Example 11 — Using a DDLIN data set
Message 50041I indicates the status of zIIP processing. For this example, the ZIIP installation option is ENABLED, but an SUF ( also known as XBM ) subsystem was not specified. UNLOAD PLUS automatically located an available SUF ( also known as XBM ) subsystem to provide zIIP processing.
The following table describes the key command options for this job:
Command options used in JCL | Description |
|---|---|
INFILE BMCCPY | Unloads data from a sequential data set rather than a Db2 table space data set |
UNLOADDN SYSREC ACTIVE NO | Disables dynamic allocation for the primary unload data set, overriding the default in the installation options module |
OBID | Specifies the OBID that will be associated with the selected table This option is valid only when using the INFILE ddname option. Additionally, you must use this option when the following conditions exist:
In this example, the OBID for table ADU.ADU11TB1 is specified in the UNLOAD command and the OBID for table ADU.ADU11TB2 is specified in the DDLIN file. |
SELECT | Specifies the column to unload |
FROM | Names the table to unload |
The following figure shows the JCL for example 11:
// JOBCARD
//**********************ADUEX11B ***********************************
//******************************************************************
//********* Using a DDLIN data set ************************
//*This example uses the OBID option and the INFILE option with a *
//*file that contains DDL. *
//******************************************************************
//* Replace "DB2SYS" by your DB2 subsystem name. *
//* Use your DB2 product install libraries for STEPLIBS ; *
//* PRODUCT.LIBRARIES *
//* DB2.DSNEXIT *
//* DB2.DSNLOAD *
//*********************************************************************
//UNLOAD11 EXEC PGM=ADUUMAIN,REGION=0M,
// PARM=(DB2SYS,'ADUEX11','NEW ',,'MSGLEVEL(1)')
//STEPLIB DD DISP=SHR,DSN=PRODUCT.LIBRARIES
// DD DSN=DB2.DSNEXIT,DISP=SHR
// DD DSN=DB2.DSNLOAD,DISP=SHR
//SYSIN DD *
UNLOAD INFILE BMCCPY
UNLOADDN SYSREC ACTIVE NO
SELECT 'ADU11TB1', * FROM ADU.ADU11TB1 {OBID 3}
SELECT 'ADU11TB2', * FROM ADU.ADU11TB2
/*
//DDLIN DD DSN=ADU.INPUT.EXAMPLES.SYSREC(ADUXDDL1),DISP=SHR
// DD DSN=ADU.INPUT.EXAMPLES.SYSREC(ADUXDDL2),DISP=SHR
//BMCCPY01 DD DSN=ADU.EXAMPL11.DSN1COPY.ADU11TSA,DISP=SHR
//BMCCPY02 DD DSN=ADU.EXAMPL11.DSN1COPY.ADU11TSB,DISP=SHR
//SYSCNTL DD DSN=ADU.EXAMPL11.SYSCNTL,DISP=(NEW,CATLG),
// UNIT=SYSDA,SPACE=(CYL,(3,1),RLSE)
//SYSREC01 DD DSN=ADU.EXAMPL11.SYSREC01,DISP=(NEW,CATLG),
// UNIT=SYSDA,SPACE=(CYL,(3,1),RLSE)
//SYSREC02 DD DSN=ADU.EXAMPL11.SYSREC02,DISP=(NEW,CATLG),
// UNIT=SYSDA,SPACE=(CYL,(3,1),RLSE)
//SYSPRINT DD DSN=ADU.EXAMPL11.SYSPRINT,DISP=(NEW,CATLG),
// UNIT=SYSDA,SPACE=(CYL,(3,1),RLSE)
//**********************ADUEX11B ***********************************
//******************************************************************
//********* Using a DDLIN data set ************************
//*This example uses the OBID option and the INFILE option with a *
//*file that contains DDL. *
//******************************************************************
//* Replace "DB2SYS" by your DB2 subsystem name. *
//* Use your DB2 product install libraries for STEPLIBS ; *
//* PRODUCT.LIBRARIES *
//* DB2.DSNEXIT *
//* DB2.DSNLOAD *
//*********************************************************************
