User abend codes BMCU0000 through BMCU4099

For the BMC system administration family of products for IMS, this topic describes information about user abend codes and subcodes for particular user abend codes.

Number

Description

BMCU0077

MODULES: DLAXSGI0, DLAXALV0, DLAXALT0, DLAXALD0

Explanation: The occurrence of this abend indicates a serious internal error or possibly invalid data in a DELTA IMS log record. The operation is not performed.

User response: Contact BMC Customer Support. You might need to obtain a SYSMDUMP of the TSO address space to submit to BMC for analysis.

BMCU0258

MODULE: VTFXCCBn

Explanation: Abend U0258 occurs for the same reason as IMS U0258. It is a probable SPA data set I/O error or insufficient data set allocation. A return code of 12 indicates that DELTA IMS detected the error with the SPA data set.

User response: Reallocate the SPA data set and restart IMS with FORMAT SP.

BMCU1000

MODULE: DLAXCTL0

Explanation: The VTAM ACB name provided to BMCLINK in the BMCLINK startup JCL was either missing or was greater than the maximum allowed eight characters. BMCLINK terminates abnormally.

User response: This name is provided in the PARM parameter. Correct the name in the BMCLINK startup JCL and resubmit the job.

BMCU1002

MODULES: DLAXCTL0, DLAXVTI0, DLAXBCL0, DLAXBMP0, DLAXVTB0

Explanation: The operator requested a shutdown of BMCLINK with a dump, or a user requested an abend via the batch DELTA List ABEND command. BMCLINK terminates abnormally.

User response: No action is required.

BMCU1003

MODULE: DLAXCMM0

Explanation: The operator replied KILL to the BMCLINK outstanding WTOR. BMCLINK terminates abnormally.

User response: No action is required.

BMCU1004

MODULE: DLAXSLU0

Explanation: A VTAM RPL-based request failed with a return code of 18, indicating an invalid request. The requested function is not executed.

User response: Contact BMC Customer Support. You might need to obtain a SYSMDUMP of the TSO address space to submit to BMC for analysis.

BMCU4060

MODULES REFERENCED IN SUBCODE

Explanation: U4060 is issued as the result of a catastrophic error in the Translate Subsystem which precludes a possible recovery. At the time of the abend, register R15 will contain a subcode further explaining the reason for the failure. IMS terminates abnormally.

User response: See the explanation of the subcodes in the table and take appropriate action.

Subcode in R15	Module(s)	Description
000	DLATXDSN	Table data set allocate call sequence error
001	DLATZOPR	Invalid number (negative or greater than 512) of I/O buffers
002	DLATZOPR	Invalid number (negative or greater than 512) of look-aside buffers
003	DLATZOPR	TSMIOPEN flag conflicts with DCBOFLGS for open/closed data set status
004	DLATZOPR	Attempt to open table data set that was already open
005	DLATZCLR	TSMIOPEN flag conflicts with DCBOFLGS for open/closed data set status
006	DLATZOPS	Attempt to open QSAM data set with a TSS LOAD, UNLOAD, or FORMAT command; data set already open
007	DLATZOPS	Unrecognized DEB structure
008	DLATZOPS	TRKCALC return code of 4
009	DLATZOPS	No extents in data set
00A	DLATZRDS DLATZWRS	Data set not open
00B	DLATZCLS	Attempt to close a data set that was not open
00C	DLATZINC	Table data set block size too small
00D	DLATZGTB	No buffer available; unable to wait because no ECB was supplied
00E	DLATZRDR DLATZWRR	Invalid buffer address
00F	DLATZFRB	Invalid address of buffer to free
010	DLATXTRX	Table data set not open; TSS data set name missing from the virtual terminal customization options
012	DLATXULD	QSAM data set not open
015	DLATZENQ DLATZDEQ	Invalid ENQ/DEQ option
016	DLATZDEL	Negative number entries present in table
017	DLATZDEL	Entry address to delete not in table

BMCU4061

Module: DLAXNTLn

Explanation: A DELTA IMS dynamic intercept application failed. IMS initialization fails.

User response: Check SYSMSG for BMCnnnn-type messages that preceded the abend. Contact BMC Customer Support immediately. You might need to obtain a SYSMDUMP of the IMS control region to submit to BMC for analysis.

