Upgrading on Linux using the unified product installer
This topic describes how to use the unified product installer to interactively upgrade TrueSight Server Automation on 64-bit Linux platforms. It includes the following sections:
You can alternatively use the unified product installer to upgrade in an unattended (silent) mode. For more information, see Upgrading silently using the unified product installer.
List of components that are upgraded by the unified product installer
The unified product installer upgrades the TrueSight Server Automation schema (not the database software) on the following supported platforms for Linux:
If you are running a "mixed" environment (for example, you installed Linux Application Server + Microsoft SQL Server database via their individual components), you can use the unified product installer to upgrade the environment. The UPI is agnostic about the database during the upgrade.
|File server||If the file server is separate from the Application Server, then it is upgraded only if it resides on a 64-bit platform.|
|Components on the computer that hosts the Application Server:|
Application Server (including its profiles — such as configuration server, job server, or NSH proxy server)
Do not shut down Application Servers when upgrading using the unified product installer. Shutting down the Application Servers during the upgrade can cause the upgrade to fail. Configuration changes will not be applied on Application Server machines that are down during the upgrade.
Network Shell (NSH)
Based on whether the host computer on which you are installing Network Shell has a supported version of Perl installed, either of the following is performed:
|TrueSight Server Automation requires an RSCD Agent installed on each Application Server. Therefore, during the upgrade, the unified product installer automatically installs RSCD Agents on the Application Servers, if they are not already present on them. The unified product installer installs the RSCD Agent at the following location on the Application Server:|
Note that if an RSCD agent is already present on the Application Server, the unified product installer upgrades the RSCD agent automatically.
|PXE server and TFTP server||Only those PXE Servers that have a status of up and running in the Infrastructure Management Window are upgraded. You need to upgrade the remaining servers manually (as described in Upgrading a PXE server on Linux or UNIX).|
List of components that are not upgraded by the unified product installer
|Component NOT upgraded||Notes|
|TrueSight Server Automation Console|
After completing the upgrade using the unified product installer, you can attend to the upgrade of the console. Manually upgrade the Console by running its individual component installer, see Upgrading the TrueSight Server Automation Console.
You can choose not to upgrade certain consoles. Specifically, version 8.9 of the TrueSight Server Automation Application Server supports communication with TrueSight Server Automation Consoles of version 8.8. To enable this backward support for any specific Application Server, you must use the blasadmin command To enable communication with clients of an earlier version of TrueSight Server Automation.to turn off the version compatibility check that occurs whenever you access a Console. For more information, see
RSCD Agents in certain scenarios
RSCD Agents in the following scenarios are not upgraded:
|Multiple RSCD agents running on a single host computer|
Depending on which version of TrueSight Server Automation you are on, the unified product installer may or may not upgrade multiple RSCD agents that are installed on single machine.In TrueSight Server Automation 8.6 SP1 and later versions. The local RSCD agents (installed using the
|NSH clients on non-Application Server host computers||Use the instructions in Upgrading the Network Shell on Linux and UNIX.|
|Custom configuration objects|
Upgrade any custom configuration objects that you have created and distributed, as described in Upgrading custom configuration objects.
|Compliance Content||Perform an over-the-top installation of the new Compliance Content add-ons, as described in Installing and configuring Compliance Content add-ons.|
A dual database used for provisioning
|PXE and TFTP servers that reside on separate host computers||When you upgrade a PXE server on a different subnet than the target server, you need to copy the installation files to the remote machine and upgrade the remaining servers manually, as described in Upgrading a PXE server on Linux or UNIX.|
BMC Decision Support for Server Automation or TrueSight Smart Reporting for Server Automation
For upgrade instructions, see the BMC Decision Support for Server Automation or TrueSight Smart Reporting for Server Automation online documentation.
|BladeLogic Portal||For BladeLogic Portal upgrade instructions, see Upgrading in the BladeLogic Portal online documentation.|
Before you begin
Ensure that your environment meets the requirements discussed in Preparing for a Linux or UNIX upgrade using the unified product installer.
The task of running SQL Update scripts, which was necessary in the past for any upgrade to a TrueSight Server Automation patch or service pack, is no longer required during an upgrade. The database upgrade is now handled internally by the unified product installer, which was introduced in version 8.6.
To upgrade TrueSight Server Automation using the unified product installer
Prior to upgrading your production environment, it is best practice to test the upgrade in a duplicated environment.
Ensure that you use a fresh copy of the installation folder (and its contents), for each environment that the unified product installer is run in. The unified product installer saves environment-related information in the installation folder (Disk1), which will cause errors if the same copy is used for upgrading different environments.
Download and extract the installation package appropriate for the operating system level and hardware platform in a
<temporary location>. The package follows the naming convention BSA<version>-<platform>.zip, and contains the unified product installation program files.
Download this package to the host computer of the Application Server that was set up as a configuration server (for more about this type of Application Server setup, see If this is a Linux computer, ensure that it has an RSCD agent installed and running.
Ensure that the temporary location where you extract the installation package does not contain the string nsh in its path.