//UNLOAD11 EXEC PGM=ADUUMAIN,REGION=0M,
// PARM=(DB2SYS,'ADUEX11','NEW ',,'MSGLEVEL(1)')
//STEPLIB DD DISP=SHR,DSN=PRODUCT.LIBRARIES
// DD DSN=DB2.DSNEXIT,DISP=SHR
// DD DSN=DB2.DSNLOAD,DISP=SHR
//SYSIN DD *
UNLOAD INFILE BMCCPY
UNLOADDN SYSREC ACTIVE NO
SELECT 'ADU11TB1', * FROM ADU.ADU11TB1 {OBID 3}
SELECT 'ADU11TB2', * FROM ADU.ADU11TB2
/*
//DDLIN DD DSN=ADU.INPUT.EXAMPLES.SYSREC(ADUXDDL1),DISP=SHR
// DD DSN=ADU.INPUT.EXAMPLES.SYSREC(ADUXDDL2),DISP=SHR
//BMCCPY01 DD DSN=ADU.EXAMPL11.DSN1COPY.ADU11TSA,DISP=SHR
//BMCCPY02 DD DSN=ADU.EXAMPL11.DSN1COPY.ADU11TSB,DISP=SHR
//SYSCNTL DD DSN=ADU.EXAMPL11.SYSCNTL,DISP=(NEW,CATLG),
// UNIT=SYSDA,SPACE=(CYL,(3,1),RLSE)
//SYSREC01 DD DSN=ADU.EXAMPL11.SYSREC01,DISP=(NEW,CATLG),
// UNIT=SYSDA,SPACE=(CYL,(3,1),RLSE)
//SYSREC02 DD DSN=ADU.EXAMPL11.SYSREC02,DISP=(NEW,CATLG),
// UNIT=SYSDA,SPACE=(CYL,(3,1),RLSE)
//SYSPRINT DD DSN=ADU.EXAMPL11.SYSPRINT,DISP=(NEW,CATLG),
// UNIT=SYSDA,SPACE=(CYL,(3,1),RLSE)
The following figure shows the DDLIN data set that example 11 uses:
// JOBCARD
//**********************ADUEX11A ***********************************
//******************************************************************
//********* Using a DDLIN data set ************************
//*This example uses the OBID option and the INFILE option with a *
//*file that contains DDL. *
//******************************************************************
//* Replace "DB2SYS" by your DB2 subsystem name. *
//* Use your DB2 product install libraries for STEPLIBS : *
//* PRODUCT.LIBRARIES *
//* DB2.DSNEXIT *
//* DB2.DSNLOAD *
//******************************************************************
//CREATEDB EXEC PGM=IKJEFT01,DYNAMNBR=20
//STEPLIB DD DISP=SHR,DSN=DB2.DSNEXIT
// DD DISP=SHR,DSN=DB2.DSNLOAD
//SYSTSPRT DD SYSOUT=*
//SYSPRINT DD SYSOUT=*
//SYSPUNCH DD SYSOUT=*
//SYSTSIN DD *
DSN SYSTEM(DB2SYS)
RUN PROGRAM (DSNTEP2)
//SYSIN DD *
DROP DATABASE ADU11DB;
COMMIT
;
CREATE DATABASE ADU11DB
STOGROUP SYSDEFLT;
COMMIT
;
CREATE TABLESPACE ADU11TSA IN ADU11DB
USING STOGROUP SYSDEFLT
FREEPAGE 10
PCTFREE 10
BUFFERPOOL BP32K
LOCKSIZE PAGE
CLOSE YES
SEGSIZE 4 ;
COMMIT
;
CREATE TABLE ADU.ADU11TB1
(COL1_INTEGER INTEGER NOT NULL WITH DEFAULT
,COL2_CHAR_20 CHARACTER(20) NOT NULL WITH DEFAULT
,COL3_CHAR_20 CHARACTER(20) NOT NULL WITH DEFAULT
,COL4_CHAR_100 CHARACTER(100) NOT NULL WITH DEFAULT
,COL5_CHAR_100 CHARACTER(100) NOT NULL WITH DEFAULT
,COL6_INTEGER INTEGER NOT NULL WITH DEFAULT
,COL7_INTEGER INTEGER NOT NULL WITH DEFAULT
)
IN ADU11DB.ADU11TSA
AUDIT NONE ;
COMMIT
;
CREATE TABLESPACE ADU11TSB IN ADU11DB
USING STOGROUP SYSDEFLT
FREEPAGE 10
PCTFREE 10
LOCKSIZE PAGE
CLOSE YES
SEGSIZE 4 ;
COMMIT
;
CREATE TABLE ADU.ADU11TB2
(COL1_INTEGER INTEGER NOT NULL WITH DEFAULT
,COL2_CHAR_100 CHARACTER(100) NOT NULL WITH DEFAULT
,COL3_CHAR_100 CHARACTER(100) NOT NULL WITH DEFAULT
,COL4_VCHAR_250 VARCHAR(250) NOT NULL WITH DEFAULT
,COL5_VCHAR_250 VARCHAR(250) NOT NULL WITH DEFAULT
,COL6_TIMESTAMP TIMESTAMP NOT NULL WITH DEFAULT
)
OBID 1202
IN ADU11DB.ADU11TSB
AUDIT NONE ;
COMMIT
;
//*
//**********************ADUEX11A ***********************************
//******************************************************************
//********* Using a DDLIN data set ************************
//*This example uses the OBID option and the INFILE option with a *
//*file that contains DDL. *
//******************************************************************
