Space banner

   

This space provides the same content as before, but the organization of the home page has changed. The content is now organized based on logical branches instead of legacy book titles. We hope that the new structure will help you quickly find the content that you need.

CMF MONITOR and MainView for z/OS resource definitions

Use this information to customize the distributed resource definitions for CMF MONITOR and MainView for z/OS resources.

Considerations

Take the following information into consideration when customizing the distributed resource definitions for CMF MONITOR or MainView for z/OS:

  • Several job-related line commands require consideration with regard to security:

    • K kills (terminates) an address space through MEMTERM.

    • P issues a STOP system command for an STC address space.

    • D gets an SDUMP of an address space.

    • E changes the WLM service class of an address space. In addition to the E line command, the WLM service class can be changed by overtyping the old service class value with the new value. Overtyping is secured separately from the E line command because a confirmation is not available.

    • C issues a CANCEL system command for an address space. (C already existed, but its security has been simplified to a single resource definition regardless of the view used.)

    These line commands can also be invoked by using hyperlinks from the EZMJOB and EZMJOBR menus, and the same security applies.

  • If you have both CMF MONITOR and MainView for z/OS, and you want the security calls made for each product to be different, you can proceed as follows:

    1. Customize one set of calls in the default member (suffix 00).

    2. Customize another set of calls in a member with a suffix value of 01 (or any two-digit value up to 99).

    3. Define target definitions for each product that specify the appropriate suffix value in the SerDef Suffix field.

  • The MVScope facility can collect and display data accessed by I/O requests. This data can be displayed in the MSICCW view. Because of the sensitive nature of some of the data that is collected, by default the MainView Security Interface prevents users from collecting or viewing I/O data. To allow all users access to I/O data, disable the following resource in the SERDEF view:

    MVMVS MVScope provide I/O data

    To allow specific users to collect and view I/O data, follow the procedures specified by your ESM for that resource.

Resources

Resource name in SERDEF view

Resource definition and considerations

Addr Space - Table Data

Can the user access address space data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DC201.OD

Addr Space across interval - Table Data

Can the user access address space interval data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DC301.OD

Addr Space Device Use/Delay - Table Data

Can the user access address space device use/delay data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DC193.OD

Addr Space Enq Use/Delay - Table Data

Can the user access address space enqueue use/delay data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DC293.OD

Addr Space in Workload - Table Data

Can the user access address space in workload data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DC101.OD

Address Space HSM Use/Delay - Table Data

Can the user access address space HSM use/delay data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DC393.OD

Address Space JES Use/Delay - Table Data

Can the user access address space JES use/delay data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DC493.OD

Address Space MSG Use/Delay - Table Data

Can the user access address space MSG use/delay data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DC593.OD

Address Space XCF Use/Delay - Table Data

Can the user access address space XCF use/delay data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DC793.OD

Address Space XCFU Use/Delay - Table Data

Can the user access address space XCF user data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DC993.OD

Any Action (MVMVS or CMF Views)

Can the user enter a view action?

Default entity name: BBM.MVMVS.&CONTEXT.AA

Entity name after substitution: BBM.MVMVS. targetid.AA

Channel Path - Table Data

Can the user access channel path data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DC124.OD

Channel Path on LCU - Table Data

Can the user access channel path on LCU data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DC224.OD

CMF System Interval - Table Data

Can the user access CMF system interval data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DC108.OD

CMF XDS API CX10XDGS Action

(CMF MONITOR only)

Can the user access cross-system type 79 performance snapshot data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTACTION.PA

Entity name after substitution: BBM.MVMVS. targetid.XDGS.PA

This resource is distributed as a disabled, rather than an enabled, security call.

CMF XDS API CX10XDQY/ CX10XDRC Actions

(CMF MONITOR only)

Can the user access a cross-system SMF buffer?

