Universe objects

Attribute Name

Displays name of the attribute.

Attribute Unit Name

Displays unit name of the attribute.

Attribute Unique Name

Displays unique name of the attribute.

Attribute ID

Unique identifier of an attribute.

Attribute Status

Flag field which displays status of the attribute. Indicates whether the device is Active or Deleted.

Attribute Deleted Time

Displays attribute deleted time.

Enter/Select Attribute Names

Condition to prompt for multiple attribute names.

Component Name

Displays name of the component.

Component Class

Displays classname of the component.

Component ID

Displays component ID of the component.

Status

Displays status of the component.

Impact Manager

Displays cell name of the component.

Site

Displays value of the Site slot of the component.

Site Group

Displays value of the Site Group slot of the component.

Type

Displays type of the component.

Category

Displays category of the component.

Manufacturer Name

Displays value of the Manufacturer Name slot of the component.

Region

Displays value of the Region slot of the component.

Department

Displays value of the Department slot of the component.

Company

Displays value of the Company slot of the component.

City

Displays value of the City slot of the component.

Domain

Displays value of the Domain slot of the component.

Model

Displays value of the Model slot of the component.

Owner Name

Displays value of the OwnerName slot of the component.

Owner Contact

Displays value of the OwnerContact slot of the component.

Description

Displays description of the Component

Primary Capability

Displays value of the Primary Capability slot of the component.

Impacted Areas

Displays value of the Impacted Areas slot of the component.

Impact Cost Per Sec

Displays Cost due to Component Loss.

Impact Cost Unit

Displays monetary unit of loss for loss measurement.

Insert Type

Displays insert type of the component.

Is Virtual

Displays value of the IsVirtual slot of the component.

Create Date

Displays component create date.

OS Name

Displays Component Operating System name.

OS Type

Displays Component Operating System type.

OS Product Suite

Displays Component Operating System product suite.

Supported By

Displays value of the SupportedBy slot of the component.

System Environment

Displays value of the SysEnvironment slot of the component.

System Name

Displays value of the SystemName slot of the component.

System Role

Displays value of the SystemRole slot of the component.

Version Number

Displays value of the VersionNumber slot of the component.

Extended Component Slot Name

Displays additional slot names for a component.

Extended Component Slot Names

Displays Extended Component Slot Names

Extended Component Slot Value

Displays value of additional slot names for a component.

Extended Component Slot Values

Displays Extended Component Slot Values

Enter/Select Component Slot Names

Displays the available slot names for a component.

Enter/Select Component Name

Condition to prompt user for single Component name for selected Component classes

Enter/Select Component Class

Condition to prompt user for multiple Component class names.

Summarized Flag

Indicates whether the component needs to be summarized (1 = true, 0 = false).

Last Summarized Date

Displays the date/time when the component was last summarized

Component Configuration

Displays component configuration

Forward Summarization Date

Displays the date/time when the component was forward summarized

Component Slot Name

Displays the available slot names for a component.

Component Slot Value

Displays the available slot values for a component.

Slot Change Time

Displays the time when the Component Slot is Changed.

Bppm Server Name

Displays the name of the BPPM server.

Device Name

Displays the name of the host on which the event occurred.

Device IP Address

Displays the address of the host on which the event occurred.

Device Server Type

Displays type of the device (For example, Default, VM, and VC).

Device Type

Displays the type of a device (For example, Server, RemoteAgent, Router)

Device Description

Displays description about the device.

Device Status

Flag field which displays status of the device, indicates whether the device is Active or Deleted.

Device Unique Name

Displays the unique name of the device.

Device Full Name

Displays the full name of the device.

Parent Device Name

Displays the parent device name of the device.

Parent Device IP

Displays the parent device IP address of the device.

Device OS Name

Displays the Operating system name of the device.

Device OS Version

Displays the Operating system version of the device.

Device ID

Displays ID of the device.

Device MCUDID

Displays Machine Universal Descriptor ID of the device.

Device Discovered Time

Displays the time when the device was discovered.

Device Deleted Time

Displays the time when the device was deleted.

Device CMDB Parent Instance ID

Displays the device CMDB Parent Instance ID.

Enter/Select BPPM Server Names

Condition to prompt for multiple BPPM server names.

Enter/Select Device Names

Condition to prompt for multiple device names.

Enter/Select Device Name

Condition to prompt for single device name.

Select Device Status

Condition to prompt for multiple device status.

CMDB Level1

Displays configured value of first level CMDB hierarchy.

CMDB Level2

Displays configured value of second level CMDB hierarchy.

CMDB Level3

Displays configured value of third level CMDB hierarchy.

CMDB Level4

Displays configured value of fourth level CMDB hierarchy.

CMDB Level1 - Device

Displays device name of a first level CMDB hierarchy.

CMDB Level2 - Device

Displays device name of a second level CMDB hierarchy.