//* Replace "DB2SYS" by your DB2 subsystem name. *
//* Use your DB2 product install libraries for STEPLIBS : *
//* PRODUCT.LIBRARIES *
//* DB2.DSNEXIT *
//* DB2.DSNLOAD *
//******************************************************************
//CREATEDB EXEC PGM=IKJEFT01,DYNAMNBR=20
//STEPLIB DD DISP=SHR,DSN=DB2.DSNEXIT
// DD DISP=SHR,DSN=DB2.DSNLOAD
//SYSTSPRT DD SYSOUT=*
//SYSPRINT DD SYSOUT=*
//SYSPUNCH DD SYSOUT=*
//SYSTSIN DD *
DSN SYSTEM(DB2SYS)
RUN PROGRAM (DSNTEP2)
//SYSIN DD *
DROP DATABASE ADU11DB;
COMMIT
;
CREATE DATABASE ADU11DB
STOGROUP SYSDEFLT;
COMMIT
;
CREATE TABLESPACE ADU11TSA IN ADU11DB
USING STOGROUP SYSDEFLT
FREEPAGE 10
PCTFREE 10
BUFFERPOOL BP32K
LOCKSIZE PAGE
CLOSE YES
SEGSIZE 4 ;
COMMIT
;
CREATE TABLE ADU.ADU11TB1
(COL1_INTEGER INTEGER NOT NULL WITH DEFAULT
,COL2_CHAR_20 CHARACTER(20) NOT NULL WITH DEFAULT
,COL3_CHAR_20 CHARACTER(20) NOT NULL WITH DEFAULT
,COL4_CHAR_100 CHARACTER(100) NOT NULL WITH DEFAULT
,COL5_CHAR_100 CHARACTER(100) NOT NULL WITH DEFAULT
,COL6_INTEGER INTEGER NOT NULL WITH DEFAULT
,COL7_INTEGER INTEGER NOT NULL WITH DEFAULT
)
IN ADU11DB.ADU11TSA
AUDIT NONE ;
COMMIT
;
CREATE TABLESPACE ADU11TSB IN ADU11DB
USING STOGROUP SYSDEFLT
FREEPAGE 10
PCTFREE 10
LOCKSIZE PAGE
CLOSE YES
SEGSIZE 4 ;
COMMIT
;
CREATE TABLE ADU.ADU11TB2
(COL1_INTEGER INTEGER NOT NULL WITH DEFAULT
,COL2_CHAR_100 CHARACTER(100) NOT NULL WITH DEFAULT
,COL3_CHAR_100 CHARACTER(100) NOT NULL WITH DEFAULT
,COL4_VCHAR_250 VARCHAR(250) NOT NULL WITH DEFAULT
,COL5_VCHAR_250 VARCHAR(250) NOT NULL WITH DEFAULT
,COL6_TIMESTAMP TIMESTAMP NOT NULL WITH DEFAULT
)
OBID 1202
IN ADU11DB.ADU11TSB
AUDIT NONE ;
COMMIT
;
//*
SYSPRINT for example 11
The following figure shows the SYSPRINT for example 11:
1 ***** B M C U N L O A D P L U S F O R D B 2 V13R1.00 *****
(C) COPYRIGHT 1991 - 2022 BMC SOFTWARE, INC.
-BMC50001I UTILITY EXECUTION STARTING 1/25/2022 8:34:30 ...
BMC50002I UTILITY ID = 'ADUXM11'. DB2 SUBSYSTEM ID = 'DEMO'. OPTION MODULE = 'ADU$OPTS'.
BMC50471I z/OS 2.4.0,PID=HBB77C0,DFSMS FOR Z/OS=2.4.0,DB2=13.1.501
BMC50471I REGION=0M,BELOW 16M=8.6M,ABOVE 16M=1,005.6M,IEFUSI=NO,CPUs=7,GPs=5,zIIPs=2
BMC50471I MEMLIMIT=15.9E,AVAILABLE=15.9E,MEMLIMIT SET BY:REGION=0
BMC50471I SMFID=DB2B,JOBID=J0940530,JOB=ADUEX11,STEP=UNLOAD11,CPU=8561-615 (z15)/1.71,72.0G
0
BMC50471I UNLOAD PLUS FOR DB2--V13.01.00 BASE
BMC50471I NO MAINTENANCE TO REPORT
BMC50471I DB2 UTILITIES COMMON CODE--V13.01.00 BASE
BMC50471I NO MAINTENANCE TO REPORT
BMC50471I SOLUTION COMMON CODE--V13.01.00 BASE
BMC50471I MAINT: BPJ1541 BPJ1713 BPJ2211
BMC50471I BMCSORT ENGINE--V02.04.01
BMC50471I MAINT: BPJ0691 BPJ0718 BPJ0881 BPJ0922 BPJ0996 BPJ1164 BPJ1309 BPJ1386 BPJ1497 BPJ1594 BPJ1724 BPJ1809
BMC50471I BPJ1833 BPJ1891 BPJ1905 BPJ2109 BPJ2232 BPJ2297
BMC50471I BMC STATS API--V13.01.00 BASE
BMC50471I NO MAINTENANCE TO REPORT
BMC50471I EXTENDED BUFFER MANAGER--V06.02.01
BMC50471I MAINT: BPE0443 BPE0445 BPE0447 BPE0449 BPE0450 BPE0451 BPE0452 BPE0455 BPE0456 BPE0457 BPE0460 BPE0463
BMC50471I BPE0467 BPE0468 BPE0469 BPE0473 BPE0474 BPE0475 BPE0479 BPE0480 BPE0482 BPE0487 BPE0488 BPE0489
BMC50471I BPE0493 BPE0497 BPE0498 BPE0501 BPE0503 BPE0507 BPE0512 BPE0513 BPE0517 BPE0518 BPE0519 BPE0523
BMC50471I BPE0524 BPE0527 BPE0528 BPE0530 BPE0531 BPE0534 BPE0535 BPE0540 BPE0541 BPE0542 BPE0545 BPE0549
BMC50471I BPE0551 BPE0552 BPE0555 BPE0557 BPE0560
