Skip to Content

Default language.

Information
Unsupported content This version of the product has reached end of support. The documentation is available for your convenience. However, you must be logged in to access it. You will not be able to leave comments.

Defining the image parameters

In this next window, the parameters for the image must be defined. It will only be displayed for a new image.

  1. Enter the name of the new image into the Name box.
  2. Select the architecture type the project is to apply to from the Architecture list.
  3. Select the type of BIOS mode supported by the project, that is, if it is to support UEFI or legacy deployments or both.
  4. Select the type of image to create from the Type drop-down list.
  5. Enter the network path to the image or setup folder, where you copied the image files required for the installation, for example, \\192.168.196.13\Vista32 into the Location box.
  6. Enter the login and password to be used by the deploying device to access the network location in read and write mode into the Connection Parameters boxes.
  7. After all parameters are defined they must be checked that they are correct. Until the verification is executed and returns the Status OK , the wizard cannot continue.
  8. To verify click Check Image to the right of the Status box.
     BMC Client Management - Software Distribution will now verify all entries of this page, that is, the directory and the access rights to it.
  9. If all values are correct the Status OK is returned, otherwise an error message displays in the Status box indicating where the parameter value is not correct.
  10. After the Status OK is returned click Next to go to the following wizard page.

 

Tip: For faster searching, add an asterisk to the end of your partial query. Example: cert*

Home