BBSAMP data set members for PERFORMANCE REPORTER
The following table lists the members and gives a functional description of each member.
See History record format processing for information about the BBSAMP members that are used with the F7 format records. See the MainView for CICS Customization Guide for information about other BBSAMP members.
BBSAMP data set members for PERFORMANCE REPORTER
Member name | Description |
---|---|
BAC0762x | various USERMODs to suppress the recording of CICS Monitoring Program (CMP) data to CICS journals Each USERMOD is for a specific CICS release. |
CMRADAX | sample exit for Adabas version 5 to capture MainView for CICS data after a database call |
CMRADBX | sample exit for Adabas version 5 to capture data before a database call |
CMRBARC | sample JCL to copy a trace log data set to a sequential data set for archival |
CMRBRLOD | sample JCL to reload an archived copy of a trace to a new trace log data set for online viewing |
CMRCBxxN | counterpart to the CMRCOBxx sample programs, same processing but for CICS TS 3.2 and later |
CMRCHRT | sample batch report JCL and control statements |
CMRCJCL | sample JCL program used to decompress detail records |
CMRCOBCN | COBOL format of the history record for CICS TS 3.2 and later (counterpart to CMRCOBCP) |
CMRCOBCP | COBOL format of the history record for CICS TS 3.1 and earlier (counterpart to CMRCOBCN) |
CMRCOBJ1 CMRCOBJ2 | sample JCL to compile and execute VS/COBOL II programs |
CMRCOBnn | counterpart to the CMRCBxxN sample programs for CICS performance statistics reports for CICS TS 3.1 and earlier |
CMRSTJCL | sample JCL to run the CMRSTATS conversion routine for CICS statistical records |
CMRDDTL | sample JCL to delete and define CMRDETL VSAM data sets |
CMRDETL | PRL format of the history record for CICS TS 3.1 and earlier (counterpart to CMRDETLN) |
CMRDETLN | PRL format of the history record for CICS TS 3.2 and later (counterpart to CMRDETL) |
CMRDFSUM | sample JCL to delete and define the VSAM data sets or sequential data sets that hold summarized records created by the CMRSUMD utility |
CMRDJCL | sample JCL to archive data from the CMRDETL data set |
CMRDLDF | sample JCL to delete and define CMRDETL VSAM files and load the initial record into CMRDETL |
CMRDPARM | sample CMRPURG parameters to archive or purge data sets |
CMRJCTXn | sample JCT user journal definitions for various CICS releases |
CMRL | sample JCL to produce PRL reports |
CMRLDTL | sample JCL used by the CMRDETL reload utility--CMRLDTL |
CMRMVJCL | sample JCL to produce PRL reports using multiple VSAM data sets |
CMRN2MCT | MCT definition for MainView for CICS IBM DB2 SMF data |
CMRN2SAS | SAS definition of the MainView for CICS DB2 SMF data |
CMRNDATA | assembler definition of the MainView for CICS SMF data format |
CMRNDB2 | assembler definition of the MainView for CICS DB2 SMF data |
CMRNDMCT | MCT definition for MainView for CICS SMF data |
CMRNDSAS | SAS definition of the MainView for CICS SMF data format |
CMRPRL n | various examples of Performance Reporting Language (PRL) control statements to generate reports |
CMRPURGE | sample JCL to purge and merge recorder file data |
CMRPX* | sample PRL programs to produce CMRSTATS reports |
CMRQT6E | assembler format of the history record for CICS TS 3.2 and later (counterpart to FACTRECM) |
CMRRAP | sample JCL to generate the Resource Analysis Report |
CMRRAPM | macro used to define the resource analysis table used by CMRRAPR and CMRCHRT |
CMRS2AX | sample exit for SYS2K version 12.0 to capture activity after a database call |
CMRS2BX | sample exit for SYS2K version 12.0 to capture activity before a database call |
CMRSASxx | various SAS programs to read CMRDETL data and create reports |
CMRSAxxN | counterpart to the CMRSASxx sample programs; same processing but for the F7 format record |
CMRSITR | sample PRL statements to generate a SIT report |
CMRSJCL | sample JCL used to archive data from single CMRDETL data set |
CMRSOPT | macro that specifies monitored resources, collection intervals, and response time service levels |
CMRSPARM | sample CMRPURG parameters for single CMRDETL data set |
CMRSTATX | sample JCL to process CICS 110 records stored on the SMF data set prior to their use by the CICS statistics program, DFHSTUP, and other products that use 110 records |
CMRSTJCL | sample JCL to run CMRSTATS to convert CICS statistical records to CMRSTATS format |
CMRSUMD | sample program to create four workloads of daily summary records |
CMRSUMD x | sample CMRSUMD control statements to create summary records for various intervals |
CMRSUP01 CMRSUP02 | sample pre- and post-call exit points for monitoring SUPRA version 1.3 |
CMRUACMP | sample user exit to call the CMRCUEX program |
CMRUAPLT | sample PLT program to start CMRUACMP |
CMRURAPM | sample to define the resource analysis table used by the CMRRAP sample program |
CMRUSOPT | sample macro options that define the options table, some of which control the production of CMRSTATS data |
CMRUSR01 | sample of a user exit to switch CMRDETL data sets when one becomes full and needs to be archived |
CMRUSRSD | sample exit called by CMRSUMD summarization utility to give control to a user-written routine when a CMRDETL record is processed |
CSDCMRDF | contains the DEFINE statements for the required program and transaction resources for the MainView for CICS CICS component These definitions are for all releases of CICS. |
CSDOLTDF | contains the DEFINE statements required for the program and transaction resources used by the MainView for CICS common components (for all releases of CICS) |
DCCTXPR | sample exit to the DATACOM DCCTXPR routine |
FACTRECM | sample assembler dsects including the history record for CICS TS 3.1 and earlier |
GENEROL | sample user exit for inclusion in the GENER/OL user task program |
LPCZZMON | sample modification of the MSA LPCZZMON exit |
NCIRDCX1 | sample user exit to capture the Natural program name (for Natural version 2.2. n) |
SAPCMROT | a sample program to capture SAP data in the T6E record of CMRDETL SAPCMROT captures SAP data by calls to the exit, CMRCUEX, which is described in the MainView for CICS Customization Guide. SAPCMROT must be included in the SAP statistics exit (SAPSTEC) to pass data to MainView for CICS through a call to CMRCUEX. |
SAPCMROW | sample of the SAPSTEC exit called by the SAP system to pass data to MainView for CICS through a call to CMRCUEX |
SASIN6EX | SAS sample to read history records for CICS TS 3.1 and earlier (counterpart to SASI6EXN) This sample is for all fields in the standard fixed area and all extension areas. |
SASIN6Ex | SAS samples to read resource entries in history records for CICS TS 3.1 and earlier (counterparts to SASI6ExN) Values for x are
|
SASI6EXN | SAS sample to read history records for CICS TS 3.2 and later (counterpart to SASIN6EX) This sample is for all fields in the standard fixed area and all extension areas. |
SASI6ExN | SAS samples to read resource entries in history records for CICS TS 3.2 and later (counterparts to SASIN6Ex Values for x are
|
SASINXnn | SAS control statements to process statistical and transaction records nn is the record type as described in CMRSTATS: Operational statistics records |
STATREC | Macro used by programs that reference CMRSTATS data |
XNCIRDC1 | sample user exit to capture the Natural program name (for Natural version 2.3.1 or later) |
Comments
Log in or register to comment.