CMDB Level3 - Device

Displays device name of a third level CMDB hierarchy.

CMDB Level4 - Device

Displays device name of a fourth level CMDB hierarchy.

Device Location

Displays the location of the device.

Device Department

Displays the department of the device.

Device Building

Displays the building of the device.

Device Owner

Displays the owner of the device.

Device Tag Status

Displays device tag status

Device Tags Deleted Time

Displays the time when device tags were deleted

Organization Name

Displays the value of Organization Name slot of the component.

Organization ID

Displays the value of Organization ID slot of the component.

Monitor Type

Displays name of the monitor type.

Monitor Type Unique Name

Displays unique name of the monitor type

Monitor Type ID

Unique identifier of a monitor type.

Enter/Select Monitor Types

Condition to prompt for multiple monitor types.

Monitor Status

Flag field which displays status of the monitor type, indicates whether the device is Active or Deleted.

Monitor Deleted Time

Displays the time when the monitor was deleted.

Monitor Instance

Displays name of the instance.

Monitor Instance ID

Unique identifier of an instance.

Enter/Select Monitor Instances

Condition to prompt for multiple monitor instances.

Monitor Instance Status

Flag field which displays status of the monitor instance. Indicates whether the device is Active or Deleted.

Event ID

Unique Event Identifier

Event Host

Displays the host associated with the event

Event Host Class

Displays type of host. This field is important for implementing generic actions, such as rebooting a computer on which a problem has occurred. In the background, a generic action can be translated into a specific action based on this field.

Event Class

Displays Event Class. For example, Abnormality, Alarm

Event Status

Display status of an event.

Event Severity

Indicates the seriousness of the event.

Event Priority

Determines which event requires action before the other.

Event Message

Displays a short description of the reason for the event.

Event Category

Displays category of an event.

Event Sub Category

Displays sub category of an event.

Event Owner

Displays the current user assigned to the event.

Event Location

Displays the location assigned to the event.

Application

Displays Event Application

Origin Severity

Displays severity as given by the mc_origin slot

Impact Manager Cell Address

Displays cell address of the impact manager monitoring the component.

Event Origin

Event management systems that is closest to the source of the event as possible. For example, if an event originates form an agent, is forwarded to HP OpenView IT / Operations, and is then received by BMC Impact Manager, the name of the agent would be the mc_origin, and the name of the HP ITO instance would be the mc_tool.

Event Origin Class

Identifies the event management system type.

Event Object

Displays sub-component of the host to which the event is related. For example, it could be the name of the disk on which the event is reporting the problem.

Event Object Class

Displays the class of an object. If the object class cannot be derived from the original event, it should be filled in during enrichment.

Event Parameter

Name of the metric or property that went into alarm or that triggered the event.

Event Parameter Value

Displays the parameter value.

Tool

Displays the tool_class value.

Tool Class

Displays a user-defined categorization of the tool reporting the event. For example, the tool_class value for an SNMP adapter could be SNMP. And the tool_class value for an NT Event Log Adapter might be NT_EVENT_LOG.

Tool Class Address

Displays the address of the tool reporting the event.

Event MC Service

Displays business service of the reporting event.

Extended Slot Name

Extended Event Slot Name that was created.

Extended Slot Value

Displays the Extended Event Slot Value.

Event Action Count

Number of actions performed on the event.

Event Repeat Count

Number of copies received from this event.

Event Original Severity

Records the original severity of the event to determine if the event’s severity has been modified.

Event Duration

Elapsed time, in seconds from event creation to the time the event was closed.

Event Original Priority

Records the original priority of the event upon insertion to the cell, which is needed to determine if an event has been escalated or de-escalated.

Event Administrator

Identification of the user that last modified the event, as user@host or package:rulename.

Event Last Closed By Response

Displays user which has closed the event.

Event Last Closed Response Time

Displays date-time when the event got closed .

Enter/Select Priority

Condition to prompt user for single event priority levels.

Enter/Select Severity

Condition to prompt user for single event severity levels.

Original Priority IN Number

Displays the events original priority IN number.

Event Account

Displays event account

Event Object Owner

Displays event owner

Event MC Notification History

Displays event notification history

Event MC Tool Sev

Displays severity as provided by mc_tool 

Event Origin Key

Unique key that the originating tool uses to enumerate the event. In case of a two-layer implementation, mc_origin_key might have the same value as the mc_tool_key. 

Severity ID

Displays the system generated unique ID for Severity.

Priority ID

Displays the system generated unique ID for Priority.

Average Duration between Event From Open and Closed (Mins)

Displays the mean duration for events from open to closed, in minutes. 

Number of Acknowledged Events

Displays the total number of acknowledged events

Number of Abnormal Events

Displays the total number of abnormal events

Event History Status

Status value of the event.

Event Status Change Time

Event Status date time.

Event Status Change Operator

Operator who changed the status of an event.

