ThruPut Manager installation checklist
The installation process consists of the following phases, and provides an overview of the steps within a phase that are applicable to each edition of ThruPut Manager:
Phase 1: Install the
ThruPut Manager
Software
You download the software from the ftp website identified in your order and establish it in your environment.Phase 2: Configure
ThruPut Manager
You establishe the JES2 parms, sets up the ThruPut Manager Started Task, and allocates files. If you are an existing customer these might already be completed and sufficient based on your previous installations and upgrades.
Phase 3: Review
ThruPut Manager
Interfaces
ThruPut Manager might have introduced changes that interact with other software products, for example, messages for automated operators. ThruPut Manager may interact with other system software, and this phase is where you review these interactions.Phase 4: Activate
ThruPut Manager
You start ThruPut Manager and verify that it is behaving as expected.
- Phase 5: Continue the Installation Process for AE+
ThruPut Manager AE+ requires tailoring beyond the steps in this manual and before the implementation process using the relevant dialog. For more information, see the ThruPut Manager AE+ PCS-installation-companion-guide.
Use the Installation Checklist to identify the steps relevant to your situation. Subsequent chapters provide the details for each phase. This space is intended to install the TM software. For more information about activating AE in your installation, see the AE Usage-guide.
Phase 1: Install the ThruPut Manager Software
Use either Step 1A or Step 1B.
- Step 1A is for users:
- Installing ThruPut Manager for the first time
- Replacing their ThruPut Manager environment with a new maintenance level
- Step 1B is for users:
- Updating (via SMP/E) an existing ThruPut Manager environment
Step | INSTALL Dataset Member | Notes | TM AE | TM AE+ | TM SE | |
|---|---|---|---|---|---|---|
Pre-Step 1: Install Enterprise Common Components (ECC) | ||||||
q | Install ECC according to the Enterprise Common Components Installation and Customization Guide | • For the 18.02 TMT7110-TMT7112 releases, software/key NOT required for TM to function. • For the 18.02 TMT7113 release and above, software key is required. |
|
|
| |
Step 1A. Use QUIKLOAD Technique (Step 1A and 1B are mutually exclusive) | ||||||
q | 1A.1. Restore the ThruPut Manager Datasets | • See the shipment email for the link to the JCL to download files. • DTMLINK must be an APF authorized library and in the LiNKLST. |
|
|
| |
q | 1A.2. Modify the ThruPut Manager SMP/E JCL PROC | TMSMPE |
|
|
| |
q | 1A.3. Restore SMP/E Environment | I$FSMPE |
|
|
| |
q | 1A.4. Alter SMP/E Definitions/Settings | I$ZONE |
|
|
| |
q | 1A.5. Reassemble/Link ThruPut Manager Source Stubs | I$JESLNK | Run each time the JES2 level changes. |
|
|
|
q | 1A.6. Merge SMP/E Environment (optional) | I$ZNEIMP | Optional | Opt. | Opt. | Opt. |
Step 1B. Use SMP/E Technique (Step 1A and 1B are mutually exclusive) | ||||||
q | 1B.1. Download the ThruPut Manager Installation Files | See the shipment email for the link to the JCL to download files. |
|
|
| |
q | 1B.2. ACCEPT Previous Maintenance | I$SMP1 |
|
|
| |
q | 1B.3. Allocate PDSE | I$DTMLNK | Applicable for TMT7105 level and above. |
|
|
|
q | 1B.4. Receive ThruPut Manager Upgrade | I$SMP2 |
|
|
| |
q | 1B.5. APPLY ThruPut Manager Upgrade | I$SMP3 |
|
|
| |
q | 1B.6. APPLY APARs | I$SMP3 |
|
|
| |
q | 1B.7. Reassemble/Link ThruPut Manager Source Stubs | I$JESLNK |
|
|
| |
Phase 2: Configure ThruPut Manager
Complete this phase if you are installing:
• The product for the first time
• An (edition of) the product on a system for the first time
This phase may not be necessary if you are upgrading to a new maintenance level. Consult the Release Details for more information.