BMCU4062

MODULES: VTFXCLBn, VTFXCNTn, VTFXHB6n, VTFXTIMn

Explanation: An unrecoverable program-detected error occurred. Register R15 contains a subcode used to explain the error. IMS terminates abnormally.

User response: Contact BMC Customer Support.

Code	Module	Description
000	VTFXTIMX	Incorrect post code to activate timer. R3 contains post code. Post code postCode expected.
001	VTFXHB6X	DFSBCB passed nonzero return code on AWE GETMAIN request.
002	VTFXHB6X	DFSCIR passed nonzero return code on ITASK create request. The ITASK to be created was for the Timer Services Action routine.
003	VTFXCLBX	VLB to be deleted was not found on Hash queue.
004	VTFXCLBX	VLB to be deleted was not found on Allocate queue.
005	DLAXFPRX	Locate DLAXMVTX failed in front end DBFNRST0.
006	VTFXHB6X	Module GETMAIN for timer ECB failed.
007	VTFXRS0X	VPRINTER CNT add failed (full VCN pool). R2=VPD log record address.
008	VTFXRS0X	VPRINTER did not add back into VCN pool at same slot. R2 = VPD LOG REC, R7=VCN ADDR, SAVER1=VCN
009	VTFXRS0X	VPRINTER slot in VCN pool used by another VCN. R2 = VPD LOG REC, R7=VCN ADDR. Perform a /ERE BUILDQ.
00A	VTFXRS0X	GETMAIN failure near label BEGIN000.
00B	VTFXRS0X	DFSCRBP0 level incorrect. R3=ADDR ID in VTFXHCBX that detected the error.
00C	VTFXRS0X	Slot in VLB pool used by incorrect node name. R5=VLB address, R4=checkpointed data address.
00E	VTFXRS0X	VLB added into pool at wrong address. R5=VLB address, R3=wrong VLB address.
00F	VTFXSGPX	LTERM name in CNT addressed by URMCNT does not match R1=URMCNT R8=URMDSECT.
010	VTFXSGPX	VCN pool full; should not occur because the VCN pool had just been checked to ensure that the requested space was available.
011	VTFXSGPX	During /ERE, a CNT was added at a different slot in the VCN pool than before the failure. R3=original CNT address, R1=new CNT address, R8=URMDSECT (signon log record).
012	VTFXLGPX	During /ERE, a CNT was added at a different slot in the VCN pool than before the failure. R6=original CNT address, R1=new CNT address, R5=LGRDSECT (logon log record).
013	VTFXLGPX	VCN pool full. Should not occur because the VCN pool had just been checked to ensure that the requested space was available.
014	DLAXNTLX	Security key decode error. R14 contains the return code.
015	DLAXFPRX	Locate failed for ESCD in the front end of DBFNRST0.
016	DLAXJNX0	The journal ECB was posted with an incorrect post code. Post code 'JNL' was expected.
017	DLAXJNL0	The wrong event type was passed to the journal. X'00' through X'24' is a valid range.
018	VTFXRS0X	An X'DE4C' VCN checkpoint record indicated that a VCN was to be restored to the VCN pool, but the calculated slot in the VCN pool for this VCN was already in use for another VCN. SAVER1=VCN address, R2=DE4C record, R4=VCN entry in X'DE4C' record to restore.
019	VTFXRS0X	An X'DE4C' VCN checkpoint record indicated that a VCN was to be restored to the VCN pool, but a nonzero return code from VTFXSTMX indicated that the requested space was not available. R2=DE4C record address, R4=DE4C VCN entry, SAVER15=VTFXSTMX return code.
01A	VTFXRS0X	An X'DE48' VLB checkpoint record indicated that a VLB was to be restored to the VLB pool, but a nonzero return code from VTFXSTMX indicated that the requested space was not available. R2=DE48 record address, R4=DE48 VLB entry, SAVER15=VTFXSTMX return code.
01B	VTFXRS0X	An X'DE50' USB checkpoint record indicated that a USB was to be restored to the USB pool, but the calculated slot in the USB pool for this USB was already in use for another USB. SAVER5=USB address, R2=DE50 record R4=USB entry in X'DE50' record to restore.
01C	VTFXRS0X	An X'DE50' checkpoint record indicated that a USB was to be restored to the USB pool, but a nonzero return code from VTFXSTMX indicated that the requested space was not available. R2=DE50 record address, R4=DE50 USB entry, SAVER15=VTFXSTMX return code.
