TAPE STATUS/CONTROL application
The TAPE STATUS/CONTROL application reports the status of tape drives on the specified target system, and allows the operator to issue commands to modify that status.
TAPE STATUS Control panels
The data display area shows tape drives and their status.
The information is similar to the output of the MVS Display Unit command. Here, the information is in a scrollable list from which you can select devices with the desired characteristics, using simple commands. Device status is shown in three columns.
COMMAND ===> TGT ===> SYSB
INTERVAL ==> 3 DATE --- YY/MM/DD
STATUS --- INPUT TIME --- 10:34:00
LC CMDS --- (ON)line, (OF)fline, (UNL)oad
LC CUA VOLUME TYPE JOBNAME VOLSTATE ----------- STATUS -----------
___ 480 3400 CWB1TAPE /REMOV ONLINE
___ 481 3400 CWB2TAPE /REMOV ONLINE
___ 482 34055 3400 CIABKUP PRIV/RESVD ALLOCATED
___ 483 20056 3400 QA2BOMT PRIV/RESVD ALLOCATED
___ 484 3400 CMF16 /REMOV ONLINE
___ 485 3400 CMF24 /REMOV ONLINE
___ 486 02003 3400 DLYDCS PRIV/RESVD ALLOCATED
___ 487 100304 3400 CWB1PRNT PRIV/RESVD ALLOCATED
___ 488 34579 3400 TCC2A PRIV/RESVD ALLOCATED
___ 489 37803 3400 TW24AB PRIV/RESVD ALLOCATED
___ 48A 3400 /REMOV OFFLINE NOT RDY
___ 48B 3400 /REMOV OFFLINE NOT RDY
___ 48C 3400 /REMOV OFFLINE NOT RDY
___ 48D 3400 /REMOV OFFLINE NOT RDY
___ 48E 3400 /REMOV OFFLINE NOT RDY
___ 48F 3400 /REMOV OFFLINE NOT RDY
___ 490 3400 /REMOV OFFLINE NOT RDY
___ 491 3400 CWBTPBKP PRIV/RESVD ALLOCATED CHG STAT DDR PNDG
The data display area shows tape drives and their status. The information is similar to the output of the MVS Display Unit command. Here, the information is in a scrollable list from which you can select devices with the desired characteristics, using simple commands. Device status is shown in three columns.
You can use line commands to alter device status just as if they had been issued at the operator's main console. There are two types of line commands: BMC AMI Ops Automation and SYSPROG line commands.
This section contains the following topics: