Messages RSS0400 through RSS0499
This topic contains messages for the BMC AMI Security Administrator, BMC AMI Security Privileged Access Manager, and BMC AMI Security Self Service Password Reset products.
These messages have been removed starting with BMC AMI Resident Security Server product version 2.3 SPE2404.
Number | Description |
---|---|
RSS0403I | dataspace built used:size users:userBlocks indexes:indexBlocks Explanation: BMC AMI Security Administrator has built a dataspace of the specified format. User response: No action is required. |
RSS0404E | error allocating names dataspace Explanation: BMC AMI Security Administrator has failed to allocate the names dataspace. User response: Investigate error messages for file permissions. If no messages are found, attempt to restart the STC. If the issue persists, contact BMC Support. |
RSS0405I | hash table entries hashEntries slots hashSlots hits hashHighCollision average hashAverageCollision Explanation: Displays information on the hash table format. User response: No action is required. |
RSS0420D | (racf) userid username Explanation: Active only with RACFTrace. Displays the internal structure of the name dataspace. User response: No action is required. |
RSS0442E | breakglass project projectId configuration error: errorMessage Explanation: Displays details of the configuration error within the specific project parameter block. User response: No action is required. |
The following messages have been removed starting with BMC AMI Security Privileged Access Manager and BMC AMI Security Self Service Password Reset version 2.3 SPE2404.
Number | Description |
---|---|
RSS0430I | breakglass:projectId user userid access requested by currentRequester Explanation: A BMC AMI Security Privileged Access Manager user has been requested. User response: No action is required. |
RSS0431I | breakglass:projectId user userid access for currentRequester approved by currentApprover Explanation: A BMC AMI Security Privileged Access Manager request has been approved. User response: No action is required. |
RSS0432I | breakglass:projectId user userid access accepted by currentRequester Explanation: A BMC AMI Security Privileged Access Manager request has been accepted and is now live. User response: No action is required. |
RSS0433I | breakglass:projectId user userid access expired Explanation: A BMC AMI Security Privileged Access Manager elevation has expired due to the time limit. User response: No action is required. |
RSS0434I | breakglass:projectId user userid access by currentRequester refused Explanation: A BMC AMI Security Privileged Access Manager request has been refused due to lack of authorization. User response: No action is required. |
RSS0435I | breakglass:projectId user userid access for currentRequester refused by currentApprover Explanation: A BMC AMI Security Privileged Access Manager request has been refused by a manager. User response: No action is required. |
RSS0436I | breakglass:projectId user userid access for currentRequester released Explanation: A BMC AMI Security Privileged Access Manager request has been released, ending the elevation. User response: No action is required. |
RSS0437I | breakglass:projectId user userid access in use by currentRequester Explanation: A BMC AMI Security Privileged Access Manager access is now active. User response: No action is required. |
RSS0439I | breakglass:projectId user userid password reset Explanation: A BMC AMI Security Privileged Access Manager pool user ID has been reset. This occurs on startup and when a request is finalized through release or expiry. User response: No action is required. |
RSS0441I | breakglass project projectId owner racfGroupOwner has definedUsers users Explanation: Displays the current status of the BMC AMI Security Privileged Access Manager group for a particular project. User response: No action is required. |
RSS0443I | breakglass projectId user userid connected to group racfGroupName Explanation: The BMC AMI Security Privileged Access Manager user has been connected to the target group. User response: No action is required. |
RSS0444I | breakglass projectId user userid disconnected from group racfGroupName Explanation: The BMC AMI Security Privileged Access Manager user has been disconnected from the target group. User response: No action is required. |
RSS0445E | breakglass projectId user userid error connecting to group racfGroupName Explanation: There was an error connecting the Breakglass user to the target group. User response: Investigate the messages surrounding this error. Running the STC with RACFTrace will help ascertain the issue |
RSS0446I | breakglass:projectId user userid access by currentRequester restored Explanation: Displays details of the active access that has been restored. This usually occurs after shutdown, whereby status is restored from the checkpoint data set. User response: No action is required. |
RSS0447I | BMC PAM:PAMUENT DD not specified, UI user settings will not be saved Explanation: The DD PAMUENT is not specified in the startup JCL procedure. User response: If you want to save user settings, specify the DD PAMUENT in the startup JCL. |
RSS0449D | (bglass) projectId userid state change: oldState to newState Explanation: Displays state changes of the user. This message is only active when AppTrace is configured. User response: No action is required. |
RSS0450I | racf password resets will be issued under userid racfAdministrationUser (userLevel) Explanation: Displays the name of the user ID under which RACF password resets will occur. The user level field can be either SPECIAL for special users or AUTO otherwise. User response: No action is required. |
RSS0451I | breakglass:projectId user userid access for currentRequester cancelled Explanation: The BMC AMI Security Privileged Access Manager elevation has been cancelled. User response: No action is required. |
RSS0452I | breakglass:projectId user userid duration for currentRequester changed by currentApprover to askedTime timeUnit Explanation: The BMC AMI Security Privileged Access Manager duration from the original request has been overridden by the approver to the new value. User response: No action is required. |
