Sample plug-in variables file (AMI_DevOps.properties)

#-----------------------------------------------
#-- BMC AMI DevOps for Db2
#-- BMC AMI SQL Assurance for Db2
#-- v13.01.00         
#-- AMI_DevOps.properties
#-- (c) Copyright 2019-2023 BMC Software, Inc.
#-----------------------------------------------

#-------------------------
#-- BMC AMI DevOps Common
#-------------------------

#-- Maximum Limit on Job Records
#-- The maxlimit is an optional property. Its value is used to decide the record
#-- count of each job spool file that gets downloaded to the plug-in workspace.
#-- For example, if maxlimit value is defined as 2000, then only the first 2000
#-- job records are downloaded from each spool file when the record count exceeds maxlimit.
#-- If the maxlimit property is not defined, commented out or no value is specified,
#-- maxlimit is not applied and all job records are downloaded.
#-- The maxlimit property is a fixed and case-sensitive key. It should always use lower-case.
#-- This is for BMC AMI SQL Assurance for Db2 and BMC AMI DevOps Schema Mgmt for Db2.
maxlimit=

#-- Dataset recall wait time for the migrated dataset
#-- The dsrecalltime is an optional property. Its value is used to decide the maximum
#-- dataset recall wait time in seconds for the migrated dataset.
#-- The default is 30 seconds, and the allowed range for this value is 5-600 seconds.
#-- For example, if dsrecalltime value is defined as 60, then recall of the migrated
#-- dataset waits for the maximum 60 seconds. If dataset is not recalled within specified
#-- time, it gives response timeout error.
#-- If the dsrecalltime property is not defined, commented out or no value is specified,
#-- then default 30 seconds is considered to recall the dataset.
#-- The dsrecalltime property is a fixed and case-sensitive key. It should always use lower-case.
#-- This is for BMC AMI DevOps Common and BMC AMI DevOps Schema Mgmt for Db2.
dsrecalltime=

#-- BMC AMI Command Center for Db2 plan  
#-- The gudplan is required to evaluate 2 types of violations which are displayed in
#-- the BMC AMI Command Center tool:
#--    -SQL violations, via the SQL Assurance process
#--    -Schema violations, via the Schema Standards process
#-- The default plan name is BMCGUIPL.
gudplan=BMCGUIPL


#------------------------------
#-- SSL certificate validation     
#------------------------------

#-- The TSFLAG is an optional property. Its value is used as a flag to decide whether
#-- or not SSL certificate validation is performed.
#-- The default value for the TSFLAG property is TRUE.
#-- You can define the value of the TSFLAG property as FALSE when SSL certification
#-- validation is not required.
#-- If the TSFLAG property is not defined or commented out, the default value, TRUE,
#-- is used, and SSL certificate validation is performed.
TSFLAG=TRUE

#------------------------------
#-- LPAR/Subsystem Information
#------------------------------

#-- Accounting information
#-- The account number identifies the account number to which the job is charged.
acctno=

#-- LPAR
#-- The LPAR identifies the logical partition (mainframe) on which the product will
#-- perform the comparison, generate Change Definition Language (CDL), and apply
#-- changes.
lpar1=

#-- DSNEXIT
#-- DSNEXIT identifies the data set name of the DB2 EXIT (DSNEXIT) library.
#-- You can use the &SSID. variable within your DSNEXIT data set to identify your
#-- subsystem ID similar to DOPTS.
#-- This will use the resolved subsystem ID specified in your project.
#-- Example: dsnexit=CSG.&SSID..DSNEXIT will be resolved with CSG.DEJM.DSNEXIT where
#-- DEJM is subsystem ID specified in SSID field of the Schema Change Migration step.
#-- The DSNEXIT data set will be added to the JOBLIB DD.
dsnexit=

#-- DSNLOAD
#-- DSNLOAD identifies the data set name of the library in which the DB2 DSN
#-- Command Processor load modules are stored. The DSNLOAD data set will be  
#-- added to the JOBLIB DD.
dsnload=

#----------------------------
#-- Installation Information
#----------------------------

#-- High-level qualifier for runtime enablement data sets
#-- The RTEHLQ identifies the high-level qualifier for runtime enablement data sets.
rtehlq=

#-- High-level qualifier for user data sets
#-- The USRHLQ identifies the high-level qualifier for user data sets.
usrhlq=


#-- PROCLIB DD
#-- The PROCLIB DD identifies the partitioned data set (PDS) that contains
#-- the procedures used by BMC AMI DevOps for Db2. The data set is typically
#-- defined as rtehlq..BMCCNTL.
proclib=

#-- JOBLIB DD
#-- The JOBLIB DD identifies the name of the library that contains a program
#-- to be executed. Multiple JOBLIB DDs can be specified.
#-- The JOBLIB is typically defined as usrhlq..UBMCLINK and rtehlq..BMCLINK.
joblib1=
joblib2=

#--------------------------------------------
#-- BMC AMI DevOps Schema Management for Db2
#--------------------------------------------

#-- Default options module
#-- The DOPTS identifies the name of the default options module for Change Manager.
#-- The module contains options and values for product options. This module
#-- resides in the HLQ.UBMCCNTL member (where HLQ is the high-level qualifier)
#-- that has the same name as the installation options module.
#-- The default options module is ACMDOPD1.
dopts=