0
BMC50471I ANALYZE=(DB2STATS,NOLIMIT) FORCE=NONE SORTNUM=32
BMC50471I CENTURY=(1950,2049) HISTORY=YES SQLDELAY=3
BMC50471I CHANGE_CONSISTENT=NO IBUFFS=25 SQLRETRY=100
BMC50471I CHANGE_QUIESCE=NO INLINE=NO SSREPORT=REPORT_SWITCH
BMC50471I CMAX=16 LOADDECP=NO TAPEDISP=DELETE
BMC50471I CMRATIO=50 LOCKROW=YES TASKMAX=200%
BMC50471I CONSTRULES=BMC MAXP=5 UBUFFS=25
BMC50471I CURRENTDEGREE=NONE MSGLEVEL=1 UNLDMAX=200%
BMC50471I DELFILES=NO NULLCHAR=X'6F' UNLOADDN_ACTIVE=(NO,NO)
BMC50471I DRNDELAY=3 NULLTYPE=T1 UNLOADDN=(SYSREC,SYSRED)
BMC50471I DRNRETRY=10 OPNDB2ID=YES USELRECL=NO
BMC50471I DRNWAIT=UTIL PLAN=ADU1310T UXSTATE=SUP
BMC50471I DSPLOCKS=NONE RECFM=AUTO WORKUNIT=SYSALLDA
BMC50471I EXCLDUMP=(X37,X22,X06) ROWSETSZ=100 XBMID=XBMDB2V
BMC50471I FILEREFDN=SYSREF SDUMP=YES ZIIP=ENABLED
BMC50471I FILL=NO SHRLEVEL=REFERENCE ZONEDDECOVP=(C,D)
BMC50471I FORCE_AT=(START,3) SMAX=16
BMC50471I FORCE_RPT=NO SMCORE=(0K,0K)
0
0
BMC50471I TAPES=NONE
0
BMC50470I OUTPUT = SYSREC SYSRED SYSREF
BMC50470I UNIT = SYSALLDA SYSALLDA SYSALLDA
BMC50470I VOLCNT = 25 25 25
BMC50470I GDGLIMIT = 5 5 5
BMC50470I GDGEMPTY = NO NO NO
BMC50470I GDGSCRAT = NO NO NO
BMC50470I STORCLAS = NONE NONE NONE
BMC50470I DATACLAS = NONE NONE NONE
BMC50470I MGMTCLAS = NONE NONE NONE
BMC50470I UNITCNT = 0 0 0
BMC50470I SPACE = CYL CYL CYL
BMC50470I PCTPRIM = AUTO AUTO AUTO
BMC50470I MAXPRIM = 0 0 0
BMC50470I MAXSECD = 0 0 0
BMC50470I FILESZPCT 100 100 100
BMC50470I NBRSECD = AUTO AUTO AUTO
BMC50470I DISKRETN = NONE NONE NONE
BMC50470I DISKEXPD = NONE NONE NONE
BMC50470I RETPD = NONE NONE NONE
BMC50470I EXPDT = 99000 99000 99000
BMC50470I TRTCH = NONE NONE NONE
BMC50470I DSNTYPE = NONE NONE PDS
BMC50483I SYSREC VOLUMES=NONE
BMC50483I SYSRED VOLUMES=NONE
BMC50483I SYSREF VOLUMES=NONE
0
BMC50483I SYSREC DSNAME=&USERID.&TYPE.S&SELNUM
BMC50483I SYSRED DSNAME=&USERID.&TYPE.S&SELNUM
BMC50483I SYSREF DSNAME=&USERID.&TYPE.S&SELNUM.P&POSNUM
0
BMC50471I DB2 DSNHDECP MODULE SETTINGS:
BMC50471I VERSION = 1310
BMC50471I SUBSYSTEM DEFAULT = DEMO
BMC50471I CHARACTER SET = ALPHANUM
BMC50471I DATE FORMAT = USA
BMC50471I TIME FORMAT = USA
BMC50471I LOCAL DATE LENGTH = 0
BMC50471I LOCAL TIME LENGTH = 0
BMC50471I DECIMAL POINT = PERIOD
BMC50471I DECIMAL ARITHMETIC = 15
BMC50471I DELIMITER = DEFAULT
BMC50471I SQL DELIMITER = DEFAULT
BMC50471I ENCODING SCHEME = EBCDIC
BMC50471I APPL. ENCODING SCHEME = EBCDIC
BMC50471I MIXED = NO
BMC50471I EBCDIC CCSID = (37,65534,65534)
BMC50471I ASCII CCSID = (819,65534,65534)
BMC50471I UNICODE CCSID = (367,1208,1200)
BMC50471I IMPLICIT TIME ZONE = CURRENT (-06:00)
BMC50658I DB2 CURRENT FUNCTION LEVEL IS V13R1M501
BMC50659I DB2 CATALOG LEVEL IS V13R1M501
BMC50660I DB2 HIGHEST ACTIVATED FUNCTION LEVEL IS V13R1M501
BMC50661I DB2 CODE LEVEL IS V13R1M501
BMC50471I BMC_BMCUTIL ='BMCUTIL.CMN_BMCUTIL'
BMC50471I BMC_BMCSYNC ='BMCUTIL.CMN_BMCSYNC'
BMC50471I BMC_BMCHIST ='BMCUTIL.CMN_BMCHIST'
BMC50471I BMC_BMCXCOPY ='BMCUTIL.CMN_BMCXCOPY'
BMC50471I BMC_BMCSMARTSWITCH='BMCUTIL.CMN_BMCSWITCH'
BMC50471I BMC_BMCSSTRACKING ='BMCUTIL.CMN_BMCSSTRACK'
0
0
BMC50102I UNLOAD INFILE BMCCPY
BMC50102I UNLOADDN SYSREC ACTIVE NO
BMC50102I SELECT 'ADU11TB1', * FROM ADU.ADU11TB1 {OBID 3}
BMC50102I SELECT 'ADU11TB2', * FROM ADU.ADU11TB2
BMC51654I DIRECT YES IN EFFECT
0
BMC50004I UTILINIT PHASE COMPLETE. ELAPSED TIME = 00:00:00
BMC54000I SMARTSWITCH NOT SUPPORTED - NO BMC AMI UTILITIES VERSION FOUND
