Messages AMTR

This group includes messages for the 

BMC AMI Ops SYSPROG Services

 product.

Number

Description

AMTR02I

ecvtpnam ecvtpver.ecvtprel.ecvtpmod FMID cvtprodi z/Architecture HiperDispatch=vvv SMT=nn


Explanation: Displays system release level information. Values represented by: ecvtpnam, ecvtpver, ecvtprel, ecvtpmod, and cvtprodi were copied from those control block fields. z/Architecture is present when the processor supports z/Architecture. HiperDispatch=vvv indicates the status of HiperDispatch, where vvv is one of the following:

  • HiperDispatch=NA indicates that the processor or environment does not support HiperDispatch
  • HiperDispatch=NO indicates that HiperDispatch is available but is not active.
  • HiperDispatch=YES indicates that HiperDispatch is available and active.
  • SMT=NA indicates that Simultaneous Multithreading is not active on the LPAR.
  • SMT=nn indicates that Simultaneous Multithreading is active at a maximum of nn threads.

User response: No action is required.

AMTR03I

CPU dd Serial Number ssssss Model nnnn, Type=tt  MT=nn

Explanation: Displays CPU information The CPU ID value is displayed in decimal format.

User response: No action is required.

AMTR0HI

System Name=cccccccc

Explanation: Displays the System Name (obtained from CVTSNAME).

User response: No action is required.

AMTR0RI

Restricted Use CSA is defined

Explanation: This indicates that Restricted Use Common Storage (RUCSA) has been defined for this system.

User response: No action is required.

AMTR13I

UNASSIGNED ASID FOR REPLY xx, IGNORED

Explanation: An outstanding reply was encountered that has no valid address space. This is an MVS system error.

User response: Reissue the command. If the problem persists, contact BMC Support.

AMTR14I

UNABLE TO LOCATE CONSOLE ADDRESS SPACE

Explanation: The console address space contains the operator reply elements (OREs) and console queue elements (CQEs) necessary to provide the REPLIES service. The REPLIES service terminates.

User response: Reissue the command and then contact BMC Support.

AMTR15I

SRB FAILED TO SCHEDULE

Explanation: An error occurred while attempting to schedule the cross-memory service routine necessary to support the REPLIES service.

User response: Reissue the command and then contact BMC Support.

AMTR18E

INVALID WQE DETECTED, REPLY IGNORED

Explanation: Self-explanatory.

User response: Reissue the command, and then contact BMC Support.

AMTR19E

INTERNAL ERROR IN REPLIES SERVICE

Explanation: This message should not occur.

User response: Contact BMC Support.

AMTR20I

Recovery Boost supported | not supported

Explanation: This provides information regarding the status of System Recovery Boost. The options are either supported or not supported. This is only an indication of software support for Recovery Boost, it is not an indication of hardware support. If Recovery Boost is not supported, no additional information is available or provided.

User response: No action required. This is an informational message.

AMTR21I

zIIP Boost disabled | enabled, Status=xxxxxxxx zIIP cores=xx


Explanation: This provides information regarding the status of zIIP Boost. The options are either "enabled" or "disabled". This is an indication of whether zIIP Boost is enabled via system option BOOST= in IEASYSxx. If zIIP Boost is enabled further information is provided to indicate the current status of zIIP Boost. The status options are Active or Inactive. For a status of active the number of transient zIIP cores configured online in support of zIIP Boost is also provided.

User response:This is an informational message.

AMTR22I

Speed Boost disabled | enabled, Status=Active | Inactive

Explanation: This provides information regarding the status of Speed Boost. The options are either enabled or disabled. This is an indication of whether Speed Boost is enabled via system option BOOST= in IEASYSxx. If Speed Boost is enabled further information is provided to indicate the current status of Speed Boost. The status options are Active or Inactive.

User response: This is an informational message.

AMTR23I

IPL Boost Inactive

Explanation: This message indicates that IPL Boost is inactive and has not been activated since IPL.

User response: This is an informational message.

AMTR24I

IPL Boost Active until mm/dd/yyyy at hh:mm:ss

Explanation: This message indicates that IPL Boost is currently active. Further information is provided indicating the date and time IPL Boost is scheduled to end. It is possible for IPL Boost to end earlier than this time due to error or customer action.

User response: No action required. This is an informational message.