01D	VTFXRS0X	An X'DE00' log record indicated that a VLB was to be restored to the VLB pool, but a nonzero return code was received from VTFXCLBX after trying to add the VLB. R2=DE00 record.
020	VTFXLGPX	A virtual terminal logon was being processed. Flag VLB2VTCB indicated that the VLB needed to be added to the VLB queue, but VLBNEXT indicated that the VLB was probably already on the queue. R8=VLB address.
021	VTFXLGPX	A virtual terminal logon was being processed. Flag VLB2VTCB indicated that the VLB needed to be added to the VTCB queue, but VLBVTCB indicated that the VLB was probably already on the queue. R8=VLB address.
022	DLAXCMDX	During /ERE DELTA IMS update reprocessing, an update failed that initially succeeded. Convert the value in R14 to decimal for the DELTA IMS message number that describes the error. R7=ITXDSECT.
023	DLAXCMDX	During /ERE DELTA IMS update reprocessing, an update failed that initially failed. R7=ITXDSECT.
024	VTFXRS0X	An X'DE54' VPO checkpoint record indicated that a VPO was to be restored to the VPO pool, but the calculated slot in the VPO pool for this VPO was already in use for another VPO. SAVER5=VPO address, R2=DE54 record R4=VPO entry in X'DE54' record to restore.
025	VTFXRS0X	An X'DE54' VPO checkpoint record indicated that a VPO was to be restored to the VPO pool, but a nonzero return code from VTFXSTMX indicated that the requested space was not available. R2=DE54 record address, R4=DE54 VPO entry, SAVER15=VTFXSTMX return code.
026	VTFXSTMX	A call to VTFXSTMX requested an invalid pool number. R7 contains the invalid pool number.
027	VTFXSTMX	A call to VTFXSTMX requested a specific area GETMAIN call. The area requested was either not within the specified pool or was not at the address of the first byte of a slot in that pool. R7=pool description, R3=area address requested.
028	VTFXSTMX	A call to VTFXSTMX requested a specific area GETMAIN call. The area requested was already used. R7=pool description, R3=area address requested.
029	VTFXSTMX	A call to VTFXSTMX requested an area to be FREEMAINed, but the area was not yet allocated. R7= pool description, R3=area address.
02A	VTFXSTMX	A call to VTFXSTMX requested an area be FREEMAINed, but the area requested was either not within the specified pool or was not at the address of the first byte of a slot in that pool. R7=pool description, R3=area address.
02B	VTFXSTMX	Reserved
02C	VTFXSTMX	Reserved
02D	VTFXSTMX	Reserved
02E	VTFXRSTX	DFSCBTS or $VTFCBS failed to locate a VTAM terminal of SLU2 or 3270 model type.
030	VTFXLATX	The post code used to notify an ITASK iwaiting for the VTF latch was incorrect. The expected code is C'VTF'. R10 addresses the ECB containing the post code received.
031	VTFXLATX	An attempt was made to free the virtual terminal latch when it was not held. R10 addresses the ECB attempting to free the latch.
032	VTFXLATX	The ITASK attempted to free the virtual terminal latch but did not hold the latch. R10 addresses the ECB attempting to free the latch.
033	VTFXLATX	The ITASK attempted to obtain the virtual terminal latch but already possessed the latch. R10 addresses the misguided ITASK’s ECB.
034	VTFXLATX	Reserved
035	VTFXLATX	Reserved
036	DLAXNTLX	The DELTA IMS command override (XOPCMD) was not acceptable (that is, not found in the cmdlist in DLAXNTLX). SAVER1 is the base for extended options where command override is requested.
037	DLAXNTLX	IMS CVB for command override was not found. SAVER1 is the base for extended options where command override is requested.
038	VTFXRS0X	DFSCLV00 is a different size from shutdown to warm start. Probable IMSGEN performed without IMS cold start.
