of retries for a terminal.

/* REXX */
/*********************************************************/
/* THIS EXEC WILL PRINT RETRY COUNTS FOR ALL TERMINALS */
/*********************************************************/
"IMFEXEC VLST RETRY* SHARED"
IF IMFCC > 0 THEN EXIT
"IMFEXEC VDCL DUMMY1 LIST(VARNAME)"
"IMFEXEC VDCL DUMMY2 LIST(DATE COUNT)"

/* this is the loop to process the returned data       */
/* the data is in the LOCAL pool                    */

DO N = 1 TO IMFNOL
  "IMFEXEC VGET LINE"N "INTO(DUMMY1) LOCAL"
  "IMFEXEC VGET" VALUE(VARNAME) "INTO(DUMMY2) SHARED"
  END = LENGTH(VARNAME)
  NOD = SUBSTR(VARNAME,7,END-7)
  "IMFEXEC MSG '*TERMINAL:" NOD 'RETRIES: "COUNT"'"
END

"IMFEXEC VDEL RETRY* SHARED"

CLIST example:

PROC 1 EXECNAME
/*********************************************************/
/* THIS EXEC WILL PRINT RETRY COUNTS FOR ALL TERMINALS */
/*********************************************************/
COUNT: -
    IMFEXEC VLST RETRY* SHARED
    SET RC = &IMFCC
    IF &RC > 0 THEN EXIT
    IMFEXEC VDCL DUMMY1 LIST(VARNAME)
    IMFEXEC VDCL DUMMY2 LIST(DATE COUNT)
    SET N = 1
    DO WHILE (&N LE &IMFNOL)
       IMFEXEC VGET LINE&N INTO(DUMMY1) LOCAL
       IMFEXEC VGET &VARNAME INTO(DUMMY2) SHARED
       SET END = &LENGTH(&VARNAME)
       SET NOD = &SUBSTR(7:&END,&VARNAME)
       IMFEXEC MSG '*TERMINAL: &NOD RETRIES: &COUNT'
       SET N = &N + 1
   END
   IMFEXEC VDEL RETRY* SHARED

The following EXEC lists all variable names that are one character long in the SHARED pool. The values associated with those variable names will be written to the Journal.

/* REXX */
"IMFEXEC VLST + SHARED"
"IMFEXEC VDCL DUMMY1 LIST(VARNAME)"

SAY IMFNOL
DO I=1 TO IMFNOL
"IMFEXEC VGET LINE"I" INTO(DUMMY1) LOCAL"
  SAY VARNAME '=' VALUE(VARNAME)
END

EXIT 0

CLIST example:

PROC 0

IMFEXEC VLST + SHARED

    SET RC = &IMFCC
    IF &RC > 0 THEN EXIT
    IMFEXEC VDCL DUMMY1 LIST(VARNAME)
    SET N = 1
    DO WHILE (&N LE &IMFNOL)
       IMFEXEC VGET LINE&N INTO(DUMMY1) LOCAL
       SET LEN = &LENGTH(&VARNAME)
       IMFEXEC MSG '*TERMINAL: &NOD RETRIES: &VARNAME'
       SET N = &N + 1
   END

The following EXEC lists all variable names that are two characters long in the SHARED pool. The values associated with those variable names will be written to the Journal.

/* REXX */
"IMFEXEC VLST ++ SHARED"
"IMFEXEC VDCL DUMMY1 LIST(VARNAME)"

SAY IMFNOL
DO I=1 TO IMFNOL
"IMFEXEC VGET LINE"I" INTO(DUMMY1) LOCAL"
  SAY VARNAME '=' VALUE(VARNAME)
END

EXIT 0

CLIST example:

PROC 0

IMFEXEC VLST ++ SHARED

    SET RC = &IMFCC
    IF &RC > 0 THEN EXIT
    IMFEXEC VDCL DUMMY1 LIST(VARNAME)
    SET N = 1
    DO WHILE (&N LE &IMFNOL)
       IMFEXEC VGET LINE&N INTO(DUMMY1) LOCAL
       SET LEN = &LENGTH(&VARNAME)
       IMFEXEC MSG '*TERMINAL: &NOD RETRIES: &VARNAME'
       SET N = &N + 1
   END

The following EXEC retrieves all the variables that begin with RETRY. The last character could be any character and the variable names with their associated values will be written to the Journal.

/* REXX */
"IMFEXEC VLST RETRY+ SHARED"
"IMFEXEC VDCL DUMMY1 LIST(VARNAME)"

SAY IMFNOL
DO I=1 TO IMFNOL
"IMFEXEC VGET LINE"I" INTO(DUMMY1) LOCAL"
  SAY VARNAME '=' VALUE(VARNAME)
END

EXIT 0

CLIST example:

PROC 0

IMFEXEC VLST RETRY+ SHARED

    SET RC = &IMFCC
    IF &RC > 0 THEN EXIT
    IMFEXEC VDCL DUMMY1 LIST(VARNAME)
    SET N = 1
    DO WHILE (&N LE &IMFNOL)
       IMFEXEC VGET LINE&N INTO(DUMMY1) LOCAL
       SET LEN = &LENGTH(&VARNAME)
       IMFEXEC MSG '*TERMINAL: &NOD RETRIES: &VARNAME'
       SET N = &N + 1
   END

The following EXEC retrieves all the variables that begin with “RETRY”. The last two characters could be any two characters and the variable names with their associated values will be written to the Journal.

/* REXX */
"IMFEXEC VLST RETRY++ SHARED"
"IMFEXEC VDCL DUMMY1 LIST(VARNAME)"

SAY IMFNOL
DO I=1 TO IMFNOL
"IMFEXEC VGET LINE"I" INTO(DUMMY1) LOCAL"
  SAY VARNAME '=' VALUE(VARNAME)
END

EXIT 0

CLIST example:

PROC 0

IMFEXEC VLST RETRY++ SHARED

    SET RC = &IMFCC
    IF &RC > 0 THEN EXIT
    IMFEXEC VDCL DUMMY1 LIST(VARNAME)
    SET N = 1
    DO WHILE (&N LE &IMFNOL)
       IMFEXEC VGET LINE&N INTO(DUMMY1) LOCAL
       SET LEN = &LENGTH(&VARNAME)
       IMFEXEC MSG '*TERMINAL: &NOD RETRIES: &VARNAME'
       SET N = &N + 1
   END

Examples

BMC AMI Ops Automation 8.3.01

On this page