#-- Product options file data set name and member name
#-- The POF identifies the data set name and the member name of the product
#-- options file, which is an 80-character sequential file. The POF contains
#-- parameters and values for different product options. The file is located
#-- in the HLQ.UBMCCNTL data set.
#-- The default POF member name is AJXC1POF.
pofdsn=

#------------------
#-- Data Set Names
#------------------

#-- DDL PDS Name
#-- The DDL PDS name identifies the name of the partitioned data set, sequential
#-- file, or workfile in which the DDL will reside. The data set name must be
#-- unique, and cannot be the same name as the data sets that are used for the
#-- CDL, worklist, impact report, or Execution JCL.
ddlpds=

#-- CDL PDS Name
#-- The CDL PDS name identifies the name of the partitioned data set in which the
#-- resulting CDL will reside. The data set name must be unique, and cannot be
#-- the same name as the data sets that are used for the worklist, impact report,
#-- Execution JCL, or DDL.
cdlpds=

#-- Worklist PDS Name
#-- The worklist PDS name identifies the name of the partitioned data set in which
#-- the worklist will reside. The worklist contains the DB2 utility commands, AMS
#-- commands, security commands, and SQL statements that are necessary for
#-- implementing the changes in the CDL. The data set name must be unique,
#-- and cannot be the same name as the data sets that are used for
#-- the CDL, impact report, Execution JCL, or DDL.
wlpds=

#-- Execution JCL PDS Name
#-- The Execution JCL PDS name identifies the name of the partitioned data set
#-- in which Execution JCL will reside. The JCL processes the worklist. The data set
#-- name must be unique, and cannot be the same name as the data sets that are
#-- used for the CDL, worklist, impact report, or DDL.
execpds=

#-- Impact Report PDS Name
#-- The Impact Report PDS name identifies the name of the partitioned data set in
#-- which the impact report will reside. The impact report provides information
#-- about the number of actions that are required to process changes identified
#-- by the comparison process. The data set name must be unique, and cannot be
#-- the same name as the data sets that are used for the CDL, worklist, Execution
#-- JCL, or DDL.
irpds=

#---------------------------------
#--- Data Set Names for Rollback
#---------------------------------

#-- Rollback CDL PDS Name
#-- The Rollback CDL PDS name identifies the name of the partitioned data set in
#-- which the resulting Rollback CDL will reside. The data set name must be unique
#-- for each project or job, and cannot be the same name as the data sets that are
#-- used for the worklist, Execution JCL, or DDL.
rbcdl=

#-- Rollback Worklist PDS Name
#-- The Rollback Worklist PDS name identifies the name of the partitioned data set
#-- in which the Rollback Worklist will reside. The worklist contains the DB2 utility
#-- commands, AMS commands, security commands, and SQL statements that are necessary
#-- for implementing the changes in the CDL. The data set name must be unique for each
#-- project or job, and cannot be the same name as the data sets that are used for
#-- the CDL, Execution JCL, or DDL.
rbwl=

#-- Rollback Execution JCL PDS Name
#-- The Rollback Execution JCL PDS name identifies the name of the partitioned data
#-- set in which Rollback Execution JCL will reside. The JCL processes the worklist.
#-- The data set name must be unique for each project or job, and cannot be the same
#-- name as the data sets that are used for the CDL, worklist, or DDL.
rbexec=

#-- Rollback Impact Report PDS Name
#-- The Rollback Impact Report PDS name identifies the name of the partitioned data
#-- set in which the Rollback Impact Report will reside. The Rollback Impact Report  
#-- provides information about the number of actions that are required to process  
#-- changes identified by the comparison process. The data set name must be unique,  
#-- and cannot be the same name as the data sets that are used for the CDL, worklist,  
#-- Execution JCL, or DDL.
rbir=

#---------------------------------
#-- BMC AMI SQL Assurance for Db2
#---------------------------------


#--------------------------------------------
#--- BMC AMI SQL Explorer for Db2 properties
#--------------------------------------------

#-- SQL Explorer plan   
#-- The pssplan is required to run an Explain on SQL statements via the SQL Assurance
#-- process.  To determine the plan name, view your USRHLQ..UBMCSAMP data set and locate
#-- the member PSS2<ssid> (where ssid is your db2 subsystem name).  In that member
#-- is the name for the PSSPLAN.
pssplan=

#-- SQL Explorer rules data set
#-- The ruledsn property identifies the name of the data set that contains the rule  
#-- set members for SQL Explorer.  Typically, this is RTEHLQ..BMCSAMP.
ruledsn=

#-- SQL Assurance rules member
#-- The rules property identifies the SQL Assurance default rules member
#-- name in the ruledsn.  The default is COBDFLT.  You may edit the default member or
#-- configure your own.
rules=COBDFLT

#-- SQL Explorer currency
#-- The currency property is optional and used with the Explain SQL statements.  It
#-- identifies the three-character currency code for the monetary unit used to calculate
#-- the cost translation rate. You can use any characters except spaces in this field,
#-- though BMC Software recommends you use ISO 4217 standard codes.
#-- The default is USD (U.S. dollars).
currency=USD

#---------------
#-- End of File
#---------------