TARGET PROFILE SELECTION panel
This section describes how to define individual profiles.
Use the TARGET PROFILE SELECTION panel to define individual profiles for up to 23 targets plus a default target.
To create a new profile for an undefined z/OS target, follow these steps:
- Change the TGT system name on the SYSTEM STATUS panel to the target name for which you want to create a profile.
- Enter the primary command TARGETS on the COMMAND line and press Enter.
The following shows an example of the TARGET PROFILE SELECTION panel.
COMMAND ===>
DATE --- YY/MM/DD
TIME --- 15:42:27
Profiles are defined for these Target Systems.
LINE COMMANDS: (S)elect, (D)elete
LC TARGET LC TARGET LC TARGET
___ MNVB ___ -OPEN- ___ -OPEN-
___ SYSB ___ -OPEN- ___ -OPEN-
___ -OPEN- ___ -OPEN- ___ -OPEN-
___ -OPEN- ___ -OPEN- ___ -OPEN-
___ -OPEN- ___ -OPEN- ___ -OPEN-
___ -OPEN- ___ -OPEN- ___ -OPEN-
___ -OPEN- ___ -OPEN- ___ XXXX
___ -OPEN- ___ -OPEN- ___ DEFAULT
Press END to save
You can enter the following commands in the LC column of this display:
Line command | Description |
|---|---|
S | Use S (select) to select an -OPEN- slot for use by the z/OS target system (shown in the TGT field of the System Status application |
D | Use D (delete) to make the indicated system profile slot available for use and remove the target from the profile |
After you assign a slot for a target, press PF3 to display the SYSTEM STATUS PROFILE screen. You can now modify the SYSTEM STATUS PROFILE panel to create your profile.
Related topic