039	VTFXICIX	A VLB waiting for restart to complete was posted with an unexpected post code. The expected code was C'VTK'. R9 contains the address of the ECB.
040	VTFXCNTX	CNT to reassign was not assigned to any CTB. R6 contains the CNT address.
043	VTFXCNTX	CTB address to be tested for CNT assigned is not a valid CTB address. R7=CTB, R6=CNT.
044	VTFXCNTX	A conversational CTB (CTBFLAG1) did not show any busy conversations (CTBCCBPT). R6=CNT address, R7=CTB address.
045	VTFXCNTX	A virtual terminal showed a busy conversation but was not in conversational status. R2=CCB address, R6=CNT address, R7=CTB address.
046	VTFXCNTX	A busy conversation associated with a virtual CTB does not show an output CNT offset. R2=CCB addr, R6=CNT address, and R7=CTB address.
047	VTFXCNTX	An invalid CNT address was found. CNT address validation was requested by extended options. R6 contains the invalid address. R7 contains the CTB address starting the CNT chain. R5 is either zero or the CNT that pointed to the invalid CNT. SAVER14 contains the address in VTFXCNTX that requested address validation.
048	VTFXCNTX	CNT was not chained off the CTB referenced by CNTCTBPT. CNT validation was requested by extended options. R6 contains the CNT address. R7 contains the CTB. SAVER14 contains the address in VTFXCNTX that requested address validation.
049	VTFXCNTX	049 through 04F is reserved for VTFXCNTX.
050	DLATZARI	Invalid post code signaling TSS read completion.
051	VTFXTSSX	IDENTIFY of CSECT DLATZARS failed. RC from IDENTIFY loaded into R14.
052	VTFXRSTX	The general-purpose node for VTFBMCLB is IMSGEN-defined. Restart cannot continue.
053	DLATZARS	AREFUNC is invalid.
054	VTFXRS0X	Error determining length of IMS log record 4021 VTCB data.
055	VTFXRS0X	Cannot find a model name from the virtual terminal checkpoint record.
056	DLAX1V9X	COMMIT timestamp cannot be found in the X'70' OLC record in XRF backup mode.
057	DLAX1V9X	Locate DLAXMVTX failed in the intercept module for DFSICV90 in XRF backup mode.
058	DLAXCL6X	XRF backup DELTA List posted with an incorrect post code. Post code C'CSP' was expected.
059	VTFXRS0X	Unable to find VTFBMCUS on non-cold start. A cold start is required for initial activation or for any deactivation of DELTA IMS VIRTUAL TERMINAL.
060	VTFXRS0X	Unable to find node by name with DFSCBTS in X'DE4C' log record.
061	VTFXRS0X	Unable to find LTERM by name with DFSCBTS in X'DE00' log record, X'DE04' log record, or X'DE24' log record.
062	VTFXRS0X	Unable to find node by name with DFSCBTS in X'DE00' or X'DE24' log record.
063	VTFXRSTX	Unable to build VTFBMCUS.
064	VTFXRS0X	Unable to find VTFBMCUS on non-cold start. Cold start is required to activate and deactivate DELTA IMS VIRTUAL TERMINAL the first time.
065	VTFXRS0X	After installing the product, an attempt to initially start DELTA IMS via a warm start failed. A cold start is required to initially start this version of DELTA IMS after installation.
070	VTF1INB	Unable to get storage for IMS hash tables.
071	VTF1INBX	Unable to create descriptor.
E00	DLAXINTX	IMODULE GETMAIN failed trying to obtain 16 bytes of CSA used to communicate DELTA IMS level and tape date to DLAXDL1X in DL/I SAS address space. SAVER15 contains the return code from IMODULE.
E01	DLAXINTX	An attempt to locate a control block table entry failed. SAVER0 contains the ID of the CBTE.
E02	DLAXINTX	The address of CSECT DFSSBLK0/DBFSBLK0 was located via the CBTE index into DFSCBT40. However, the CSECT ID (that is, SBLK) expected to be found at +8 into the CSECT was incorrect. SAVER1 contains the presumed CSECT address.
E03	DLAXINTX	DLAXZOCX passed a nonzero return code. This situation can happen if DFSSBLK0/DBFSBLK0 are not at the expected level.
E04	DLAXINTX	E04 through EFF is reserved for DLAXINTX.
F00	VTFXINTX	F00 through FFF is reserved for VTFXINTX.

