Skip to Content

Editing an option set

You can edit the option sets by executing the product's CLIST or the LGCISPF CLIST. All methods invoke the same LGC dialog.

Before you begin

The DBC started task must be running and the LGC agents must be active.

To edit an option set

  1. On the Options Set panel, type E next to the option set that you want to edit and press Enter.

  2. Expand each section and review or change the values.

    Success

    Tip

    For repeatable sections, you can:

    • Enter I next to the section to insert a new section that uses all default values.
    • Enter R next to a section to duplicate the section with its current values. You can then edit the repeated section to create a unique section.

    Repeatable sections include a number in parentheses behind the section name.

    Warning

    Note

    While editing the option set, you might receive validation error messages if fields contain invalid entries. Validation errors change the filter setting to Filter: Invalid, and only fields that have validation errors are displayed. When you correct an validation error, the associated field is no longer displayed on the panel. When you have corrected all the validation errors, the filter reverts to its previous setting (for example, Filter: Required or Filter: Off).

    You can manually change the filters if you want to see all options. For more information about filtering, see Filtering-option-sets.

  3. Save your option set by pressing F3.

Example of working with default values for option sets

This example demonstrates how to create default values for a section in an option set. Doing so allows you to define your own default values so that whenever you insert new instances of a section, you will have fewer values to update.

The values that you specify for section defaults are used whenever you insert a new instance. If you change a value in a section default, any value in an instance that matched that value prior to the change is eligible for being updated to the new value. This process allows you to change the values in multiple instances of a section at once, without opening and closing each instance.

  1. Access the LGC panel for editing the option set (as described in Accessing-the-online-interface).

    The following figure shows an example of a panel for a new DOMPLEX option set used by the System and SQL Performance products.  Each product lists different options.

    Panel for a new option set

      File  Filter  Confirm  Help                                                  
    -----------------------------------------------------------------------------
                           DBCRIOPT - DOMPLEX FOR DBCRI101                         
    Command ===>                                                  Scroll ===> CSR  
                                                                                  
    Filter: Modified                                                    More:      
    + DOMPLEX Parameters               Parameters that apply to entire DOMPLEX     
    + Data Collector List (3)          Data Collector(DBC) subsystems in DOMPLEX   
    + DB2 Monitor List (16)            DB2 Sub-systems to be monitored             
    + OutGp DCID DspSize (9)           Output Groups - valid range: 001-256        
    ********************************* End of List ********************************
                                                                                  
                                                                                  
                                                                                  
                                                                                  
                                                                                  
                                                                                  
                                                                                  
                                                                                  
                                                                                  
                                                                                  
                                                                                  
    +/- expandable section (enter ? for action menu), > zoomable field
    Success

    Tip

    The number in parentheses behind the section name indicates the number of instances that exist for a section. Any section that has an instance count of 0 or more is eligible for using section default values. (In the example panel, the DOMPLEX Parameters section does not contain any instances.)

  2. To update section default values, type E next to the relevant section.

    The LGC interface displays a panel that allows you to define the default values pertinent to that section.

    For example, typing E next to DB2 Monitor List displays the panel shown in the following figure.

    Example panel for defining defaults

      File  Filter  Confirm  Help                                                  
    -----------------------------------------------------------------------------
    LGCP1001             DB2 Monitor List - Section Defaults                       
    Command ===>                                                  Scroll ===> CSR  
                                                                                  
    Filter: Off                                                         More:   +  
    DB2 Subsystem ID . . . . . . . . . . .  SSID                                   
    Is this a production DB2?. . . . . . .  N        (Y=Yes,N=No)                 
    Monitor with MAINVIEW for DB2 - DC . .  Y        (Y=Yes,N=No)
    Monitor with Pool Advisor/System Perf.  Y        (Y=Yes,N=No)                  
    Monitor with APPTUNE . . . . . . . . .  Y        (Y=Yes,N=No)                  
    Dynamic Explain plan name. . . . . . .  DAA111D1                               
    > DB2 IFCIDs to be traced automatically                                        
    > DB2 IFCIDs to be discarded                                                   
    > BMC IFCIDs to be discarded                                                   
    Class  2-In-DB2 elapsed timing info. .  Y        (Y=Yes,N=No)                  
    Class  3-DB2 suspend timing info . . .  Y        (Y=Yes,N=No)                  
    Class  5-Time spent doing IFI requests  Y        (Y=Yes,N=No)                  
    Class  7-DB2 events (packages, DBRMs).  Y        (Y=Yes,N=No)                  
    Class  8-Wait time for packages. . . .  Y        (Y=Yes,N=No)                  
    Class 10-Optional package detail data.  Y        (Y=Yes,N=No)                  
    Collect dynamic SQL stats in stmt cache N        (Y=Yes,N=No)                  
    Collect static SQL stats in stmt cache  N        (Y=Yes,N=No)                 
    + SQL Performance/APPTUNE options                                             
    ********************************* End of List ********************************

  3. Make the changes to the option set.

    For example, assume that all of the Class fields were changed to N and the previous value of Y matched the existing instances of the defined Db2 subsystems.

  4. Press F3 to save the changes and display the panel shown in the following figure.

    Apply Sections Defaults Updates

    --------------------- Apply Section Defaults Updates ----------------------
     LGCW1004                                                Changes applied   
    Updates to the model can be applied to the following 12 rows.            
                                                                            
     _ Enter '/' to select all rows or select individual rows in the list.   
                                                                            
       DB2 Monitor List                                           More:   +  
     _ DB2A           DB2 SSID                                               
     _ DB2B           DB2 SSID                                               
     _ DB2C           DB2 SSID                                               
     _ DB2D           DB2 SSID                                               
     _ DB2E           DB2 SSID                                               
     _ DB2F           DB2 SSID                                               
     _ DB2G           DB2 SSID                                               
     _ DB2H           DB2 SSID                                               
     _ DB2I           DB2 SSID                                               
     _ DB2J           DB2 SSID                                               
     _ DB2K           DB2 SSID                                               
     _ DB2L           DB2 SSID                                               
                                                                            
     Press END to update the selected rows.
  5. Take one of the following actions:
    • To change the value from Y to N for all instances, type / next to Enter '/' to select all rows or select individual rows in the list field.
    • To change the value from Y to N for only select instances, type / on the action lines next to those specific entries.

  6. Press F3 to save your changes.

Related topic

Working-with-option-sets


 

Tip: For faster searching, add an asterisk to the end of your partial query. Example: cert*

Common mainframe infrastructure 2021 release