Event Status GUID

System generated Status Id

Total Number Of Events

Displays number of total Events

Number Of Open Events

Displays the total number of Opened Events

Number Of Closed Events

Displays the total number of Closed Events

Number Of Critical Events

Displays the total number of Critical Events

Number Of Major Event

Displays the total number of Major Events

Number Of Minor Event

Displays the total number of Major Events

Number Of Warning Event

Displays the total number of Warning Events

Number Of Info Events

Displays the total number of Info Events

Number Of OK Events

Displays the total number of OK Events

Number Of Priority 2 Events

Displays the total number of Priority 2 Events

Number Of Priority 1 Events

Displays the total number of Priority 1 Events

Number Of Priority 3 Events

Displays the total number of Priority 3 Events

Number Of Priority 4 Events

Displays the total number of Priority 4 Events

Number Of Priority 5 Events

Displays the total number of Priority 5 Events

Event Response Time (Hrs) - Arrival to Closed (Hrs)

Event Response time is the difference between open time and closed time.

Event Response Time (Mins) - Arrival to Closed (Mins)

Event Response time is the difference between open time and closed time.

Event Notes

List of free text annotations added to the event. The contents of this slot is implementation-dependent. Rules or users should not rely on a particular value in this slot.

Event Notes Time

Displays when an event note has been written by operator.

Event Notes Operator

Displays who wrote the notes on an event.

Event Notes Guid

System generated Unique ID for each notes on events

Event Operation

The slot containing a list of operation history entries.

Event Operation Type

The slot containing a list of operation history entries.

Event Operation Time

Displays time when an operation is performed on an event.

Event Operation Arguments

Event Operation Arguments.

Event Operation Operator

Displays the name that operated on an event.

Enter/Select Operation Operator Name

Condition to prompt user for event operations Operator.

Event Operation Guid

System generated Unique ID for each operation

Event Reception Date

Displays the date when the event occurred.

Event Arrival Date

Date when the event arrived at the BMC Impact Manager network at either an adapter or a cell.

Event Incident Date

Displays the Event Incident Report Date.

Event Modification Date

Displays the Event Date Modification.

Event Local Reception Date

Displays the Event Local Reception Date

Event Closed Date

Displays the Event Closed Date.

Event Reception Date - Daily Date

Date that the event was received.

Event Date Range and Interval

Condition to prompt for Event Reception Interval size with date range.

Event Date Range

Condition to prompt Date range for Event Reception date time.

Event Last Closed Response Time - Daily Date

Displays date when the event got closed.

INCIDENT ID

Displays Incident ID.

INCIDENT STATUS

Displays Incident status.

INCIDENT PRIORITY

Displays Incident priority.

INCIDENT SUBMITTER

Displays who created this Incident.

INCIDENT ASSIGNEE

Displays who assigned this Incident.

INCIDENT DATE TIME

Displays time when the Incident was generated.

INCIDENT ACK EVENT ID

Event ID of the Incident Information Event

EVENT INCIDENT ID

Displays Incident ID for an event.

Event Interval Size

Displays Daily or Weekly or Monthly or Quarterly event reception date based on user input

Event Slot Name List

Displays list of slot for an event.

Event Host Class-Host

Displays Host on basis of selected host class of an event.

Event Tool Class-Tool

Displays Tool on basis of selected Tool class of an event.

Event Origin Class-Origin

Displays origin on basis of selected origin class of an event.

Event Severity Bucket

Event Severity Bucket for CRITICAL, MAJOR, MINOR and Other Events

Event Object Class-Object

Displays object on basis of selected object class of an event.

Custom Slot Name-Value

Displays extended slot value on basis of selected extended slot name.

Event Detail Slot Name List

Event Detail Slot Name List.

Event Class For Object

Display event class of the selected object.

Event Class For Service

Display event class of the selected service.

Event Class For Tool

Display event class of the selected tool.

Event Class For Origin

Display event class of the selected origin.

Event Class For Host

Display event class of the selected host.

Event Class For Locations

Display event class of the selected location.

Extended Slot Name - Value

Display extended slot value for selected extended slot.

Event MC Service - Event Class

Display event class of the selected service.

Event MC Location - Event Class

Display event class of the selected location.

Event MC Origin Class - Origin

Displays origin on basis of selected origin class of an event.

Event MC Origin Class-Origin-Class

Displays origin on basis of selected origin class and event class of an event.

Event MC Host Class - Host

Displays Host on basis of selected host class of an event.

Event MC Host Class-Host-Event Class

Displays host on basis of selected host class and event class of an event.

Event MC Object Class - Object

Displays object on basis of selected object class of an event.

Event MC Object Class-Object-Event Class

Displays object on basis of selected object class and event class of an event.

Event MC Tool Class - Tool

Displays Tool on basis of selected Tool class of an event.

Event MC Tool Class - Tool - Class

Displays Tool on basis of selected tool class and event class of an event.

