Unsupported content This version of the documentation is no longer supported. However, the documentation is available for your convenience. You will not be able to leave comments.

Deploying .NET

The following sections discuss how to deploy .NET. Each section focuses on a specific version of .NET.

Deploying .NET 4.0

  1. Package your dotnetversion.exe as a custom software deployment (for example: dotNetFx40_Full_x86_x64.exe)
    DotNetPackage.png

  2. In the Install command field, enter the following command:

    start /wait ??SOURCE?? /q /norestart

    Note

    Do not enclose ??SOURCE?? in quotes. If you do not remove the " " quotes, the installation will fail, as the quotes impact the /q that follows.

Deploying .NET 3.5 SP1 (Windows 2008 R2)

.Net is already packaged with Windows 2008 R2. Therefore, it has to be installed as a Role instead of as an executable, similar to IIS.

start /w dism /online /enable-feature /FeatureName:NetFx3

Note

This command is case-sensitive for the package name. Ensure that it is entered correctly as NetFx3.

Deploying .NET 3.5

The following sample script can be used to perform a full installation of .NET Framework 3.5. For more information about this sample script, see http://msdn.microsoft.com/en-us/library/cc160717.aspx. This script assumes that you are packaging dotnetfx35.exe and deploying it to c:\tmp\stage.

set WORKFOLDER=c:\tmp\stage
set dotNetFX35build=%WORKFOLDER%\dotnetfx35.exe
echo Creating Admin Install points for NETFX3 %PROCESSOR_ARCHITECTURE%

REM Create folders where work will be done
md %WORKFOLDER%\ext
md %WORKFOLDER%\AIP
md %WORKFOLDER%\logs
pushd %WORKFOLDER%

REM Extract the files from the NETFX35 redist SFX
call dotnetfx35.exe /q /x:%WORKFOLDER%\ext

REM ------------------------------------------------------------
REM create the MSXML6 x86 admin install point
md %WORKFOLDER%\AIP\MSXML6_x86
call msiexec /a %WORKFOLDER%\ext\wcu\dotNetFramework\dotNetFX30\x86\msxml6.msi /qb /l*v %WORKFOLDER%\logs\MSXML6_x86.log Targetdir=%WORKFOLDER%\AIP\MSXML6_x86

REM create the MSXML6 x64 admin install point
md %WORKFOLDER%\AIP\MSXML6_x64
call msiexec /a %WORKFOLDER%\ext\wcu\dotNetFramework\dotNetFX30\x64\msxml6.msi /qb /l*v %WORKFOLDER%\logs\MSXML6_x64.log Targetdir=%WORKFOLDER%\AIP\MSXML6_x64

REM ------------------------------------------------------------
REM create the RGBRAST x86 admin install point
md %WORKFOLDER%\AIP\RGBRAST_x86
call msiexec /a %WORKFOLDER%\ext\wcu\dotNetFramework\dotNetFX30\RGB9RAST_x86.msi /qb /l*v %WORKFOLDER%\logs\RGBRAST_x86.log REBOOT=ReallySuppress Targetdir=%WORKFOLDER%\AIP\RGBRAST_x86

REM create the RGBRAST x64 admin install point
md %WORKFOLDER%\AIP\RGBRAST_x64
call msiexec /a %WORKFOLDER%\ext\wcu\dotNetFramework\dotNetFX30\RGB9RAST_x64.msi /qb /l*v %WORKFOLDER%\logs\RGBRAST_x64.log REBOOT=ReallySuppress Targetdir=%WORKFOLDER%\AIP\RGBRAST_x64

REM ------------------------------------------------------------
REM Extract NETFX 35 x86 components
md %WORKFOLDER%\ext\netfx35_x86
call %WORKFOLDER%\ext\wcu\dotNetFramework\dotNetFX35\x86\netfx35_x86.exe /q /x: %WORKFOLDER%\ext\netfx35_x86

REM Extract NETFX 35 x64 components
md %WORKFOLDER%\ext\netfx35_x64
call %WORKFOLDER%\ext\wcu\dotNetFramework\dotNetFX35\x64\netfx35_x64.exe /q /x: %WORKFOLDER%\ext\netfx35_x64

