Configuration roadmap for continuous compliance for networks
This topic provides a high-level description of the configuration tasks required to implement the BMC Continuous Compliance for Networks solution, part of Compliance Automation.
This topic provides the following information:
Before you begin
Ensure that you have completed the installation tasks described in Installation-roadmap-for-continuous-compliance-for-networks.
Configuration roadmap
The following table lists the configuration tasks that are required to implement the Continuous Compliance for Networks workflows, and provides pointers to publications with detailed instructions.
Task | Product involved | Description and reference |
|---|---|---|
Step 1: Configure BMC Remedy ITSM | BMC Remedy ITSM | Do the following:
|
Step 2: Configure and enable the required adapters | BMC Atrium Orchestrator | Use Grid Manager to complete the configuration of the following required adapters:
|
Step 3: Activate and configure the required modules using Grid Manager | BMC Atrium Orchestrator | Before you can use the BMC Continuous Compliance for Network Automation solution, ensure that the modules are properly integrated to work with the BMC Remedy ITSM system. You must activate and configure the following modules:
|
Step 4: Configure BMC Network Automation to support the solution | BMC Network Automation |
Where to go next
The following topics provide details for configuring the solution:
After you have installed and configured the BMC Continuous Compliance for Network Automation solution, you can execute the Continuous Compliance for Networks use cases.