Event Component Name

Displays the name of the active component.

Enter/Select Event Class For Object

Prompt to select multiple event class.

Event First Response Time

Displays first operation time of an event.

Event First Response User

Displays who performed the first operation on an event.

Response Time2

Displays the First Response status time of an event in minutes

Response Time1

Displays the Operation Response time of an event in minutes

Response Time

Displays the Response Time of an event in minutes

Min Response Time

Displays the Minimum Response Time for all events occurred

Max Response Time

Displays the Maximum Time taken to respond to an event

Status Component ID

The auto generated unique ID for each component

Status

Displays the component status

Status Type

Displays the Component Status change type.

Status Change Incident Date

Displays the incident date on which the component status has changed.

Change Number

Number of times the component status has been changed.

Manual Comment

Displays the Manual comment provided during status change.

Manual User

Displays the user who manually changed the status of the component

Schedule

Displays schedule of the impacted component.

Cost

Displays the cost associated with component loss.

Insert Date

Component Status change insert date

Status Incident Date

Displays status incident date

Status Change Interval

Displays status change interval

Component Status

Displays status of the impacted component

Latest Incident Date

Displays latest incident date

Enter Component Incident Date Period

Prompt for Component Date range.

Status ID

Component status ID

Number Of Impacted Components

Count of all Events with Status - Impacted

Number Of Unavailable Components

Count of all Events with Status - Unavailable.

Number Of Minor Components

Count of all Events with Status - Minor.

Number Of Warning Components

Count of all Events with Status - Warning.

Number Of Info Components

Count of all Events with Status - Info.

Number Of OK Components

Count of all Events with Status - Events.

Number Of Unknown Components

Count of all Events with Status - Unknown.

Number Of Blackout Components

Count of all Events with Status - Blackout.

Count Of Events

Total number of events used per components in reports

Availability End Status

Component end Status at that particular time.

Availability End Schedule

Displays the End Schedule of the component.

Availability Interval Date

Displays the availability Interval Date.

Availability Interval Size

Displays Availability Daily or Weekly or Monthly or Quarterly begin date based on user input.

Availability Uptime

In last one hour up for how many minutes.

Availability Downtime

In last one hour down for how many minutes.

Availability Value

Ratio of Hourly uptime to Hourly uptime and hourly downtime.

Availability Rolling Uptime

Displays the rolling uptime of the component.

Availability Rolling Downtime

Displays the rolling downtime of the component.

Availability Rolling Value

Ratio of Rolling uptime to Rolling uptime and Rolling downtime.

Availability Uptime (Minutes)

Displays Availability Uptime in Minutes.

Availability Downtime (Minutes)

Displays Availability Downtime in Minutes.

Availability %

Displays Availability value in percentage.

Enter Availability Period and Interval

Condition to prompt user for Availability Interval Size.

Enter Availability Period

Condition to prompt user for start date and end date to compare with Availability Interval Date.

Losses End Cost

End cost due to component losses.

Losses End Status

Component end status at that particular time.

Losses Interval Date

Displays the Losses Interval Date.

Losses Interval Size

Displays Losses Daily or Weekly or Monthly or Quarterly begin date based on user input.

Losses Value

The down time/cost of the component in one hour.

Enter Losses Period and Interval

Condition to prompt user for Losses Interval Size.

Enter Losses Period

Condition to prompt user for start date and end date to compare with Losses Interval Date.

MTTR End Status

Component end status at that particular time.

MTTR End Schedule

Component end schedule at that particular time.

MTTR Interval Date

Displays the MTTR Interval Date.

MTTR Interval Size

Displays MTTR Daily or Weekly or Monthly or Quarterly begin date based on user input.

MTTR Repairs

The number of repairs within the hourly interval under consideration.

MTTR Uptime

The Up time within the hourly interval under consideration.

MTTR Repaired Downtime

The Down time for which a Repair has been found within the hourly interval under consideration

MTTR UnRepaired Downtime

State (Down) at that time (hr) and the amount of time down till the current time. Recorded when component goes down.

MTTR Value

Ratio of Hourly failed uptime to hourly failures.

Repairs

Displays the Hourly Repairs.

MTTR

Displays the ratio of hourly repaired downtime to hourly repairs.

MTTR Rolling Uptime

The rolling Up time within the interval under consideration

MTTR Rolling Repaired Downtime

The Down time for which a Repair has been found within the time interval under consideration.

MTTR Rolling Value

Ratio of rolling repaired downtime to rolling repairs for component.

MTTR Rolling Repairs

The number of repairs within the total interval under consideration.

MTTR Repaired Downtime (minutes)

Displays MTTR Repaired Downtime in minutes.

Rolling MTTR (minutes)

Displays Rolling MTTR Value in Minutes.

MTTR Last Significant State

State (Up/Down) at that time. (LastSigState: The last significant state)

MTTR Pattern In Service

Pattern in service (0/1) at that time.