Class name: FACILITY

Default entity name: ERBSDS.SMFDATA

CMF XDS API CX10XDRS Action

(CMF MONITOR only)

Default entity name: BBM.MVMVS.&CONTEXT.&INTACTION.PA

Entity name after substitution: BBM.MVMVS. targetid.XDRS .PA

Common Storage - Cdre - Table Data

Can the user access common storage detail data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DCE46.OD

Common Storage - Table Data

Can the user access common storage data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DCE39.OD

Coupling Facility - Table Data

Can the user access coupling facility data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DCE20.OD

CPU - Table Data

Can the user access CPU data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DCE05.OD

Crypto Hardware - Table Data

Can the user access Crypto hardware data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid. DE0D0.OD

Crypto ICSF - Table Data

Can the user access Crypto ICSF data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid. DE0F0.OD

Data Collect Stat - Action - Activate

Can the user enter the A command in the DCSTAT view?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.&INTACTION.OA

Entity name after substitution: BBM.MVMVS. targetid.DC427.ACTIVATE.OA

Data Collect Stat - Action - Deact

Can the user enter the D command in the DCSTAT view?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.&INTACTION.OA

Entity name after substitution: BBM.MVMVS. targetid.DC427.DEACT.OA

Data Collect Stat - Any Action

Can the user enter a DCSTAT view action?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.AO

Entity name after substitution: BBM.MVMVS. targetid.DC427.AO

Data Collect Stat - Table Data

Can the user access data for the DCSTAT view?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DC427.OD

DataSet I/O - Table Data

Can the user access data set I/O data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DC327.OD

DataSet Usage - Table Data

Can the user access data set usage and delay data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DCE2E.OD

Default - Any Table Actions

Can the user enter a view action for the current CMF MONITOR or MainView for z/OS view?

This default resource controls a subset of similar individual resources. Enabling, disabling, or changing this resource automatically enables, disables, or changes all resources with the following entity name:

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.AO

Entity name after substitution: BBM.MVMVS. targetid.tableid.AO

Specific resources with this same default entity name can be enabled, disabled, or changed on an individual basis.

Default - Primary Actions (All Views)

This default resource controls the following specific actions:

  • MVMVS Primary Action - CSMON

  • MVMVS Primary Action - MVSCOPE

  • MVMVS Primary Action - SYSPROG

This default resource controls the following product job actions:

  • MVMVS Product Action - MVS CANCEL (C)

  • MVMVS Product Action - SVC Dump (D)

  • MVMVS Product Action - Change SRVCLS (E)

  • MVMVS Product Action - Kill (MEMTERM) (K)

  • MVMVS Product Action - MVS STOP (P)

  • MVMVS Product Action - Overtype SRVCLS

(MainView for z/OS only)

Can the user perform the following actions:

  • Enter the CSMON, SYSPROG or MVSCOPE primary commands?

  • Enter the C, D, E, K, or P product job actions or EZMJOB, EZMJOBR hyperlink equivalents?

  • Overtype a job's WLM service class to change it?

Default entity name: BBM.MVMVS.&CONTEXT.&INTACTION.PA

Entity Names after Substitution:

  • BBM.MVMVS. targetid.CSMON.PA
  • BBM.MVMVS. targetid. MVSCOPE.PA
  • BBM.MVMVS. targetid.SYSPROG.PA
  • BBM.MVMVS. targetid. CANCELAS.PA
  • BBM.MVMVS. targetid. DUMPADR.PA
  • BBM.MVMVS. targetid. CHANGESC.PA
  • BBM.MVMVS. targetid.KILLADR.PA
  • BBM.MVMVS. targetid.STOPADR.PA
  • BBM.MVMVS. targetid.SCOVRTYP.PA

Note

SYSPROG Services can be accessed through MainView for z/OS and through TSO as line commands. They can also be executed as a batch job or started task. To secure these services absolutely, you must secure SYSPROG through the BBSEC member of SYS1.PARMLIB or the designated data set. See Implement security for MainView SYSPROG Services for information about securing individual services. See the MainView for z/OS Customization Guide for more information.