AMTR25I

IPL Boost Ended on mm/dd/yyyy at hh:mm:ss | Rsn=reason

Explanation: This message indicates that IPL Boost was active at some time since IPL and completed. If IPL Boost ended due to timer expiration further information may be provided indicating the date and time IPL Boost ended. If IPL Boost ended for some other reason that reason is indicated in the Rsn= field. Possible reasons are:

Reason

Description

Timer

IPL Boost ended due to timer expiration, the date and time could not be determined.

Program

IPL Boost ended due to the action of a program.

Shutdown

IPL Boost ended due to initiation of system shutdown.

Error

IPL Boost ended due to error.

Unknown

The cause of IPL Boost termination could not be determined.

User response: This is an informational message.

AMTR26I

Shutdown Boost Inactive

Explanation: This message indicates that Shutdown Boost is inactive and has not been activated since IPL.

User response: This is an informational message.

AMTR27I

Shutdown Boost Active until mm/dd/yyyy at hh:mm:ss

Explanation: This message indicates that Shutdown Boost is currently active. Further information is provided indicating the date and time Shutdown Boost is scheduled to end. It is possible for Shutdown Boost to end earlier than this time due to error, customer action, or system shutdown.

User response: This is an informational message.

AMTR28I

Shutdown Boost Ended on mm/dd/yyyy at hh:mm:ss | Rsn=reason

Explanation: This message indicates that Shutdown Boost was active at some time since IPL and completed. If Shutdown Boost ended due to timer expiration further information may be provided indicating the date and time Shutdown Boost ended. If Shutdown Boost ended for some other reason that reason is indicated in the Rsn= field. Possible reasons are:

Reason

Description

Timer

Shutdown Boost ended due to timer expiration, the date and time could not be determined.

Program

Shutdown Boost ended due to the action of a program.

Shutdown

Shutdown Boost ended due to initiation of system shutdown.

Error

Shutdown Boost ended due to error.

Unknown

The cause of Shutdown Boost termination could not be determined.

User response: This is an informational message.

AMTR1AE

PLEASE DEFINE MODULE ASTXA1RP AS THE ASYNCHRONOUS SERVICE FOR REPLIES

Explanation: Module ASTXA1R1 was defined as an Asynchronous Service.

User response: Define module ASTXA1RP as an Asynchronous Service.

AMTR2AI

----------------------- Sorted Data --------------------------

Explanation: The tabular data following this message has been sorted according to the order implied by the second operand. Data above this line has not been sorted.

User response: No action is required.

AMTRASE

NO DSNAME SPECIFIED

Explanation: You did not specify a required data set name.

User response: Specify a data set name.

AMTREAI

PGM=RESOLVE is no longer supported for executing SYSPROG Services.

Explanation: The product RESOLVE was renamed several years ago to SYSPROG Services, making load module RESOLVE obsolete. The module was maintained until this time for compatibility to allow customers sufficient time to change their Job Control Statements and CLISTs. Due to the advent of IBM's restriction on the use of user-key CSA it is no longer possible to Compatibly retain the use of the obsolete name. RESOLVE terminates after issuing this message and message AMTERBI.

User response: Use the name SYSPROG in place of the name RESOLVE when invoking SYSPROG Services.

AMTREBI

Use PGM=SYSPROG instead.

Explanation: The product RESOLVE was renamed several years ago to SYSPROG Services, making load module RESOLVE obsolete. The module was maintained until this time for compatibility to allow customers sufficient time to change their Job Control Statements and CLISTs. Due to the advent of IBM's restriction on the use of user-key CSA it is no longer possible to Compatibly retain the use of the obsolete name. RESOLVE terminates after issuing this message and message AMTERAI.

User response: Use the name SYSPROG in place of the name RESOLVE when invoking SYSPROG Services.

AMTRP1I

ONE OR MORE REPLIES OUTSTANDING FOR x MINUTES

Explanation: The value x is the time interval for the test duration. The default value is five.

User response: No action is required.

AMTRP2I

jobname nn WTOR_text

Explanation: This informational message details the outstanding reply number, nn.

User response: No action is required.

AMTRP3I

ERROR DURING COLLECTION OF REPLIES

Explanation: This message should not occur.

User response: Contact BMC Support.

AMTRP4I

UNABLE TO LOCATE CONSOLE MEMORY

Explanation: This message should not occur.

User response: Contact BMC Support.

AMTRS9I

TOTAL : nnnnnnnn (nnnnM) nnnnnnnn

Explanation: This message summarizes all storage frames.

User response: No action is required.

 

Tip: For faster searching, add an asterisk to the end of your partial query. Example: cert*