BMC54003I SMARTSWITCH RULE: FORCE_NO_SWITCH COMMENT: SMARTSWITCH NOT ACTIVATED, TABLE/ALIAS DOES NOT EXIST
BMC50199I UNLOAD PLUS PROCESSING CONTINUES
BMC51689I ESTIMATED ROWS FOR SELECT 1 IS 0
BMC51689I ESTIMATED ROWS FOR SELECT 2 IS 0
BMC51639I FOR DDNAME 'SYSREC01' DSN=ADU.EXAMPL11.SYSREC01,DCB=(RECFM=FB,BLKSIZE=27820,LRECL=260)
BMC51639I FOR DDNAME 'SYSREC02' DSN=ADU.EXAMPL11.SYSREC02,DCB=(RECFM=VB,BLKSIZE=27998,LRECL=746)
BMC50041I 0: ZIIP ENABLED (0) USING XBM SUBSYSTEM XV2B
BMC50474I BELOW 16M = 8440K, ABOVE 16M = 1022788K, CPUS = 5
BMC51701I MAX TASKS = 2, MAX PARTITIONS PER TASK = 1, SORTWKS PER TASK = 0, MAX OPEN PARTITIONS PER TASK = 1
BMC50476I DDNAME = BMCCPY02, I/OS = 3, I/O WAITS = 1, RDB LOCK WAITS = 0
BMC50477I 2: PARTITION = 1, ROWS/KEYS = 2375, I/O WAITS = 0 ,DDNAME = BMCCPY02
BMC50478I 2: RDB LOCK WAITS = 0
BMC50476I DDNAME = BMCCPY01, I/OS = 6, I/O WAITS = 5, RDB LOCK WAITS = 0
BMC50477I 1: PARTITION = 1, ROWS/KEYS = 5000, I/O WAITS = 0 ,DDNAME = BMCCPY01
BMC50478I 1: RDB LOCK WAITS = 0
BMC50476I DDNAME = SYSREC01, I/OS = 4, I/O WAITS = 1, RDB LOCK WAITS = 0
BMC50476I DDNAME = SYSREC02, I/OS = 2, I/O WAITS = 1, RDB LOCK WAITS = 0
BMC51671I UNLOAD STATISTICS: 5000 ROWS PROCESSED FROM PARTITION 1
BMC51686I UNLOADING OF DATASET 'ADU.EXAMPL11.DSN1COPY.ADU11TSA' READ 65 PAGES
BMC51672I UNLOAD STATISTICS: 5000 ROWS PROCESSED FROM SPACE 'ADU11DB.ADU11TSA', 0 NOT SELECTED, 0 DISCARDED
BMC51671I UNLOAD STATISTICS: 2375 ROWS PROCESSED FROM PARTITION 1
BMC51686I UNLOADING OF DATASET 'ADU.EXAMPL11.DSN1COPY.ADU11TSB' READ 232 PAGES
BMC51672I UNLOAD STATISTICS: 2375 ROWS PROCESSED FROM SPACE 'ADU11DB.ADU11TSB', 0 NOT SELECTED, 0 DISCARDED
BMC51674I UNLOAD STATISTICS: 5000 RECORDS WRITTEN TO DDNAME 'SYSREC01'
BMC51674I UNLOAD STATISTICS: 2375 RECORDS WRITTEN TO DDNAME 'SYSREC02'
BMC51675I UNLOAD STATISTICS: 0 RECORDS DISCARDED DUE TO ERRORS
BMC50041I 0: ZIIP NOT ENABLED (0) USING XBM SUBSYSTEM XV2B
BMC50004I UNLOAD PHASE COMPLETE. ELAPSED TIME = 00:00:00
BMC51639I FOR DDNAME 'SYSCNTL' DSN=ADU.EXAMPL11.SYSCNTL,DCB=(RECFM=FB,BLKSIZE=3120,LRECL=80)
BMC51801I LOAD TABLE STATEMENTS WRITTEN TO DDNAME 'SYSCNTL'
0
BMC51810I LOAD DATA INDDN SYSREC01
BMC51940I EBCDIC CCSID(37,65534,65534)
BMC51811I INTO TABLE
BMC51809I ADU.ADU11TB1
BMC51815I ($CONST01 POSITION(1:8) CHAR (8)
BMC51813I ,COL1_INTEGER POSITION(9:12) INTEGER
BMC51815I ,COL2_CHAR_20 POSITION(13:32) CHAR (20)
BMC51815I ,COL3_CHAR_20 POSITION(33:52) CHAR (20)
BMC51815I ,COL4_CHAR_100 POSITION(53:152) CHAR (100)
BMC51815I ,COL5_CHAR_100 POSITION(153:252) CHAR (100)
BMC51813I ,COL6_INTEGER POSITION(253:256) INTEGER
BMC51813I ,COL7_INTEGER POSITION(257:260) INTEGER
BMC51809I )
BMC51810I LOAD DATA INDDN SYSREC02
BMC51940I EBCDIC CCSID(37,65534,65534)
BMC51811I INTO TABLE
BMC51809I ADU.ADU11TB2
BMC51815I ($CONST01 POSITION(1:8) CHAR (8)
BMC51813I ,COL1_INTEGER POSITION(9:12) INTEGER
BMC51815I ,COL2_CHAR_100 POSITION(13:112) CHAR (100)
BMC51815I ,COL3_CHAR_100 POSITION(113:212) CHAR (100)
BMC51813I ,COL4_VCHAR_250 POSITION(213:*) VARCHAR
BMC51813I ,COL5_VCHAR_250 POSITION(*:*) VARCHAR
BMC51815I ,COL6_TIMESTAMP POSITION(*:*+25) TIMESTAMP EXTERNAL(26)
BMC51809I )
0
BMC50476I DDNAME = SYSCNTL, I/OS = 1, I/O WAITS = 1, RDB LOCK WAITS = 0
0BMC50006I UTILITY EXECUTION COMPLETE, RETURN CODE = 0
(C) COPYRIGHT 1991 - 2022 BMC SOFTWARE, INC.