Default - Specific Table Action

Can the user enter specific view actions in specific CMF MONITOR or MainView for z/OS views?

Note

If you change this resource by using the SERDEF view in CMF MONITOR, the resources starting with MVMVS are changed as well. No effect occurs to CMF MONITOR for the MainView for z/OS resources, because the associated views are not displayed in CMF MONITOR. However, if MainView for z/OS is installed in the same SMP zone or in a shared DASD environment, both products use the same security parameter library. Changing this resource in CMF MONITOR does impact MainView for z/OS.

This default resource controls a subset of similar resources. Enabling, disabling, or changing this resource automatically enables, disables, or changes all resources with the following entity name:

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.&INTACTION.OA

Entity name after substitution: BBM.MVMVS. targetid.tableid.actionid.OA

Specific resources belonging to this subset can be enabled, disabled, or changed on an individual basis.

Default - Table Data

Can the user access a view in CMF MONITOR, MainView for z/OS or both?

This default resource controls a subset of similar individual resources. Enabling, disabling, or changing this resource automatically enables, disables, or changes all resources with the following entity name:

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.tableid.OD

Specific resources with this same default entity name can be enabled, disabled, or changed on an individual basis.

Device - Table Data

Can the user access device data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DCE22.OD

Enqueue - Table Data

Can the user access enqueue data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DCE0B.OD

Exception Admin - Action - Active Sampler

(MainView for z/OS only)

Can the user enter the Active AEW Sampler command from a MainView for z/OS view?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.&INTACTION.OA

Entity name after substitution: BBM.MVMVS. targetid.DYEM0.ACTSAMPL.OA

Exception Admin - Action - Delete Member

(MainView for z/OS only)

Can the user enter the Delete Member command from a MainView for z/OS view?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.&INTACTION.OA

Entity name after substitution: BBM.MVMVS. targetid.DYEM0.DELMEM.OA

Exception Admin - Action - Display

(MainView for z/OS only)

Can the user enter the Display command from a MainView for z/OS view?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.&INTACTION.OA

Entity name after substitution: BBM.MVMVS. targetid.DYEM0.DISPLAY.OA

Exception Admin - Action - Read Directory

(MainView for z/OS only)

Can the user enter the Read Directory command from a MainView for z/OS view?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.&INTACTION.OA

Entity name after substitution: BBM.MVMVS. targetid.DYEM0.READDIR.OA

Exception Admin - Action - Read Member

(MainView for z/OS only)

Can the user enter the Read Member command from a MainView for z/OS view?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.&INTACTION.OA

Entity name after substitution: BBM.MVMVS. targetid.DYEM0.READMEM.OA

Exception Admin - Action - Start AEW

(MainView for z/OS only)

Can the user enter the Start AEW command from a MainView for z/OS view?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.&INTACTION.OA

Entity name after substitution: BBM.MVMVS. targetid.DYEM0.STRTAEW.OA

Exception Admin - Action - Stop AEW

(MainView for z/OS only)

Can the user enter the Stop AEW command from a MainView for z/OS view?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.&INTACTION.OA

Entity name after substitution: BBM.MVMVS. targetid.DYEM0.STOPAEW.OA

Exception Admin - Action - Write Member

(MainView for z/OS only)

Can the user enter the Write Member command from a MainView for z/OS view?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.&INTACTION.OA

Entity name after substitution: BBM.MVMVS. targetid.DYEM0.WRITEMEM.OA

Exception Admin - Any Action

(MainView for z/OS only)

Can the user enter a view action for the current MainView for z/OS view?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.AO

Entity name after substitution: BBM.MVMVS. targetid.DYEM0.AO

Exception Admin - Table Data

(MainView for z/OS only)

Can the user access system interval data for a MainView for z/OS view?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DYEM0.OD

HSM Detail Data - Table Data

Can the user access HSM detail data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DCE09.OD

JESTATR - Action - Start Job

(MainView for z/OS only)

Can the user enter the Start Job command from the JESTATR view?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.&INTACTION.OA