BMCU4063

MODULES: DLAXRSTn, DLAXINTn, DLAXFP1n, DLAXGDTn, DLAXCSPn, DLAXDL1n, DLAXNTLn, VTFXRSOn, VTFXINTn, VTFXRSTn, VTFXRS1n

Explanation: A DELTA IMS initialization error occurred. IMS terminates abnormally.

BMCU4064

MODULE: DLAXCSPn

Explanation: Messages BMC1747 and BMC1748 were issued, documenting a failed attempt by DELTA IMS to reapply an update during IMS initialization, restart, or online change. The MTO was notified with message BMC1746:

SHOULD IMS RESTART/ONLINE CHANGE CONTINUE? REPLY Y, N, OR C

The operator replied N to the message. For additional information, see the explanations for messages BMC1746 and BMC1748. IMS restart or online change is aborted.

User response: Contact BMC Customer Support.

BMCU4065

MODULE: Various

Explanation: A fatal error occurred during the install process. IMS terminates abnormally.

User response: Note the return code in register R15 and contact BMC Customer Support. There are numerous subcodes for this abend. The abend code alone will not be sufficient to diagnose the problem.

BMCU4066

{MODULE | MODULES}: {DLAXLGP0 | variousETAmodules}

Explanation: If you are using a DELTA IMS or DELTA PLUS product, a serious error occurred while the DELTA IMS or DELTA PLUS Log data set was being formatted. At the conclusion of the format operation, either an unequal number of WRITE and CHECK macro instructions had been issued, or the number of CHECK operations was not equal to the calculated number of blocks in the log data set. The BMCLINK TSO session terminates abnormally. If you are using ETA, an unrecoverable program-detected error occurred. Register R15 contains a subcode used to explain the error. IMS terminates abnormally.

User response: If you are using a DELTA IMS or DELTA PLUS product, log off TSO, log back on, and retry the operation. Contact BMC Customer Support if the problem persists. If you are using ETA, check for a more detailed message regarding the problem that normally displays shortly before message BMCU4066. If another message does not display, or if you need additional information, contact BMC Customer Support.

Subcode	Module	Description
001	ETMIMRC0	unrecognizable IMS release
002	ETMIMRCx	USERAREA GETMAIN error
003	ETMIMRCx	IMODULE LOAD error
004	ETMHXCIx	no module
005	ETMHXCIx	processing error
006	ETMHXCIx	IMODULE GETMAIN failed
007	ETMHXCIx	locate error in DFSXCIC0
008	ETMHXCIx	IMDOULE LOAD ETMIINTx failed
009	ETMIBCBx	USERAREA GETMAIN failed
00A	ETMIBCBx	DFSCBT10 BLDL error
00B	ETMIBCBx	DFSCBT10 GETMAIN error
00C	ETMIBCBx	DFSCBT10 DIRLOAD error
100	ETMIINTx	USERAREA GETMAIN failed
101	ETMIINTx	IMSID options at incorrect level
102	ETMIINTx	security decode error
103	ETMIINTx	journal attach error
104	ETMIINTx	IMODULE GETMAIN ETMTRACE failed
105	available	not used
106	available	not used
107	ETMIINTx	IMODULE GETMAIN ETMDITX failed
108	ETMIINTx	XMFE error
109	ETMIINTx	csect not located
10A	ETMIINTx	module not found
10B	ETMIINTx	INIT module failed
10C	ETMIINTx	IMODULE GETMAIN ETMELGNS failed
10D	ETMIINTx	ETMUDITx failed to get dummy ITASK area
110	ETMIPCKx	IMODULE GETMAIN for ETMIPCKS failed
111	ETMIPCKx	IMODULE LOAD for ETMLMODx failed
112	ETMIPCKx	IMODULE LOAD failed
113	ETMIPCKx	IMODULE ETMXMFE0 errors
114	ETMIPCKx	IMODULE GETMAIN for ETMLEVEL failed
115	ETMIPCKx	IMODULE level incompatibility
128	ETMIMSGx	IMODULE GETMAIN for ETMSMSGS failed
12C	ETMICMDx	$ETMLOC ETMLCMDx failed
12D	ETMICMDx	DFSICLF0 for CVB failed
130	ETMIBC2x	unable to find IMS CFEZ pool
131	ETMIBC2x	unable to find BMC ESB/EVO pool
132	ETMIBC2x	IMODULE GETMAIN failed for ESB hash table
133	ETMIBC2x	IMODULE GETMAIN failed for EPO hash table
140	ETMICMLx	unable to locate ETALICM0 at initialization
141	ETMICMLx	IMODULE GETMAIN failed for ETMISYLS
144	ETMIRACx	IMODULE GETMAIN failed for RACF workarea
145	ETMIRACx	unable to build CSS table
146	ETMIRACx	unable to build CSU table
162	ETMIINTx	incorrect IMSID specified in options module
163	ETMIINTx	XRF alternate options module missing
164	ETMIINTx	IMSID mismatch between options modules
200	ETMRRSTx	MODULE LOAD for DFSRST00 failed
201	ETMRRSTx	IMODULE LOCATE for DLAXRSTx storage failed
202	ETMRRSTx	$ETMLOC for DLAXRSTx CDE failed
203	ETMRRSTx	IMODULE LOCATE for VTFXRSTx storage failed
204	ETMRRSTx	$ETMLOC for DLAXRSTx CDE failed
205	ETMRRSTx	IMODULE LOAD 'other' restart processor failed
206	ETMRRSTx	cannot find DFSRLP00
207	ETMRRSTx	IMODULE GETMAIN for ETMRRSTS failed
208	ETMRRSTx	XMFE failed with message (bad return code)
209	ETMRRSTx	XMFE front-end failed (not front-ended)
20A	ETMRRSTx	$ETMLOC DFSRLP00 failed
210	ETMRRLPx	IMODULE GETMAIN for 'old' ECD failed
400	ETMERLDx	reload wait posted with invalid post code
401	ETME...x	waited exit posted with invalid post code
410	ETMXTMSx	TIMER Scan posted with invalid post code (INIT)
411	ETMXTMSx	TIMER Scan posted with invalid post code (TERM)
415	ETMXTMAx	TIMER Action posted invalid post code (INIT)
420	ETMXRCIx	RACF ITASK posted with invalid post code
425	ETMUCSTx	unable to expand CSU/CSS table
430	ETMXRACx	RACF ITASK posted with invalid post code