-BMC50001I UTILITY EXECUTION STARTING 1/25/2022 8:34:30 ...
BMC50002I UTILITY ID = 'ADUXM11'. DB2 SUBSYSTEM ID = 'DEMO'. OPTION MODULE = 'ADU$OPTS'.
BMC50471I z/OS 2.4.0,PID=HBB77C0,DFSMS FOR Z/OS=2.4.0,DB2=13.1.501
BMC50471I REGION=0M,BELOW 16M=8.6M,ABOVE 16M=1,005.6M,IEFUSI=NO,CPUs=7,GPs=5,zIIPs=2
BMC50471I MEMLIMIT=15.9E,AVAILABLE=15.9E,MEMLIMIT SET BY:REGION=0
BMC50471I SMFID=DB2B,JOBID=J0940530,JOB=ADUEX11,STEP=UNLOAD11,CPU=8561-615 (z15)/1.71,72.0G
0
BMC50471I UNLOAD PLUS FOR DB2--V13.01.00 BASE
BMC50471I NO MAINTENANCE TO REPORT
BMC50471I DB2 UTILITIES COMMON CODE--V13.01.00 BASE
BMC50471I NO MAINTENANCE TO REPORT
BMC50471I SOLUTION COMMON CODE--V13.01.00 BASE
BMC50471I MAINT: BPJ1541 BPJ1713 BPJ2211
BMC50471I BMCSORT ENGINE--V02.04.01
BMC50471I MAINT: BPJ0691 BPJ0718 BPJ0881 BPJ0922 BPJ0996 BPJ1164 BPJ1309 BPJ1386 BPJ1497 BPJ1594 BPJ1724 BPJ1809
BMC50471I BPJ1833 BPJ1891 BPJ1905 BPJ2109 BPJ2232 BPJ2297
BMC50471I BMC STATS API--V13.01.00 BASE
BMC50471I NO MAINTENANCE TO REPORT
BMC50471I EXTENDED BUFFER MANAGER--V06.02.01
BMC50471I MAINT: BPE0443 BPE0445 BPE0447 BPE0449 BPE0450 BPE0451 BPE0452 BPE0455 BPE0456 BPE0457 BPE0460 BPE0463
BMC50471I BPE0467 BPE0468 BPE0469 BPE0473 BPE0474 BPE0475 BPE0479 BPE0480 BPE0482 BPE0487 BPE0488 BPE0489
BMC50471I BPE0493 BPE0497 BPE0498 BPE0501 BPE0503 BPE0507 BPE0512 BPE0513 BPE0517 BPE0518 BPE0519 BPE0523
BMC50471I BPE0524 BPE0527 BPE0528 BPE0530 BPE0531 BPE0534 BPE0535 BPE0540 BPE0541 BPE0542 BPE0545 BPE0549
BMC50471I BPE0551 BPE0552 BPE0555 BPE0557 BPE0560
0
BMC50471I ANALYZE=(DB2STATS,NOLIMIT) FORCE=NONE SORTNUM=32
BMC50471I CENTURY=(1950,2049) HISTORY=YES SQLDELAY=3
BMC50471I CHANGE_CONSISTENT=NO IBUFFS=25 SQLRETRY=100
BMC50471I CHANGE_QUIESCE=NO INLINE=NO SSREPORT=REPORT_SWITCH
BMC50471I CMAX=16 LOADDECP=NO TAPEDISP=DELETE
BMC50471I CMRATIO=50 LOCKROW=YES TASKMAX=200%
BMC50471I CONSTRULES=BMC MAXP=5 UBUFFS=25
BMC50471I CURRENTDEGREE=NONE MSGLEVEL=1 UNLDMAX=200%
BMC50471I DELFILES=NO NULLCHAR=X'6F' UNLOADDN_ACTIVE=(NO,NO)
BMC50471I DRNDELAY=3 NULLTYPE=T1 UNLOADDN=(SYSREC,SYSRED)
BMC50471I DRNRETRY=10 OPNDB2ID=YES USELRECL=NO
BMC50471I DRNWAIT=UTIL PLAN=ADU1310T UXSTATE=SUP
BMC50471I DSPLOCKS=NONE RECFM=AUTO WORKUNIT=SYSALLDA
BMC50471I EXCLDUMP=(X37,X22,X06) ROWSETSZ=100 XBMID=XBMDB2V
BMC50471I FILEREFDN=SYSREF SDUMP=YES ZIIP=ENABLED
BMC50471I FILL=NO SHRLEVEL=REFERENCE ZONEDDECOVP=(C,D)
BMC50471I FORCE_AT=(START,3) SMAX=16
BMC50471I FORCE_RPT=NO SMCORE=(0K,0K)
0
0
BMC50471I TAPES=NONE
0
BMC50470I OUTPUT = SYSREC SYSRED SYSREF
BMC50470I UNIT = SYSALLDA SYSALLDA SYSALLDA
BMC50470I VOLCNT = 25 25 25
BMC50470I GDGLIMIT = 5 5 5
BMC50470I GDGEMPTY = NO NO NO
BMC50470I GDGSCRAT = NO NO NO
BMC50470I STORCLAS = NONE NONE NONE
BMC50470I DATACLAS = NONE NONE NONE
BMC50470I MGMTCLAS = NONE NONE NONE
