Adding targets via an address range

You can also add one or more devices by typing their name or address.

Related topics

Configuring-target-lists

Adding-targets-from-lists

Adding-existing-device-groups-as-targets

Defining-the-Target-List

Configuring-a-new-target-list

Note

When you specify an address range with IPv6 addresses be careful to not add complete subnets, as these are very large and take very long to complete.

  1. Click Add Existing Device client_plus.png .
    The Add a Device dialog box appears on the screen.
  2. Enter the name of the device to be added to the list into the respective field. The name can be entered
    • Either as its short or long network name, for example, scotty or scotty.enterprise.com or as its IP address, IPv4 or IPv6, for example, 159.124.5.10 or 2001:0db8:85a3:0000:0000:8a2e:0370:7334 ,
    • Or as a comma separated list of names or ranges, for example, scotty; 192.168.4.45-192.168.4.47; 2001:0db8:85a3:0000:0000:8a2e:0370:7334 which includes computers scotty.enterprise.com , 192.168.4.45, 192.168.4.46 , 192.168.4.47 and 2001:0db8:85a3:0000:0000:8a2e:0370:7334 .
    • A range can also be entered as CIDR notation in the form of 192.9.205.22/18 or 2001:0db8:85a3:0000:0000:8a2e:0370:218/733 .
  3. Click OK to add the device and close the window.

 

Tip: For faster searching, add an asterisk to the end of your partial query. Example: cert*