REM ------------------------------------------------------------
REM create the NETFX35 x86 admin install point
md %WORKFOLDER%\AIP\netfx35_x86
call msiexec /qb /a %WORKFOLDER%\ext\netfx35_x86\vs_setup.msi USING_EXUIH=1 REBOOT=ReallySuppress /l*v %WORKFOLDER%\logs\netfx35_x86.log TARGETDIR=%WORKFOLDER%\AIP\netfx35_x86

REM create the NETFX35 x64 admin install point
md %WORKFOLDER%\AIP\netfx35_x64
call msiexec /qb /a %WORKFOLDER%\ext\netfx35_x64\vs_setup.msi USING_EXUIH=1 REBOOT=ReallySuppress /l*v %WORKFOLDER%\logs\netfx35_x64.log TARGETDIR=%WORKFOLDER%\AIP\netfx35_x64


REM ------------------------------------------------------------
REM create the NETFX20 x86 SP1 admin install point

REM 2.0 SP1 files location
Set fx20=%WORKFOLDER%\ext\wcu\dotNetFramework\dotNetFX20\
md %WORKFOLDER%\AIP\NETFX20_x86
call msiexec /a %fx20%netfx20a_x86.msi /update %fx20%ASPNET.msp;%fx20%CLR.msp;%fx20%CRT.msp;%fx20%NetFX_CA.msp;%fx20%NetFX_Core.msp;%fx20%NetFX_Other.msp;%fx20%PreXP.msp;%fx20%WinForms.msp;%fx20%DW.msp USING_EXUIH=1 REBOOT=ReallySuppress /l*v %WORKFOLDER%\logs\netfx20_x86.log TARGETDIR=%WORKFOLDER%\AIP\NETFX20

REM create the NETFX20 x64 SP1 admin install point
md %WORKFOLDER%\AIP\NETFX20_x64
call msiexec /a %fx20%Netfx20a_x64.msi /update %fx20%ASPNET_64.msp;%fx20%CLR_64.msp;%fx20%CRT_64.msp;%fx20%DW_64.msp;%fx20%NetFX_Core_64.msp;%fx20%NetFX_Other_64.msp;%fx20%WinForms_64.msp;%fx20%ASPNET.msp;%fx20%CLR.msp;%fx20%CRT.msp;%fx20%NetFX_CA.msp;%fx20%NetFX_Core.msp;%fx20%NetFX_Other.msp;%fx20%PreXP.msp;%fx20%WinForms.msp;%fx20%DW.msp USING_EXUIH=1 REBOOT=ReallySuppress /l*v %WORKFOLDER%\logs\netfx20_x64.log TARGETDIR=%WORKFOLDER%\AIP\NETFX20_x64


REM ------------------------------------------------------------
REM create the NETFX30 SP1 x86 admin install point

REM 3.0 SP1 files location
Set fx30=%WORKFOLDER%\ext\wcu\dotNetFramework\dotNetFX30\
md %WORKFOLDER%\AIP\NETFX30_x86
call msiexec /a %fx30%netfx30a_x86.msi /update %fx30%WCF.msp;%fx30%WCS.msp;%fx30%WF.msp;%fx30%WPF1.msp;%fx30%WPF2.msp;%fx30%WPF_Other.msp;%fx30%XPS.msp;%fx30%WF_32.msp;%fx30%WPF2_32.msp;%fx30%WPF_Other_32.msp USING_EXUIH=1 REBOOT=ReallySuppress /l*v %WORKFOLDER%\logs\netfx30_x86.log TARGETDIR=%WORKFOLDER%\AIP\NETFX30_x64

REM create the NETFX30 SP1 x64 admin install point
md %WORKFOLDER%\AIP\NETFX30_x64
call msiexec /a %fx30%netfx30a_x64.msi /update %fx30%WCF.msp;%fx30%WCS.msp;%fx30%WF.msp;%fx30%WPF1.msp;%fx30%WPF2.msp;%fx30%WPF_Other.msp;%fx30%XPS.msp;%fx30%WCF_64.msp;%fx30%WCS_64.msp;%fx30%WF_64.msp;%fx30%WPF1_64.msp;%fx30%WPF2_64.msp;%fx30%WPF_Other_64.msp USING_EXUIH=1 REBOOT=ReallySuppress /l*v %WORKFOLDER%\logs\netfx30_x64.log TARGETDIR=%WORKFOLDER%\AIP\NETFX30_x64

 

Tip: For faster searching, add an asterisk to the end of your partial query. Example: cert*