BMC50470I UNITCNT = 0 0 0
BMC50470I SPACE = CYL CYL CYL
BMC50470I PCTPRIM = AUTO AUTO AUTO
BMC50470I MAXPRIM = 0 0 0
BMC50470I MAXSECD = 0 0 0
BMC50470I FILESZPCT 100 100 100
BMC50470I NBRSECD = AUTO AUTO AUTO
BMC50470I DISKRETN = NONE NONE NONE
BMC50470I DISKEXPD = NONE NONE NONE
BMC50470I RETPD = NONE NONE NONE
BMC50470I EXPDT = 99000 99000 99000
BMC50470I TRTCH = NONE NONE NONE
BMC50470I DSNTYPE = NONE NONE PDS
BMC50483I SYSREC VOLUMES=NONE
BMC50483I SYSRED VOLUMES=NONE
BMC50483I SYSREF VOLUMES=NONE
0
BMC50483I SYSREC DSNAME=&USERID.&TYPE.S&SELNUM
BMC50483I SYSRED DSNAME=&USERID.&TYPE.S&SELNUM
BMC50483I SYSREF DSNAME=&USERID.&TYPE.S&SELNUM.P&POSNUM
0
BMC50471I DB2 DSNHDECP MODULE SETTINGS:
BMC50471I VERSION = 1310
BMC50471I SUBSYSTEM DEFAULT = DEMO
BMC50471I CHARACTER SET = ALPHANUM
BMC50471I DATE FORMAT = USA
BMC50471I TIME FORMAT = USA
BMC50471I LOCAL DATE LENGTH = 0
BMC50471I LOCAL TIME LENGTH = 0
BMC50471I DECIMAL POINT = PERIOD
BMC50471I DECIMAL ARITHMETIC = 15
BMC50471I DELIMITER = DEFAULT
BMC50471I SQL DELIMITER = DEFAULT
BMC50471I ENCODING SCHEME = EBCDIC
BMC50471I APPL. ENCODING SCHEME = EBCDIC
BMC50471I MIXED = NO
BMC50471I EBCDIC CCSID = (37,65534,65534)
BMC50471I ASCII CCSID = (819,65534,65534)
BMC50471I UNICODE CCSID = (367,1208,1200)
BMC50471I IMPLICIT TIME ZONE = CURRENT (-06:00)
BMC50658I DB2 CURRENT FUNCTION LEVEL IS V13R1M501
BMC50659I DB2 CATALOG LEVEL IS V13R1M501
BMC50660I DB2 HIGHEST ACTIVATED FUNCTION LEVEL IS V13R1M501
BMC50661I DB2 CODE LEVEL IS V13R1M501
BMC50471I BMC_BMCUTIL ='BMCUTIL.CMN_BMCUTIL'
BMC50471I BMC_BMCSYNC ='BMCUTIL.CMN_BMCSYNC'
BMC50471I BMC_BMCHIST ='BMCUTIL.CMN_BMCHIST'
BMC50471I BMC_BMCXCOPY ='BMCUTIL.CMN_BMCXCOPY'
BMC50471I BMC_BMCSMARTSWITCH='BMCUTIL.CMN_BMCSWITCH'
BMC50471I BMC_BMCSSTRACKING ='BMCUTIL.CMN_BMCSSTRACK'
0
0
BMC50102I UNLOAD INFILE BMCCPY
BMC50102I UNLOADDN SYSREC ACTIVE NO
BMC50102I SELECT 'ADU11TB1', * FROM ADU.ADU11TB1 {OBID 3}
BMC50102I SELECT 'ADU11TB2', * FROM ADU.ADU11TB2
BMC51654I DIRECT YES IN EFFECT
0
BMC50004I UTILINIT PHASE COMPLETE. ELAPSED TIME = 00:00:00
BMC54000I SMARTSWITCH NOT SUPPORTED - NO BMC AMI UTILITIES VERSION FOUND
BMC54003I SMARTSWITCH RULE: FORCE_NO_SWITCH COMMENT: SMARTSWITCH NOT ACTIVATED, TABLE/ALIAS DOES NOT EXIST
BMC50199I UNLOAD PLUS PROCESSING CONTINUES
BMC51689I ESTIMATED ROWS FOR SELECT 1 IS 0
BMC51689I ESTIMATED ROWS FOR SELECT 2 IS 0
BMC51639I FOR DDNAME 'SYSREC01' DSN=ADU.EXAMPL11.SYSREC01,DCB=(RECFM=FB,BLKSIZE=27820,LRECL=260)
BMC51639I FOR DDNAME 'SYSREC02' DSN=ADU.EXAMPL11.SYSREC02,DCB=(RECFM=VB,BLKSIZE=27998,LRECL=746)
BMC50041I 0: ZIIP ENABLED (0) USING XBM SUBSYSTEM XV2B
BMC50474I BELOW 16M = 8440K, ABOVE 16M = 1022788K, CPUS = 5
BMC51701I MAX TASKS = 2, MAX PARTITIONS PER TASK = 1, SORTWKS PER TASK = 0, MAX OPEN PARTITIONS PER TASK = 1