BMCU4067

MODULES: DLAXCVAn, DLAXCSPn

Explanation: A serious error occurred while DELTA IMS was attempting to reapply changes following an IMS /MODIFY. IMS terminates abnormally.

BMCU4068

MODULE: VTFXRSOn

Explanation: The maximum number of users that may be /SECURITY allowed has been decreased. In addition, the new maximum amount is insufficient for successful IMS restart. Message BMC6684 precedes this abend and identifies the deficiency. IMS initialization fails.

User response: To force DELTA IMS to accept the new maximum amount, perform an IMS cold start. Otherwise, restore the maximum number specification to the original value or to a value that is higher than the current maximum amount and perform an IMS warm start.

BMCU4069

MODULE: DLAXMVTn

Explanation: An attempt was made to run an expired or unauthorized copy of DELTA IMS. IMS initialization fails.

User response: Contact BMC Customer Support to ensure continuity of DELTA IMS at your site.

BMCU4070

MODULES: {various | BMCXRRA0, BMCXMRC0}

Explanation: If you are using a DELTA IMS or DELTA PLUS product, a fatal error occurred during the install process. If you are using ETA, an unrecoverable program-detected error occurred. Register R15 contains a subcode used to explain the error. IMS terminates abnormally.

User response: If you are using a DELTA IMS or DELTA PLUS product, note the return code in register R15 and contact BMC Customer Support. There are numerous subcodes for this abend. The abend code alone will not be sufficient to diagnose the problem. If you are using ETA, check for a more detailed message regarding the problem that normally displays shortly before message BMCU4070. If another message does not display, or if you need additional information, contact BMC Customer Support.

Subcode	Module	Description
000	BMCXRRA0	DFSRRC00 not caller - savearea
001	BMCXRRA0	DFSRRC00 not caller - eye-catcher
002	BMCXRRA0	could not find DFSPRRX0
003	BMCXRRA0	could not find DFSPRRX0
004	BMCXMRC0	GETMAIN failed for USERAREA
005	BMCXMRC0	unrecognizable IMS region type
006	BMCXMRC0	SWAREQ macro failed for JFCB
007	BMCXMRC0	dynamic allocation error
008	BMCXMRC0	OPEN failed
009	BMCXMRC0	BLDL failed
00A	BMCXMRC0	LOAD failed
00B	BMCXMRC0	CLOSE failed
00C	BMCXMRC0	DELETE failed
00D	BMCXMRC0	BMC copy of DFSMVRC0 not found in STEPLIB/JOBLIB
00E	BMCXMRC0	IMS copy of DFSMVRC0 not found in STEPLIB/JOBLIB
00F	BMCXMRC0	IDENTIFY failed for DFSRRA00
010	BMCXMRC0	FREEMAIN failed

User abend codes BMCU0000 through BMCU4099

On this page