Entity name after substitution: BBM.MVMVS. targetid.DC827.StartJob.OA

JESTATR - Any Action

(MainView for z/OS only)

Can the user enter any action from the JESTATR view?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.AO

Entity name after substitution: BBM.MVMVS. targetid.DC827.AO

JESTATR - ReqdJobs - Table Data

(MainView for z/OS only)

Can the user access JESTATR data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DC827.OD

Job Step - Table Data

Can the user access job step data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DCE02.OD

Logical Control Unit - Table Data

Can the user access logical control unit data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DCE23.OD

Long-Term Addr Space - Table Data

Can the user access long-term address space data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DCE10.OD

Long-Term Device - Table Data

Can the user access long-term device data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DCE18.OD

Long-Term Summary - Table Data

Can the user access long-term summary data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DCE21.OD

Lpar/Domain - Table Data

Can the user access LPAR/domain data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DCE04.OD

MVMVS Consoles - Action - Command

(MainView for z/OS only)

Can the user enter an MVS command from any view of MainView for z/OS?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.&INTACTION.OA

Entity name after substitution: BBM.MVMVS. targetid.DC227.CMD.OA

MVMVS Consoles - Any Action

(MainView for z/OS only)

Can the user enter a view action in any MainView for z/OS view?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.AO

Entity name after substitution: BBM.MVMVS. targetid.DC227.AO

MVMVS Consoles - Table Data

(MainView for z/OS only)

Can the user access console data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DC227.OD

MVMVS Consoles List - Table Data

(MainView for z/OS only)

Can the user access console list data for a MainView for z/OS view?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DC127.OD

MVMVS DataSpace - Table Data

(MainView for z/OS only)

Can the user access data space data for a MainView for z/OS view?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DCE33.OD

MVMVS MVScope provide I/O data

(MainView for z/OS only)

Can the user start a monitor set that provides I/O data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTACTION.PA

Entity name after substitution: BBM.MVMVS. targetid.MVSCPDAT.PA

MVMVS OMVS Process - Table Data

Can the user access OMVS process data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DCE34.OD

MVMVS Primary Action - CSMON

(MainView for z/OS only)

Can the user enter the CSMON command from a MainView for z/OS view?

Default entity name: BBM.MVMVS.&CONTEXT.&INTACTION.PA

Entity name after substitution: BBM.MVMVS. targetid.CSMON.PA

MVMVS Primary Action - MVSCOPE

(MainView for z/OS only)

Can the user start an MVScope monitor set with the MVSCOPE primary command?

Default entity name: BBM.MVMVS.&CONTEXT.&INTACTION.PA

Entity name after substitution: BBM.MVMVS. targetid.MVSCOPE.PA

MVMVS Primary Action - SYSPROG

(MainView for z/OS only)

Can the user enter the SYSPROG command from a MainView for z/OS view in the current product?

Default entity name: BBM.MVMVS.&CONTEXT.&INTACTION.PA

Entity name after substitution: BBM.MVMVS. targetid.SYSPROG.PA

Note

SYSPROG services can be accessed through MainView for z/OS, through TSO as RESOLVE commands, and in batch jobs and started tasks. To secure these services absolutely, you must secure SYSPROG through the BBSEC member of SYS1.PARMLIB. See the MainView for z/OS Customization Guide for more information.

MVMVS Product Action - Change SRVCLS

(MainView for z/OS only)

Can the user enter the E line command or use the Change Service Class hyperlink from job related views?

Default entity name: BBM.MVMVS.&CONTEXT.&INTACTION.PA

Entity name after substitution: BBM.MVMVS. targetid. CHANGESC.PA

MVMVS Product Action - Kill (MEMTERM)

(MainView for z/OS only)

Can the user enter the K line command or Kill Address Space hyperlink to use MEMTERM to terminate an address space from job related views?

