Skip to Content

Control-M/EM PANFT.9.0.22.001

BMC Software is releasing Control-M/EM patch PANFT.9.0.22.001 to correct the following problems in Control-M/EM on Linux and Windows.

Information
Important

Verify that Control-M/EM 9.0.22 is installed before you install this patch. You do not need to install previous patches.

Corrected Problems

The following table describes the problems that are corrected in Control-M/EM PANFT.9.0.22.001.

Tracking Number

Description

CTM-12642Control-M Web becomes slow or unresponsive when jobs with large numbers of predecessor and successor jobs load into a viewpoint or workspace.
CTM-12700The correct number of jobs does not appear in the Extreme Peaks Usage report in Control-M Reports.
CTM-12727High Availability automatic failover does not occur (the primary Control-M/EM does not failover to the secondary Control-M/EM) when you run the stop_all command to stop the primary Control-M/EM.
CTM-12813The GUI Server (GSR) does not create audit records for z/OS job modifications when the auditAllDefinitionChanges  (CCM Name: AuditFullDefinitionChanges) Control-M/EM system parameter is set to 1.
CTM-12832

Control-M Web fails to correctly load private viewpoints that are opened on historical data and that contain filter presets. The following error message appears:

Internal server error

CTM-12833Embedded Tomcat has been upgraded to version 9.0.99 in the Control-M Web Service to address security vulnerabilities.

Installing Control-M/EM Patch PANFT.9.0.22.001 on Linux

This procedure describes how to install Control-M/EM patch PANFT.9.0.22.001 on Linux.

Information
Important
  • You must install this patch on every host where Control-M/EM server is installed.
  • In a High Availability environment, you must install this patch on active and non-active hosts.​

Before You Begin

  • Verify that Control-M/EM 9.0.22.000 is installed before you install this patch.

Begin

  1. Log in to the account where Control-M/EM is installed.
  2. Download the installation package from Control-M/EM 9.0.22 Patches.
  3. Save the downloaded installation package to a temporary directory on your local hard drive (not a network drive), and extract the package.
  4. In a High Availability environment, stop the Control-M/EM Configuration Agent on the non-active environment to avoid automatic failover.
  5. From the temporary directory, run the following command:
    ./install_patch.sh
    The installation file shuts down your Control-M/EM components, installs the patch, and restarts the components.
  6. Follow the on-screen instructions until the installation is complete.
    The installation file shuts down your Control-M/EM components, installs the patch, and restarts the components.
  7. In a High Availability environment, do the following:
    1. Verify that the Control-M/EM Configuration Agent on the non-active environment is up after the installation completes.
    2. Repeat the entire procedure on the non-active environment.

Installing Control-M/EM Patch PANFT.9.0.22.001 on Windows

This procedure describes how to install Control-M/EM patch PANFT.9.0.22.001 on Windows.

Information
Important
  • You must install this patch on every host where Control-M/EM server is installed.
  • In a High Availability environment, you must install this patch on active and non-active hosts.​

Before You Begin

  • Verify that Control-M/EM 9.0.22.000 is installed before you install this patch.

Begin

  1. Log in to the account where Control-M/EM is installed.
  2. Download the installation package from Control-M/EM 9.0.22 Patches.
  3. Save the downloaded installation package to a temporary directory on your local hard drive (not a network drive), and extract the package.
  4. In a High Availability environment, stop the Control-M/EM Configuration Agent on the non-active environment to avoid automatic failover.
  5. From the temporary directory, run the following command:
    install_patch.bat
    The installation file shuts down your Control-M/EM components, installs the patch, and restarts the components.
  6. Follow the on-screen instructions until the installation is complete.
    The installation file shuts down your Control-M/EM components, installs the patch, and restarts the components.
  7. In a High Availability environment, do the following:
    1. Verify that the Control-M/EM Configuration Agent on the non-active environment is up after the installation completes.
    2. Repeat the entire procedure on the non-active environment.

Uninstalling Control-M/EM Patch PANFT.9.0.22.001 from Linux

This procedure describes how to uninstall Control-M/EM patch PANFT.9.0.22.001 from Linux.

Information
Important

In a High Availability environment, you must uninstall this patch from active and non-active hosts.​

Begin

  1. Log in to the account where Control-M/EM is installed.
  2. In a High Availability environment, stop the Control-M/EM Configuration Agent on the non-active environment to avoid automatic failover.
  3. Navigate to the following directory:
    <EM_HOME>/Patches/PANFT.9.0.22.001
  4. Run the following command:
    uninstall_patch.sh
    The uninstall file shuts down your Control-M/EM components, uninstalls the patch, and restarts the components.
  5. In a High Availability environment, run the following command on the non-active environment:
    uninstall_patch.sh
    The uninstall file shuts down your Control-M/EM components, uninstalls the patch, and restarts the components.
    Verify that the Control-M/EM Configuration Agent on the non-active environment is up after the installation.

Uninstalling Control-M/EM Patch PANFT.9.0.22.001 from Windows

This procedure describes how to uninstall Control-M/EM patch PANFT.9.0.22.001 from Windows.

Information
Important

In a High Availability environment, you must uninstall this patch from active and non-active hosts.​

Begin

  1. Log in to the account where Control-M/EM is installed.
  2. In a High Availability environment, stop the Control-M/EM Configuration Agent on the non-active environment to avoid automatic failover.
  3. Navigate to the following directory:
    <EM_HOME>\Patches\PANFT.9.0.22.001
  4. Run the following command:
    uninstall_patch.bat
    The uninstall file shuts down your Control-M/EM components, uninstalls the patch, and restarts the components.
  5. In a High Availability environment, run the following command on the non-active environment:
    uninstall_patch.bat
    The uninstall file shuts down your Control-M/EM components, uninstalls the patch, and restarts the components.
    Verify that the Control-M/EM Configuration Agent on the non-active environment is up after the installation.

 

Tip: For faster searching, add an asterisk to the end of your partial query. Example: cert*

Control-M 9.0.22