Configuring TCP/IP settings

When you install BMC Performance Predictor for Mainframes, you need to choose the port number or accept the default setting of 2052 for the host and the local ports. Your selections must be within the range of 1025 to 5000. These port numbers do not need to match.

 The TCP/IP Settings dialog box appears as shown in the following figure:

worddav20dbd5bcfb3418da02a25cdfd543a5a3.png

Related topic

Customizing-after-installation

This dialog box shows the default settings for the Host and Local ports. If you want to change either setting, do so in this dialog box. However, you do not need to change the settings unless you have a conflict with another product.

Important

You can change the Local Port Number if you want. The Host Port Number must be the same number specified during installation of Universal Information Exchange. You should only change the Host Port Number on the PC after the mainframe systems programmer has changed the Host Port Number in the E2COMM started task's JCL and restarted E2COMM.

For more information about installing the BMC Performance Predictor for Mainframes product, see BMC Performance Predictor for Mainframes.

 

Tip: For faster searching, add an asterisk to the end of your partial query. Example: cert*