Default entity name: BBM.MVMVS.&CONTEXT.&INTACTION.PA

Entity name after substitution: BBM.MVMVS. targetid. KILLADR.PA

MVMVS Product Action - MVS CANCEL

(MainView for z/OS only)

Can the user enter the C line command or use the Cancel Address Space hyperlink from job related views?

Default entity name: BBM.MVMVS.&CONTEXT.&INTACTION.PA

Entity name after substitution: BBM.MVMVS. targetid. CANCELAS.PA

MVMVS Product Action - MVS STOP

(MainView for z/OS only)

Can the user enter the P line command or use the Stop Address Space hyperlink from job related views?

Default entity name: BBM.MVMVS.&CONTEXT.&INTACTION.PA

Entity name after substitution: BBM.MVMVS. targetid.STOPADR.PA

MVMVS Product Action - Overtype SRVCLS

(MainView for z/OS only)

Can the user overtype a job's WLM service class to change it?

Default entity name: BBM.MVMVS.&CONTEXT.&INTACTION.PA

Entity name after substitution: BBM.MVMVS. targetid.SCOVRTYP.PA

MVMVS Product Action - SVC Dump

(MainView for z/OS only)

Can the user enter the D line command or use the Dump Address Space hyperlink from job related views?

Default entity name: BBM.MVMVS.&CONTEXT.&INTACTION.PA

Entity name after substitution: BBM.MVMVS. targetid. DUMPADR.PA

MVMVS Sys Intvl - Table Data

(MainView for z/OS only)

Can the user access system interval data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DC208.OD

MVMVS Warning - Table Data

(MainView for z/OS only)

Can the user access any MainView for z/OS view?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DYEM0.OD

MVMVS Wkld List - Action - Alt/Rename

(MainView for z/OS only)

Can the user enter the Alt/Rename command from the WKLIST view?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.&INTACTION.OA

Entity name after substitution: BBM.MVMVS. targetid.DC627.ALTRWKLD.OA

MVMVS Wkld List - Action - Delete

(MainView for z/OS only)

Can the user enter the Delete command from the WKLIST view?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.&INTACTION.OA

Entity name after substitution: BBM.MVMVS. targetid.DC627.DLETWKLD.OA

MVMVS Wkld List - Action - Save

(MainView for z/OS only)

Can the user enter the SAVE command from the WKLIST view?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.&INTACTION.OA

Entity name after substitution: BBM.MVMVS. targetid.DC627.SAVEWKLD.OA

MVMVS Wkld List - Action - Update

(MainView for z/OS only)

Can the user enter the Update command from the WKLIST view?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.&INTACTION.OA

Entity name after substitution: BBM.MVMVS. targetid.DC627.UPDTWKLD.OA

MVMVS Wkld List - Any Action

(MainView for z/OS only)

Can the user enter any command from the WKLIST view?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.AO

Entity name after substitution: BBM.MVMVS. targetid.DC627.AO

MVMVS Wkld List - Table Data

(MainView for z/OS only)

Can the user access the WKLIST view?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DC627.OD

MVScope - Action - ADD a Monitor Set

(MainView for z/OS only)

Can the user add a monitor set with the ADD line command?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.&INTACTION.OA

Entity name after substitution: BBM.MVMVS. targetid.DCE15.ADD.OA

MVScope - Action - ADD MS line command

(MainView for z/OS only)

Can the user add a monitor set with the ADD line command?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.&INTACTION.OA

Entity name after substitution: BBM.MVMVS. targetid.DCE15.ADDLC.OA

MVScope - Action - CHAnge a Monitor Set

(MainView for z/OS only)

Can the user change a monitor set with the CHA line command from the MSLIST view?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.&INTACTION.OA

Entity name after substitution: BBM.MVMVS. targetid.DCE15.CHANGE.OA

MVScope - Action - DELete a Monitor Set

(MainView for z/OS only)

Can the user stop a monitor set with the DEL line command from the MSLIST view?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.&INTACTION.OA

Entity name after substitution: BBM.MVMVS. targetid.DCE15.DELETE.OA

MVScope - Action - M command Asiw

(MainView for z/OS only)

Can the user start an MVScope monitor set with the M line command from job views? These views include JCPU, JCPUZ, JCPUR, JIO, JIOZ, JIOR, JOVER, JOVERZ, JOVERR, JPAGDM, JPAGOV, JPAGOVZ, JPAGOVR, JPASW, JPASWZ, JSRM, JSRMZ, JSRMR, JSTOR, JSTORZ, JSTORR, JSUM, JSTAT, JSTASTZ, JUSE, JUSEZ, and JUSER.