Extract the BSA<version>RSCDAgents.zip file and copy the rscd folder to the following location before running the unified product installer (The unified product installer uses the RSCD installers while installing or upgrading TrueSight Server Automation in your environment):
If you are on a Linux machine, assign executable permission to the temporary directory by entering the following command:
chmod +x -R <temporary directory>
In addition, if the temporary directory is at the end of a path (that is, has at least one parent directory), assign read permission to the others class (which includes the bladmin system user) for all directories in the path. To do this, execute the following command on the top-level directory in the path:
chmod o+r -R <top-level directory>
Run the installation file for TrueSight Server Automation (setup.bin).
For Linux, BMC recommends that you execute the installation from a root shell. Do not execute the installation file from a non-root account.
Follow the instructions in the installation wizard and click Next. Enter your Authentication profile credentials to proceed with the upgrade procedure. The profile that you specify must be associated with the same Application Server where you are performing the upgrade. Note that only secure remote password (SRP), LDAP, or Domain Authentication type profiles can be used with the unified product installer. For more information, on Authentication profile credentials, see Setting up an authentication profile and Implementing authentication.
- The unified product installer program displays the different types of servers that are present in the TrueSight Server Automation environment and their count.
If the unified product installer was successful in connecting with all servers, you can proceed with the installation. Skip to step 8.
Otherwise, click Next to continue to step 7.
If any of the remote servers do not have an RSCD Agent installed, the wizard displays a list of those servers. You can choose from the following options:
- Manually install an RSCD Agent on each of the listed remote servers, and then resume the installation through the unified product installer.
- Authorize the unified product installer to install an RSCD Agent on each of the listed remote servers by providing the following information:
The name of a local super user (root or root-equivalent user on Linux) to which the RSCD Agent should map incoming connections during the installation.
The default is root.
Note: The installer does not validate the specified user to ensure that it is present and has administrator privileges on each of the target machines.
- Host name or IP address of the PSExec host computer.
- User credentials (user name and password) for establishing an SSH connection to the remote hosts.
If user credentials are the same on all remote servers, select the Use Common Credentials check box, and enter credentials in the fields below the check box. Otherwise, clear the check box and enter credentials for each of the servers directly into the table that lists the servers.
Click Install to proceed with the upgrade of all TrueSight Server Automation components that are present in your environment.
If product components are detected during the upgrade on remote Windows machines in the TrueSight Server Automation environment, installers are automatically copied to the C:\BSAInstallerDumpDir directory on the remote machines. These installers are used to automatically upgrade product components on those machines.
If problems arise during the upgrade, the on-screen error messages contain instructions and guidance to help you troubleshoot the problems, and further information is available in the log files. For a list of log files written during the upgrade process, see the Troubleshooting section.
After performing the recommended troubleshooting steps, you can return to the installer and safely resume the upgrade from the point where you left off. You might do this in one of the following ways:
- If the installation wizard is still open, click the Previous button. This takes you to a new Summary window, which now lists only those components and servers that have not yet been successfully upgraded. Click Accept to re-attempt the upgrade of those components.
- If you were forced to close the installation wizard (typically the case for longer troubleshooting procedures), you can re-launch the installer. After several initial windows, an updated Summary window lists only those components and servers that have not yet been successfully upgraded. Click Accept to re-attempt the upgrade of those components.
During the upgrade, the original Application Server deployments are backed up. The backup files are stored in <installation directory>/br.
Where to go from here
The unified product installer automatically installs agent installer jobs and depot objects such as agent installers and agent bundles that can be used for installing or upgrading agents on servers in the environment. The agent installers, agent bundles, and agent installer jobs are present in the following locations:
Object Depot Path Can be used for Installers /Depot/BMC Maintenance/Agent Installers/ Agent install and upgrade Bundles /Depot/BMC Maintenance/Agent Bundles/ Agent upgrade Jobs /BMC Maintenance/Agent Installer Jobs/ Agent upgrade
The agent installer for the Solaris platform requires additional configuration before first use. See Additional information for Solaris installation packages.
For more information about using these objects, see Installing one or more agents using the TrueSight Server Automation Console and Upgrading the RSCD Agent using an Agent Installer Job.
Modifying the name or path of these depot objects may cause errors in the agent installation process.
- Upgrade any remaining product components that were not upgraded by the unified product installer.
- If you adjusted security settings before the upgrade (as described in the troubleshooting instructions for security settings), remember to re-adjust your security settings, based on your unique needs and the IT security policies at your organization.
- For Windows patching, you may still be using the PD5.cab, or HF7b.cab ( PD5.xml, or HF7b.xml) configuration files for Windows patching. However, TrueSight Server Automation 8.9.03 and later versions do not support the PD5, or HF7b configuration files, and you must use the WindowsPatchData.zip file instead. The Windows catalog update job fails if you use the .cab or .xml configuration files. To update the configuration files used for Windows patching see, Global configuration parameters.
On SuSE 11, the Application Server does not start automatically at the end of the upgrade. You must start the Application Server manually at the end of the upgrade using the following command:
- To fully support TLS version 1.2 as the default communication protocol used by the RSCD Agent in TrueSight Server Automation 8.9.01 or later, ensure that also the Network Shell component is upgraded to version 8.9.01 or later on any computer that hosts the TrueSight Server Automation Console. The Network Shell is normally upgraded together with the TrueSight Server Automation Console.