Configuring the OSD Manager


When configuring the OSD Manager, two or three different parts must be configured, depending on its assigned roles:

  • The specific OSD Manager parameters
  • The parameters for the image repository role
  • If it is also assigned the network boot agent role, the parameters for the network boot agent
  1. Go to the OS Deployment > Your OSD Manager > Configuration node in the left window pane.
  2. Click Properties properties.png.
     The Properties window appears.
  3. Define the following parameters for the OSD Manager role:

    Parameter

    Description

    Windows ADK Path

    Enter into this text box the path to the Windows ADK. If you do not enter any value, the default installation path is used. To directly select the path click Select next to the text box. A pop-up menu appears with the directory structure of the device where you can directly select the installation directory. Click OK to confirm and close the window.

    Windows ADK Status

    To test if the Windows ADK (WADK) is correctly installed, click Test next to the box. The agent verifies the WADK installation and updates the displayed status accordingly.

    TFTP Local Path

    Enter into this text box the local path to the shared TFTP server directory. To directly select the path click Select next to the text box. A pop-up menu appears with the directory structure of the device where you can directly select the path. Click OK to confirm and close the window.

    Driver Root Folder

    This text box contains the complete path to the directory where the drivers are copied to for later use. The default directory for this is<InstallDir>/Master/data/OSDeployment/drivers/. Do not modify this value, if you are following a standard deployment. To directly select the path click Select next to the text box. A pop-up menu appears with the directory structure of the device where you can directly select a different directory. Click OK to confirm and close the window.

    Status

    This field displays the overall progress of the WinPE initialization process which generates files based on the images of the WIM Windows ADK. These files are then used as the base for any OSD project in the BMC Client Management - Software Distribution. Here you can see the advancement of the initialization in percent values and any error messages should errors occur. Be aware, that this process might take several minutes to complete. During this process, which is required only once when defining the OSD Manager for the first time, the console can be used for any type of viewing but no writing operations. To start the process click Check Environment.

    The definition of the OSD Manager cannot be completed until the environment check completes without errors and the Status shows OK - Initialization Complete .

  4. To verify click Check Environment to the right of the Status box.
     CM now verifies all entries of this page, that is, the directories and the access rights to them and the DHCP server address, if it is installed on another device. If all values are correct, the Status OK is returned, otherwise an error message displays in the Status box indicating where the parameter value is not correct.
  5. Click the double arrow in the Image Repository line.

For the image repository you need to define the following parameter:

Parameter

Description

Storage Path

Enter into this text box the relative path for the storage location for all necessary OSD data. The path is relative to the agent installation directory. Click Browse to select the path in the storage path selection window. Click OK to confirm and close the window. If this field is left empty, the default path (../data/OsDeployment/streams) is used.

  1. If the OSD Manager is also a network boot listener, click the double arrow in the Network Boot Listener line to define the parameters of this role as well:

    Parameter

    Description

    Internal DHCP

    Check this box if you want to use the DHCP gateway of the OSD module instead of specifically configuring your own DHCP server. In this case a DHCP gateway is installed that is redirecting the computers to the OSD manager and get installed, instead of adding the necessary options to your existing DHCP server.If you do not use this option make sure you have a DHCP server on a different machine that is configured as explained in the configuration options of the Prerequisites topic, preferably with the 066/067 options. If you clear this box, the following two boxes become available.

    DHCP Server Address

    Enter the IP address or DNS name of the DHCP server which redirects the PXE requests to the local TFTP server. The DHCP server must have the protocol BOOTP activated.This option is only available, if the internal DHCP gateway is not used.

    Skip DHCP Check

    If the DHCP server is installed on the same device as the OSD Manager device, you must check this text box, because the DHCP server cannot be verified in this case. This test verifies, if the BOOTP protocol is activated on the DHCP server.This option is only available, if the internal DHCP gateway is not used.

    Unicast Server Port (TCP)

    This parameter determines on which port the unicast server should listen and to which port the clients should send their requests and acknowledgements. It is only available in the general configuration, not on project level. Modifying this parameters requires restarting the unicast server and, to be correctly applied, restarting all related OSD agents as well. In addition all projects need to be rebuilt if this parameter is modified as it is embedded during the WinPE ISO image build. The default would be the agent port in TCP, typically 1613. Only modify this default value, if absolutely necessary.

    Multicast Server Port (UDP)

    This parameter determines on which port the multicast server should listen and to which port the clients should send their requests and acknowledgements. It is only available in the general configuration, not on project level. Modifying this parameters requires restarting the multicast server and, to be correctly applied, restarting all related OSD agents as well. In addition all projects need to be rebuilt if this parameter is modified as it is embedded during the WinPE ISO image build. The default would be the agent port in UDP, typically 1610. Only modify this default value, if absolutely necessary.

    Interfaces

    For the Interfaces you need to define on which local interfaces the agent is to listen. You have the following options: All Interfaces: Check this radio button, to listen on all local network interfaces. Custom Interfaces: Check this radio button, to only listen on some local network interfaces. The box below displays the list of available interfaces. Check the boxes of all interfaces to listen to.

  2. Click OK to finalize the OSD Manager definition. 

    Note:

    Be aware that the first initialization might take several minutes.

 

Tip: For faster searching, add an asterisk to the end of your partial query. Example: cert*