Enter MTTR Period and Interval

Condition to prompt user for MTTR Interval Size.

Enter MTTR Period

Condition to prompt user for start date and end date to compare with MTTR Interval Date.

MTBF End Status

Component end status at that particular time.

MTBF End Schedule

Component end schedule at that particular time.

MTBF Interval Date

Displays the MTBF Interval Date.

MTBF Interval Size

Displays MTBF Daily or Weekly or Monthly or Quarterly begin date based on user input

MTBF Failed Uptime

The Up time for which a Failure has been found within the hourly interval under consideration.

MTBF Unfailed Uptime

State (Up) at that time (hr). How much time up till now. Recorded when component goes up. (Ignored to be considered as up if previously up and down if previously down if time (hr) falls in Ignored area.) (UnfailedUptime: The Up time for which a Failure has not yet been detected).

MTBF Downtime

The down time for which a Failure has been found within the hourly interval under consideration.

MTBF Failures

Displays Hourly Failures.

MTBF Value

Ratio of Hourly failed uptime to hourly failures.

Ever Repaired

Displays if component has ever been repaired.

MTBF Rolling Failed Uptime

The Up time for which a Failure has been found within the interval under consideration.

MTBF Rolling Downtime

The down time for which a Failure has been found within the interval under consideration.

MTBF Rolling Failures

The number of Failure patterns found within the interval under consideration.

MTBF Rolling Value

Ratio of Rolling failed uptime to Rolling failures.

MTBF

Displays MTBF Value.

MTBF Last Significant State

Displays the last significant state of the component.

MTBF Pattern In Service

Displays the pattern in service for the component.

MTBF Failed Uptime(minutes)

Displays Hourly Failed Uptime in minutes.

Rolling MTBF (minutes)

Rolling MTBF in minutes.

Failed Uptime (minutes)

The Up time for which a Failure has been found within the hourly interval under consideration in minutes.

Enter MTBF Period and Interval

Condition to prompt user for MTBF Interval Size.

Enter MTBF Period

Condition to prompt user for start date and end date to compare with MTBF Interval Date.

MTBSI End Status

Component end status at that particular time.

MTBSI End Schedule

Component end schedule at that particular time.

MTBSI Interval Date

Displays the MTBSI Interval Date.

MTBSI Interval Size

Displays MTBSI Daily or Weekly or Monthly or Quarterly begin date based on user input

Completed Service Impact Uptime

The total Up time that falls within an occurrence of a SI

Completed Service Impact Downtime

The total Down time that falls within an occurrence of a Service Impact

Incomplete Service Impact Uptime

The Uptime that falls within complete. This Up time is carried forward till the pattern is completed.

Incomplete Service Impact Downtime

The Downtime that falls within complete. This down time is carried forward till the pattern is completed.

MTBSI Incidents

The number of Service Impacts a service incident is incomplete at the boundary of one hourly interval.

MTBSI Interval Value

Ratio of Hourly SI Uptime & Downtime to Hourly incidents

Ever Failed

Displays whether the component has ever failed.

Rolling Completed Service Impact Uptime

The rolling uptime that falls complete. This up time is carried forward till the pattern is completed.

Rolling Completed Service Impact Downtime

The rolling Downtime that falls within a SI pattern, for which the pattern isnt complete. This downtime is carried forward till the pattern is completed.

Rolling Incidents

The rolling number of Service impacts within the interval under consideration. If a service incident is incomplete at the boundary of one hourly interval, it is processed in the interval where it completes the pattern.

MTBSI Rolling Value

Ratio of Rolling SI Uptime & Downtime to Rolling incidents

MTBSI Last Significant State

Displays the last significant state of the component.

Pattern In Service

Displays the pattern in service for the component.

MTBSI Incident Downtime (minutes)

Displays MTBSI Downtime in minutes.

MTBSI Incident Uptime (minutes)

Displays MTBSI Uptime in Minutes.

Rolling MTBSI (minutes)

Displays Rolling MTBSI in minutes.

MTBSI

Displays Mean Time Between Service Impacts in minutes.

MTBSI Service Incidents

Displays Hourly Incidents.

