Setting up provisioning environments for Windows, Linux, ESX, and ESXi servers
Before you can perform unattended installations of operating systems on servers, you must set up all the functional components of the TrueSight Server Automation provisioning system. Generally, you need to perform these tasks only once unless you are changing the configuration of your provisioning system.
The topics in the following table describe how to set up provisioning environments for Windows, Linux, ESX, and ESXi servers.
|1||To provision operating systems on bare metal computers using the Preboot Execution Environment (PXE), you create a data store directory on a Windows or Linux server. Then you share the data store directory.|
|2||Configure the data store for PXE provisioning|
Configuring the data store sets required values for accessing the data sources for provisioning.
In particular, you define the location of the data store, which is where you store sets of installation files that are used for provisioning operating systems. Data store values are stored in the Data Store system object, which you can edit by using the Property Dictionary.
|3||Stock the data store|
After you set up a data store server, you must stock it with operating system installation files and drivers.
When provisioning a device, the provisioning process uses an image that contains, among other things, device-specific network drivers that interact with the hardware and retrieve configuration information (such as the MAC address) for the device.
To provision Microsoft Windows and Linux machines in your PXE environment, you must create boot image files specifically for use with TrueSight Server Automation provisioning. The system contains placeholders for these files. The type of boot image file that you create depends on the types of machines that you plan to provision.
To prepare for Windows and Linux provisioning, create the appropriate WinPE or Gentoo Linux images that contain generic network drivers that work for most hardware types. As an alternative to creating a Gentoo Linux image, you can use the Skip Linux Pre-Install image option.
After creating the images, you can review and change configuration settings for each image file type.
The TrueSight Server Automation provisioning process requires a DHCP server, which gives the computer being provisioned an IP address and (in a single-database environment) the location of the Application Server.
The instructions for configuring the DHCP server vary depending on the platform (Microsoft Windows or Linux).
|6||Configure the PXE and TFTP servers|
You can configure or reconfigure the PXE and TFTP servers using the PXE/TFTP Server Configuration tool or from the TrueSight Server Automation console.
|7||Configure system package types for Windows and Linux||The System Package Types tab lists the available system package types and lets you edit their definitions or create your own custom system package type.|
|8||Create a system package for Windows and Linux||To perform an unattended installation of an operating system, you must create a system package for each server configuration that you want to install.|
|9||Enabling auto-discovery of devices||As an alternative to manually adding or importing devices into TrueSight Server Automation, you can enable automatic discovery of new devices. TrueSight Server Automation then retrieves the MAC address of any new device from the PXE server as soon as the device is powered up, and adds the device to the list of devices in the TrueSight Server Automation Console.|
If you plan to use Unified Extensible Firmware Interface (UEFI), instead of BIOS, for booting hardware over the network during provisioning, perform several preparatory tasks to enable the use of UEFI.
Note: When using UEFI booting on Linux, you cannot use a Gentoo pre-installation image, and must use the Skip Linux Pre-Install image option (as discussed in step 4). As a result, auto-discovery of devices (step 9) is not possible.
|Linux Provisioning Flowchart||This BMC Contributor topic provides a flowchart that outlines the tasks involved in provisioning Linux servers.|