Step | INSTALL Dataset Member | Notes | TM AE | TM AE+ | TM SE | |
|---|---|---|---|---|---|---|
Step 2. Add the JES2 Interfaces | ||||||
q | 2.1. JES2 Load Statements | JESPARM |
|
|
| |
q | 2.2. JES2 Exit Statements | JESPARM |
|
|
| |
q | 2.3. TMPARM Statement | JESPARM |
|
|
| |
q | 2.4. TMPARM Defaults | JESPARM |
|
|
| |
Step 3. Identify the ThruPut Manager Subsystem | ||||||
q | 3.1. Update MVS Member IEFSSNxx |
|
|
| ||
Step 4A Allocate and Format ThruPut Manager Required Files | ||||||
q | 4A.1. Control File (CF) | I$ALLOC |
|
|
| |
q | 4A.2. Volume Information File (VIF) | I$ALLOC |
|
|
| |
q | 4A.3. Contention Management Facility File (CMF) | I$ALLOC | Required to record DCS contention | Opt. | Opt. | Opt. |
Step 4B Allocate ThruPut Manger Additional Files | ||||||
q | 4B.1 Automation File (AF) - TM AE and TM AE+ ONLY | Allocated in Automation Services Dialog. |
|
| ||
q | 4B.2 Battle Plan File (BPF) - TM AE+ ONLY | I$ALLOC2 | See AE+ Installation Companion Guide. |
| ||
q | 4B.3 Experience Collection File (EXPC) - TM AE+ ONLY | I$ALLOC2 | See AE+ Installation Companion Guide. |
| ||
q | 4B.4 Experience File (EXPC) - TM AE+ ONLY | I$ALLOC2 | 2 files |
| ||
q | 4B.5 Application Management DB (AMD) - TM AE+ ONLY | See AE+ Installation Companion Guide. |
| |||
Step 5. Tailor the ThruPut Manager Started Task (TMSS) | ||||||
q | 5.1. Prepare for TMSS Activation |
|
|
| ||
q | 5.2. TMSS Initialization Statements | TMSS00 | Verify DCS SET XCF(YES) is coded in the TMSS init statements. See Step 7.4.2 for more detail. |
|
|
|
q | 5.3. TMSS Startup Considerations |
|
|
| ||
Phase 3: Review ThruPut Manager Interfaces
All users complete this phase. If you are also upgrading from Version 6, review Technical Bulletin TM140505 for version to version changes.
Step | INSTALL Dataset Member | Notes | TM AE | TM AE+ | TM SE | |
|---|---|---|---|---|---|---|
Step 6. Accommodate Changes Introduced with this Package (*can be performed after IPL) | ||||||
q | 6.1 Accommodate changes | See Technical Bulletin TM140505. |
|
|
| |
Step 7 7. Verify ThruPut Manager and OEM Interfaces (*can be performed after IPL) | ||||||
q | 7.1. Implementing the ISPF Interfaces TMISPF AND UDF |
|
|
| ||
q | 7.2. Implement the DFSMShsm Interface - TM AE and TM AE+ ONLY |
|
| |||
q | 7.3. OEM Considerations |
|
|
| ||
q | 7.3.1. JES2 | UCLINU |
|
|
| |
q | 7.3.2. XCF |
|
|
| ||
q | 7.3.3. StorageTek/HSC |
|
|
| ||
q | 7.3.4 CA 7 | I$CA7 |
|
|
| |
q | 7.3.5. CA-JMR - TM AE and TM AE+ ONLY |
|
| |||
q | 7.3.6. CA-Deliver - TM AE and TM AE+ ONLY |
|
| |||
q | 7.4. Implementing the Software Access Control (SAC) Interfaces |
|
|
| ||
http://www.mvssol.com/techupdt/TM140505.pdf
Phase 4: Activate ThruPut Manager
All users complete this phase.
Step | INSTALL Dataset Member | Notes | TM AE | TM AE+ | TM SE | |
|---|---|---|---|---|---|---|
Step 8. IPL | ||||||
q | 8.1. Prepare to IPL |
|
|
| ||
q | 8.2. Perform an IPL and a JES2 warm start. | ThruPut Manager AE+ requires additional tailoring of the CA7 interface, therefore postponing IPL may be desired. |
|
|
| |
Step 9. Start the ThruPut Manager Started Task | ||||||
q | 9.1. Start TM Started Task and Review DTM Messages | Review startup messages for errors. |
|
|
| |
q | 9.2 Define ThruPut Manager Job Classes | Use TM CLASS ADD/SET/DEL. |
|
|
| |
q | 9.3. Issue $MJ,START Command | • No JES2 job selection until this command has been issued. • Minimum of $MJ START required for initial implementation. |
|
|
| |
q | 9.4 Verify ThruPut Manager is Functioning |
|
|
| ||
For more information about AE+ additional setup, see the ThruPut Manager AE+ Installation Companion Guide.
This completes the ThruPut Manager installation process.