RSS0453I | breakglass:projectId user userid alert: user was already connected to groupType group racfGroupName Explanation: The BMC AMI Security Privileged Access Manager request has been processed, but the user was already part of the target group. User response: Check why the user had access to the group, as the user ID should only be connected to the target group when authorized via BMC AMI Security Privileged Access Manager. |
RSS0454I | breakglass projectId user userid error encountered during processing - restoring previous state Explanation: An error was encountered during Breakglass elevation, and the previous RACF state has been restored. User response: Investigate the messages surrounding this error. Running the STC with RACFTrace will help ascertain the issue. |
RSS0460I | sspr access from ipAddress temporarily blocked: actionType count exceeded Explanation: Displays information of the IP address blocked by BMC AMI Security Self Service Password Reset, usually due to too many requests in a short time frame, or multiple simultaneous connections from the same IP address. User response: The lockout can be removed by restarting the STC or, by default, after 15 minutes. The IP lockout parameter can also be utilized to set a custom timeout value. |
RSS0462E | sspr setup for user userid failed for custom field field Explanation: BMC AMI Security Self Service Password Reset setup failed for the specified custom field. User response: Check the custom field exists in RACF and that the STC User has authorization to define this field. |
RSS0463I | sspr setup completed for user userid from ip ipAddress Explanation: BMC AMI Security Self Service Password Reset setup has been completed. User response: No action is required. |
RSS0464I | sspr password reset for user userid from ip ipAddress Explanation: BMC AMI Security Self Service Password Reset reset has been completed. User response: No action is required. |
RSS0465I | sspr access from ipAddress temporarily blocked: multiple userid attempts Explanation: BMC AMI Security Self Service Password Reset has received multiple requests from a single IP address, and has therefore temporarily blocked the address. User response: The lockout can be removed by restarting the STC or, by default, after 15 minutes. The IP lockout parameter can also be utilized to set a custom timeout value. |
RSS0466I | sspr access for userid temporarily blocked: multiple ip addresses used Explanation: BMC AMI Security Self Service Password Reset has received multiple requests to reset a specific user, from multiple IP addresses within a short time frame, and has therefore temporarily blocked the user ID. User response: The lockout can be removed by restarting the STC or, by default, after 15 minutes. The IP lockout parameter can also be utilized to set a custom timeout value. |
RSS0467I | sspr unlock for user userid from ip ipAddress Explanation: BMC AMI Security Self Service Password Reset unlock has been completed. User response: No action is required. |
RSS0471E | sspr password reset for userid rejected by racf rc=returnCode Explanation: BMC AMI Security Self Service Password Reset attempted to set a new password, but was rejected by RACF with the displayed return code. User response: Investigate the RACF return code. Typically you must ensure either that the new password is valid for RACF, or that the STC user has enough authorization to set the new password. |
RSS0475E | sspr configuration error: minimum authentication not defined Explanation: BMC AMI Security Self Service Password Reset requires a minimum authentication of access by email or memorable words. User response: Correct the configuration parameters to abide by the minimum authentication. |
RSS0476I | *warning* sspr configured with minimum authentication Explanation: BMC AMI Security Self Service Password Reset has been configured with the minimum authentication levels of either email access codes or memorable words. User response: BMC advise that SSPR is configured with higher levels of authentication, but no response is required. |
RSS0477I | sspr custom field buffer increased to maximumCustomFieldLength bytes Explanation: BMC AMI Security Self Service Password Reset has updated the maximum CSDATA field size to the new value. User response: No action is required. |
RSS0480I | Breakglass: Running in mode mode (Agent or Master) Explanation: Displays the current mode for the Breakglass instance. User response: No action is required. |
RSS0481I | Breakglass: Environment environment unavailable Explanation: Security Breakglass could not connect to the specified environment. Make sure that the configuration is correct and that the appropriate networking rules have been configured. User response: No action is required. |
RSS0482I | Breakglass: Userid userID does not have equal authority across all project environments Explanation: The requested user ID does not have equal authority to the Security Breakglass profile across every system defined in the SystemList parameter. Security Breakglass defaults to the lowest authority level from all active system. For more information about the SystemList parameter, see Configuring after installation . User response: No action is required. |
RSS0483I | Breakglass: Client: Connected to system on ipAddress Explanation: Security Breakglass successfully connected to the system specified in the message. User response: No action is required. |
RSS0484I | Breakglass: Client: Project project: System sysid enabled Explanation: Security Breakglass associated the server defined in the SystemList parameter with one from the BreakglassServers configuration block. For more information about the SystemList parameter, see Configuring after installation . User response: No action is required. |
RSS0485I | Breakglass: Server: Actioning requestType request Explanation: For the agent systems, this message displays the type of request that was actioned. User response: No action is required. |
Comments
Log in or register to comment.