Enter MTBSI Period and Interval

Condition to prompt user for MTBSI Interval Size

Enter MTBSI Period

Condition to prompt user for start date and end date to compare with MTBSI Interval Date

Causal Component Change Number

Change number when status changes

Causal Component Id

Unique ID for Causal Component

Causal Status

Status of Causal Component

Causal Status Component Guid

Unique system ID

Causal Status Component Id

Unique ID for Causal Component

Causal Component Status Type

Status Type of Causal Component

Causal Component Status

Status of Causal Component

Causal Status Change Number

Change number when status changes

Schedule

Schedule of Causal component when status type

Manual User

User who manually modifies the causal component

Manual Comment

Manual comments of user who manually modifies the causal component

Causal Status Component Cost

The down time/cost of the causal component

Causal Status Incident Date

Displays the Causal component status Interval Date

Causal Status Insert Date -Time

Displays Causal Status Insert Date -Time

Causal Event Guid

Unique system ID

Causal Events

Unique ID for Causal Component

Component ID Active

Unique ID of Component which are not deleted

Component Class-Component Name Active

Selection of non-deleted component for selected component class

Component Class-Component Name

Selection of component on selected component class

Component Class-Slot Name

Selection of component slot name for selected component class

Component Class-Slot Name-Slot Value

Selection of component slot name and value for selected component class

Component Slot Name-Slot Value

Selection of component slot value for selected component slot name

Component Name Active

Name of Component Name which are not deleted

Bppm Server Name

Displays BPPM Server name

BPPM Server Id

Unique ID of a BPPM Server name

Ext Rep Attribute Set Name

Displays External report attribute set name

Patrol Agent Name

Displays name of patrol agent

Patrol Agent Port

Displays port of patrol agent

Ext Rep Attribute Deleted Time

Displays external report attribute set deleted time

Instance Deleted Time

Displays monitor instance deleted time

TimeStamp

Displays timestamp date for objects selected.

Hour

Displays hourly date for objects selected.

Daily

Displays daily date for objects selected.

Weekly

Displays weekly date for objects selected.

Monthly

Displays monthly date for objects selected.

Quarterly

Displays quarterly date for objects selected.

Yearly

Displays yearly date for objects selected.

Enter/Select Stats Date Range

Condition to prompt date range from STATS_DATA table

Enter/Select Hourly Date Range

Condition to prompt date range from HOURLY_DATA table

Enter/Select Daily Date Range

Condition to prompt date range from DAILY_DATA table

Enter/Select Weekly Date Range

Condition to prompt date range from WEEKLYSUMMARYDATA table

Enter/Select Monthly Date Range

Condition to prompt date range from MONTHLYSUMMARYDATA table

Enter/Select Quarterly Date Range

Condition to prompt date range from QUATERLYSUMMARYDATA table

Enter/Select yearly Date Range

Condition to prompt date range from YEARLYSUMMARYDATA table

Average Value

Displays average data value for selected interval.

Count Value

Displays count of data values for selected interval.

Minimum Value

Displays minimum data value for selected interval.

Maximum Value

Displays maximum data value for selected interval.

Sum Value

Displays sum of data value for selected interval.

Value

Displays data value for selected interval.

Group Level1

Displays configured value of level1 group.

Group Level2

Displays configured value of level2 group.

Group Level3

Displays configured value of level3 group.

Group Level4

Displays configured value of level4 group.

Group LeafID

Unique ID

Group Level1 - Device

Displays device name of a first level Group.

Group Level2 - Device

Displays device name of a second level Group.

Group Level3 - Device

Displays device name of a third level Group.

Group Level4 - Device

Displays device name of a fourth level Group.

Group Name

Displays name of the group.

Group Description

Displays description about the group.

Parent Group Name

Displays name of the parent group.

Group Status

Flag field which displays status of the group, indicates whether the group is Active or Deleted.

Group Deleted Time

Displays the time when the group was deleted

Severity

Severity of the event created  (Abnormality thresholds). Filtered Normal severity to make consistent with BPPM Server Thresholds UI.

Threshold

The range of values for which events are triggered. This range does not include the threshold. For example: Above checked - An event is generated if data is continually greater than the threshold for the
 specified duration. Below checked - An event is generated if data is continually lesser than the threshold for the specified duration.

Comparison

This is a reference point for comparison of the actual measurements with the defined threshold values. The supported operators for comparison are >, <, ==, >= or <=. This is available only for the Absolute Global and Instance Thresholds. For example, if you select the >= operator for an attribute and set the threshold value to 90%, events are generated when the threshold value is greater than or equal to 90%.

Duration minutes

The duration (in minutes) of delay from when the threshold is violated to when an event is generated. The same duration is required to close an event, starting with the first data point where threshold is no longer violated.

Outside Baseline

The baseline to associate with the threshold. This helps to reduce false events associated with latest trends. For example, response time may be higher during peak time. In this case, associating
 the response time with appropriate baseline covers any false event. If you select Auto baseline an event is generated accordingly. Other options are Hourly, Daily, Weekly, Hourly and Daily and All
 Baselines.

Auto Close

Indicates whether the triggered event has been closed automatically, when it returns to normal state.

Predict

Boolean value which indicates whether predictive events have been generated or not

Stats Attribute Id

Unique identifier of attribute corresponding to threshold data

Severity

Severity of the event created  (Abnormality thresholds). Filtered Normal severity to make consistent with BPPM Server Thresholds UI

Threshold

The range of values for which events are triggered. This range does not include the threshold. For example: Above checked - An event is generated if data is continually greater than the threshold for the
specified duration. Below checked - An event is generated if data is continually lesser than the threshold for the specified duration.

