Skip to Content

Default language.

Information
Unsupported content This version of the product has reached end of support. The documentation is available for your convenience. However, you must be logged in to access it. You will not be able to leave comments.

Editing the multicast options

The deployment of a new operating system to the targets can be executed via multicast. This view provides the multicast parameter default values, which can be modified if required for this specific deployment.

If you are modifying an existing project via this window be aware, that a complete rebuild of the project is required if the parameters marked with an asterisks (*) are modified.

  1. If required you can change the multicast mode to broadcast in the Mode field.

    Information

    Be aware, that this option might slow down the network if it is used in a production environment instead of a dedicated subnet.

  2. Make modifications to the speed, count timeout, size and packages values if required.
  3. By default both Automatic Start Conditions are activated. Deselect the undesired option if only one is required and modify the number value according to your requirements or uncheck both if you want to manually start the multicast sessions.

  4. Check the Use Tunnel option if you want to use an internal tunnel for the multicast transfer.

    Information

    The Use Tunnel option is only applicable if you are using an OSD Proxy.

  5. Check the Disable Automated Driver Detection box if you want to manually add the required drivers.
  6. Modify the cache parameters if necessary.
  7. Click Next to go to the following wizard page.

 

Tip: For faster searching, add an asterisk to the end of your partial query. Example: cert*

Home