Super Master installation

If you are installing a super master architecture, you must execute the installation procedure described in section Installing on site at least twice: once for the super master on its device and once for each regular (nonsuper) master server that is installed on your different locations. When all masters including the super master are installed, you need to make the following modifications on the regular masters:

Configuring the Vision64Database.ini file

In the Vision64Database.ini configuration file (the Client Management - database configuration file) you define the parameters on which data is uploaded to the super master and its database. To do so, proceed as follows:

1. Go to the [InstallDir]/master/config directory and open the file Vision64Database.ini in a text editor.

2. Find the section [AdministeredRelayUpload] in the file.

   This section defines all parameters dealing with the relationship between regular master and super master. It provides the following parameters which by default are all set to true, that is, all different types of inventory upload options are activated.

3. If one or the other type of inventory does not need to be uploaded, for example, because you have not acquired the respective license, such as for patch management, modify the true value to false .
4. Save the modifications and close the file.

After you have made all these modifications, you can launch the Client Management - agent for all different master servers, starting with the super master, and you can continue with the regular installation procedure of the Client Management - agent for all other devices in your network.

Configuring the relay.ini file

In the relay.ini configuration file for each regular master ( not the super master) you must indicate that even though the device is of type master server it still has a parent, the super master. Therefore make the following modifications:

1. Go to the [InstallDir]/master/config directory and open the file relay.ini in a text editor.
2. Go to ParentName and enter the name or IP address of the super master device.
3. (Optional) If you did not use the standard installation parameters and assigned a different port to the super master, modify the entry ParentPort .
4. Save the modifications and close the file.