Skip to Content
Information
Space banner This version of the product is in limited support. However, the documentation is available for your convenience. You will not be able to leave comments.

Defining transfer window time-slots

To define or modify the network load in the table for the different time-slots proceed as follows. If the transfer window is to be used for multicast delivery, at least one slot must be filled in, otherwise the file transfer will be executed via unicast.

  1. Select the Unit and the Channel above the table.

  2. Click the slot which is to be edited.

    Information

    You can also select a range of slots by dragging your mouse button over the desired range.

  3. Click Edit > Define Time-slot timeslot.png.
     The Define Transfer Window Time-Slots window appears.

  4. Edit the value into the text box for the selected time-slot.

    Information

    Make sure to use a value in accordance with the Unit you have previously chosen.

  5. Click OK to confirm the value and close the window.
     The value you entered was defined for either the one box or for the whole range of boxes you selected.
  6. Repeat these steps for all other slots or ranges to be defined or modified.

 

Tip: For faster searching, add an asterisk to the end of your partial query. Example: cert*

BMC Client Management 12.9