The project's dashboard
The values in the upper part of the view display the main parameters and their values of this project.
Parameter | Description |
|---|---|
Name | This field shows the name of the selected project. |
Build Status | This field displays the current status of the build. If any other status than OK appears in this field, the current project can not be deployed to the targets for installation. |
Re-build required | This field displays if a full or partial re-build of the project is required before it can go online. This might be the case after modifications such as the addition of drivers to the project have occurred. |
Last Build Date | This field displays the date and time at which the last build of the currently selected project finished. |
Scheduled Date | This field displays the date and time that defines when the project build operation is to be launched. |
Description | A summarized description of the functionality of the service, such as Provides software installation services such as Assign, Publish, and Remove. |
Architecture | This field indicates the type of architecture for the OS deployment, that is, the architecture of the WinPE image launching the setup program. The possible options are 32-bit for x86 and 64-bit for amd64 Windows installations. |
Capture or Deployment Disk | This field displays the drive letter on which the new operating system is installed on the target devices or on which it is installed if a capture of an existing system is to be done by the selected project. |
Online | This value indicates if the project was a build and the files required to install and reboot the device are available, that is, the image files, the boot file, the PXE files, the unattended files, and so on. Possible values are Yes , the build process finished successfully and the necessary files were published, and No , the necessary files are not yet published and available. Only one project can be online at a time. |
Operation after Installation | This field provides the list of possible actions which can be executed after the installation of the operating system has finished on the target. The possible values are Reboot, Shutdown and None . This option is not applicable to the Setup mode. |
The lower part of the view provides the table for all devices that are included in the project and general information about the advancement of the deployment.
Parameter | Description |
|---|---|
Name | The name of the device as it is known in the network. |
MAC Address | The physical address of the device. |
Type | Indicates the way the target was added to the project, that is, if it was added directly as a Target or via a PXE Subnet Mask or a PXE Menu . |
Status | This field displays the current status of the listed device with regards to the operating system deployment. |
Activation Status | This field displays the status of the listed target device with regards to their OS installation. The possible values are Inactive Target illustrated also with a blue flag |
DHCP Activated | Indicates if the internal DHCP server is enabled. |
Static IP Address | The IP address which is to be attributed to the target device. |
, if the installation process was launched with success and Active Target illustrated also with a green flag 
, if the device is still waiting to launch its OS installation or an error occurred.