Comparison

This is a reference point for comparison of the actual measurements with the defined threshold values. The supported operators for comparison are >, <, ==, >= or <=. This is available only for the Absolute Global and Instance Thresholds. For example, if you select the >= operator for an attribute and set the threshold value to 90%, events are generated when the threshold value is greater than or equal to 90%.

Duration minutes

The duration (in minutes) of delay from when the threshold is violated to when an event is generated. The same duration is required to close an event, starting with the first data point where threshold is no longer violated.

Outside Baseline

The baseline to associate with the threshold. This helps to reduce false events associated with latest trends. For example, response time may be higher during peak time. In this case, associating
 the response time with appropriate baseline covers any false event. If you select Auto baseline an event is generated accordingly. Other options are Hourly, Daily, Weekly, Hourly and Daily and All
 Baselines.

Auto Close

Indicates whether the triggered event has been closed automatically, when it returns to normal state.

Predict

Boolean value which indicates whether predictive events have been generated or not

Schedule ID

Unique ID for schedule

SLA ID

Unique ID for SLA

Threshold Monitor Type Id

Unique identifier of monitor type corresponding to threshold data

Stats Attribute Id

Unique identifier of attribute corresponding to threshold data

Threshold Instance Id

Unique identifier of threshold instance id

Severity

Severity of the event created  (Abnormality thresholds). Filtered Normal severity to make consistent with BPPM Server Thresholds UI.

Threshold

The range of values for which events are triggered. This range does not include the threshold. For example: Above checked - An event is generated if data is continually greater than the threshold for the
 specified duration. Below checked - An event is generated if data is continually lesser than the threshold for the specified duration.

Above or Below

Reference point for the following parameters, Above High - Above the High baseline, Below Low - Below the Low baseline, Auto-baseline - an event is generated accordingly. Other options are Hourly, Daily, Weekly, Hourly and Daily and All Baselines.

Duration minutes

The duration (in minutes) of delay from when the threshold is violated to when an event is generated. The same duration is required to close an event, starting with the first data point where threshold is no longer violated.

Outside Baseline

The baseline to associate with the threshold. This helps to reduce false events associated with latest trends. For example, response time may be higher during peak time. In this case, associating
 the response time with appropriate baseline covers any false event. If you select Auto baseline an event is generated accordingly. Other options are Hourly, Daily, Weekly, Hourly and Daily and All
 Baselines.

Absolute Deviation

Deviation is a way of introducing tolerance into the baseline values. If there is a small change in baseline that is not significant for reporting purposes, deviation can be set to ignore this small change. For example, if baseline low value is 40, baseline high value is 100, and deviation is set to 2, then a signature event is generated when the average of all data values inside the threshold duration goes above 102 or below 38. The deviation value is additive (not multiplicative) and is given in the same units being measured by the particular monitor attribute (that is #,%, bytes, milliseconds, and so on). The default value for Absolute deviation is 5 units.

Percentage Deviation

Percent Deviation has the same meaning as the existing deviation field, except that the actual value of the deviation is expressed in terms of a percent of the baseline value (rather than an absolute value).The default value for percentage deviation is 5%.

Minimum Sampling Window

Define minimum window of time to keep raw data points that are considered for intelligent threshold computation. Data points outside this range are usually discarded.

Stats Attribute Id

Unique identifier of attribute corresponding to threshold data

Severity

Severity of the event created  (Abnormality thresholds). Filtered Normal severity to make consistent with BPPM Server Thresholds UI

Threshold

The range of values for which events are triggered. This range does not include the threshold. For example: Above checked - An event is generated if data is continually greater than the threshold for the specified duration. Below checked - An event is generated if data is continually lesser than the threshold for the specified duration.

Above or Below

Reference point for the following parameters, Above High - Above the High baseline, Below Low - Below the Low baseline, Auto-baseline - an event is generated accordingly. Other options are Hourly, Daily, Weekly, Hourly and Daily and All Baselines.

Duration minutes

The duration (in minutes) of delay from when the threshold is violated to when an event is generated. The same duration is required to close an event, starting with the first data point where threshold is no longer violated.

Outside Baseline

The baseline to associate with the threshold. This helps to reduce false events associated with latest trends. For example, response time may be higher during peak time. In this case, associating the response time with appropriate baseline covers any false event. If you select Auto baseline an event is generated accordingly. Other options are Hourly, Daily, Weekly, Hourly and Daily and All Baselines.

Absolute Deviation

Deviation is a way of introducing tolerance into the baseline values. If there is a small change in baseline that is not significant for reporting purposes, deviation can be set to
 ignore this small change. For example, if baseline low value is 40, baseline high value is 100, and deviation is set to 2, then a signature event is generated when the average of all data values inside the threshold duration goes above 102 or below 38. The deviation value is additive (not multiplicative) and is given in the same units being measured by the particular monitor attribute (that is #,%, bytes, milliseconds, and so on). The default value for Absolute deviation is 5 units.