BMC50476I DDNAME = BMCCPY02, I/OS = 3, I/O WAITS = 1, RDB LOCK WAITS = 0
BMC50477I 2: PARTITION = 1, ROWS/KEYS = 2375, I/O WAITS = 0 ,DDNAME = BMCCPY02
BMC50478I 2: RDB LOCK WAITS = 0
BMC50476I DDNAME = BMCCPY01, I/OS = 6, I/O WAITS = 5, RDB LOCK WAITS = 0
BMC50477I 1: PARTITION = 1, ROWS/KEYS = 5000, I/O WAITS = 0 ,DDNAME = BMCCPY01
BMC50478I 1: RDB LOCK WAITS = 0
BMC50476I DDNAME = SYSREC01, I/OS = 4, I/O WAITS = 1, RDB LOCK WAITS = 0
BMC50476I DDNAME = SYSREC02, I/OS = 2, I/O WAITS = 1, RDB LOCK WAITS = 0
BMC51671I UNLOAD STATISTICS: 5000 ROWS PROCESSED FROM PARTITION 1
BMC51686I UNLOADING OF DATASET 'ADU.EXAMPL11.DSN1COPY.ADU11TSA' READ 65 PAGES
BMC51672I UNLOAD STATISTICS: 5000 ROWS PROCESSED FROM SPACE 'ADU11DB.ADU11TSA', 0 NOT SELECTED, 0 DISCARDED
BMC51671I UNLOAD STATISTICS: 2375 ROWS PROCESSED FROM PARTITION 1
BMC51686I UNLOADING OF DATASET 'ADU.EXAMPL11.DSN1COPY.ADU11TSB' READ 232 PAGES
BMC51672I UNLOAD STATISTICS: 2375 ROWS PROCESSED FROM SPACE 'ADU11DB.ADU11TSB', 0 NOT SELECTED, 0 DISCARDED
BMC51674I UNLOAD STATISTICS: 5000 RECORDS WRITTEN TO DDNAME 'SYSREC01'
BMC51674I UNLOAD STATISTICS: 2375 RECORDS WRITTEN TO DDNAME 'SYSREC02'
BMC51675I UNLOAD STATISTICS: 0 RECORDS DISCARDED DUE TO ERRORS
BMC50041I 0: ZIIP NOT ENABLED (0) USING XBM SUBSYSTEM XV2B
BMC50004I UNLOAD PHASE COMPLETE. ELAPSED TIME = 00:00:00
BMC51639I FOR DDNAME 'SYSCNTL' DSN=ADU.EXAMPL11.SYSCNTL,DCB=(RECFM=FB,BLKSIZE=3120,LRECL=80)
BMC51801I LOAD TABLE STATEMENTS WRITTEN TO DDNAME 'SYSCNTL'
0
BMC51810I LOAD DATA INDDN SYSREC01
BMC51940I EBCDIC CCSID(37,65534,65534)
BMC51811I INTO TABLE
BMC51809I ADU.ADU11TB1
BMC51815I ($CONST01 POSITION(1:8) CHAR (8)
BMC51813I ,COL1_INTEGER POSITION(9:12) INTEGER
BMC51815I ,COL2_CHAR_20 POSITION(13:32) CHAR (20)
BMC51815I ,COL3_CHAR_20 POSITION(33:52) CHAR (20)
BMC51815I ,COL4_CHAR_100 POSITION(53:152) CHAR (100)
BMC51815I ,COL5_CHAR_100 POSITION(153:252) CHAR (100)
BMC51813I ,COL6_INTEGER POSITION(253:256) INTEGER
BMC51813I ,COL7_INTEGER POSITION(257:260) INTEGER
BMC51809I )
BMC51810I LOAD DATA INDDN SYSREC02
BMC51940I EBCDIC CCSID(37,65534,65534)
BMC51811I INTO TABLE
BMC51809I ADU.ADU11TB2
BMC51815I ($CONST01 POSITION(1:8) CHAR (8)
BMC51813I ,COL1_INTEGER POSITION(9:12) INTEGER
BMC51815I ,COL2_CHAR_100 POSITION(13:112) CHAR (100)
BMC51815I ,COL3_CHAR_100 POSITION(113:212) CHAR (100)
BMC51813I ,COL4_VCHAR_250 POSITION(213:*) VARCHAR
BMC51813I ,COL5_VCHAR_250 POSITION(*:*) VARCHAR
BMC51815I ,COL6_TIMESTAMP POSITION(*:*+25) TIMESTAMP EXTERNAL(26)
BMC51809I )
0
BMC50476I DDNAME = SYSCNTL, I/OS = 1, I/O WAITS = 1, RDB LOCK WAITS = 0
0BMC50006I UTILITY EXECUTION COMPLETE, RETURN CODE = 0
Tip: For faster searching, add an asterisk to the end of your partial query. Example: cert*