Percentage Deviation

Percent Deviation has the same meaning as the existing deviation field, except that the actual value of the deviation is expressed in terms of a percent of the baseline value (rather than an absolute value).The default value for percentage deviation is 5%.

Minimum Sampling Window

Define minimum window of time to keep raw data points that are considered for intelligent threshold computation. Data points outside this range are usually discarded.

Threshold Monitor Type id

Unique identifier of monitor type corresponding to threshold data

Stats Attribute Id

Unique identifier of attribute corresponding to threshold data

Threshold Instance Id

Unique identifier of threshold instance id

FromTime

Displays hourly start date corresponding to rate data.

ToTime

Displays hourly end date corresponding to rate data.

Avg Value

Displays average value corresponding to rate data.

Min Value

Displays minimum value corresponding to rate data.

Max Value

Displays maximum value corresponding to rate data.

Enter/Select Rate Data Date Range

Condition to prompt date range from RATE_DATA table

Aggregate Value

This gives user a prompt to select the aggregation function (Avg, Min, Max, Sum, Count) at runtime.

Performance Interval Size

This gives user a prompt to select the date interval size at runtime.

Aggregate Function

This gives user a prompt to select the aggregation function (Avg, Min, Max, Sum, Count) at runtime.

Device - Monitor - Instance

Selection of instance on basis of selected device and monitor

Device - Monitor

Selection of monitor on basis of selected device

Monitor - Attribute

Selection of attribute on basis of selected monitor

BPPM Server - Devices

Selection of device on basis of selected BPPM server name

Monitor - Attribute - Device

Selection of device on basis of selected monitor and attribute

Device - Monitor - Attribute

Selection of attribute on basis of selected device and monitor

Device - Instance

Selection of Instance on basis of selected device

Location - Device

Selection of device on basis of selected location

Owner - Device

Selection of device on basis of selected owner

Building - Device

Selection of device on basis of selected building

Department - Device

Selection of device on basis of selected department

Enter/Select Device - Monitor - Instance

Prompt to select instance on basis of selected devices and monitors

Response Time

Displays the Response Time of an event

Reporting Timezone

Displays timezone region code

Reporting Interval Size

Prompt for Interval

Reporting Begin Date

This gives user a prompt for Start Date

Reporting End Date

This gives user a prompt for End Date

Reporting Start Date - Cross Domain

Start Date Prompt for Cross Domain Reports

Reporting End Date - Cross Domain

End Date Prompt for Cross Domain Reports

Today - Date Time

Current time with the time component

Last 24 hours_timestamp

Reports on the previous 24 hours

Last 24 hours

Reports on the previous 24 hours

Last 48 hours

Reports on the previous 48 hours

Last 7 days from now

Reports on the previous 7 days

Last 15 days from now

Reports on the previous 15 days

Last 30 days from now

Reports on the previous 30 days

Last 60 days from now

Reports on the previous 60 days

Last 90 days from now

Reports on the previous 90 days

Isolation Level

Displays transaction isolation level (To be used only with SQL Server database)

Tomorrow - Date Time

Displays tomorrows date time

Reporting Start Month

Prompt to enter Reporting Start Month

Reporting End Month

Prompt to enter Reporting End Month

Reporting Start Year

Prompt to enter Reporting Start Year

Reporting End Year

Prompt to enter Reporting End Year

Previous Month

Displays previous Month

Current Month

Displays current Month

Next Month

Displays next Month

Previous Year

Displays previous Year

Current Year

Displays current Year

Next Year

Displays next Year

Today - Date (No time component)

Current date without the time component

Start Date of Previous Year¹

Displays start date of previous year

End Date of Previous Year¹

Displays end date of previous year

Start Date of Previous Month¹

Displays the start date of previous month

End Date of Previous Month¹

Displays the end date of previous month

Start Date of Previous Week¹

Displays the start date of previous week

End Date of Previous Week¹

Displays the end date of previous week

Report URL

Report URL for running reports; need to change definition according to Java or .NET infoview

Event Report Folder

Name of Event Report Folder

Event Summary Folder

Name of Event Summary Folder

Event Detail Folder

Name of Event Detail Folder

Event Response Folder

Name of Event Response Folder

Top N Folder

Name of Top N Folder

Impact Report Folder

Name of Impact Report Folder

Impact Metrics Folder

Name of Impact Metrics Folder

Impact Status Folder

Name of Impact Status Folder

Begin Date Text

Begin Date Text

End Date Text

End Date Text

Reporting Date Format

Reporting Date Format

Reporting Null Value Constant

Null Value Constant, can be used for objects displaying no value

Performance Reporting Folder

Name of Performance Reporting Folder