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.&INTACTION.OA

Entity name after substitution: BBM.MVMVS. targetid.DC101.MLCMD.OA

MVScope - Action - M command Asre

(CMF MONITOR Online only)

Can the user start an MVScope monitor set with the M line command from job views? These views include ARD and ARDZ.

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.&INTACTION.OA

Entity name after substitution: BBM.MVMVS. targetid.DC201.MLCMD.OA

MVScope - Action - M command Dsre

(MainView for z/OS only)

Can the user start an MVScope monitor set with the M line command on data set usage views?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.&INTACTION.OA

Entity name after substitution: BBM.MVMVS. targetid.DCE2E.MLCMD.OA

MVScope - Action - M command Dxre

(MainView for z/OS only)

Can the user start an MVScope monitor set with the M line command on device views?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.&INTACTION.OA

Entity name after substitution: BBM.MVMVS. targetid.DCE22.MLCMD.OA

MVScope - Action - M command Jsre

(MainView for z/OS only)

Can the user start an MVScope monitor set with the M line command on JSSTOR views?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.&INTACTION.OA

Entity name after substitution: BBM.MVMVS. targetid.DCE02.MLCMD.OA

MVScope - Action - M command Wusr

(MainView for z/OS only)

Can the user start an MVScope monitor set with the M line command from wait user views? These views include JUDEV, JUDEVZ, JDDEV, JDDEVZ, DUJOB, and DDJOB.

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.&INTACTION.OA

Entity name after substitution: BBM.MVMVS. targetid.DC193.MLCMD.OA

MVScope - Action - M command WusrENQ

(MainView for z/OS only)

Can the user start an MVScope monitor set with the M line command from wait user ENQ views? These views include JDENQ, JDENQZ, JUENQ, and JUENQZ.

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.&INTACTION.OA

Entity name after substitution: BBM.MVMVS. targetid.DC293.MLCMD.OA

MVScope - Action - M command WusrHSM

(MainView for z/OS only)

Can the user start an MVScope monitor set with the M line command from wait user HSM views? These views include JHSMD, JHSMDZ, and JHSMSTAT.

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.&INTACTION.OA

Entity name after substitution: BBM.MVMVS. targetid.DC393.MLCMD.OA

MVScope - Action - M command WusrJES

(MainView for z/OS only)

Can the user start an MVScope monitor set with the M line command from wait user JES views? These views include JJESD and JJESDZ.

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.&INTACTION.OA

Entity name after substitution: BBM.MVMVS. targetid.DC493.MLCMD.OA

MVScope - Action - M command WusrMSG

(MainView for z/OS only)

Can the user start an MVScope monitor set with the M line command from wait user MSG views? These views include JMSGD and JMSGDZ.

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.&INTACTION.OA

Entity name after substitution: BBM.MVMVS. targetid.DC593.MLCMD.OA

MVScope - Action - M command WusrXCF

(MainView for z/OS only)

Can the user start an MVScope monitor set with the M line command from wait user XCF views? These views include JXCFD and JXCFDZ.

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.&INTACTION.OA

Entity name after substitution: BBM.MVMVS. targetid.DC793.MLCMD.OA

MVScope - Action - MONitor start

(MainView for z/OS only)

Can the user start an MVScope monitor set with the MON line command from the MSLIST view?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.&INTACTION.OA

Entity name after substitution: BBM.MVMVS. targetid.DCE15.MONITOR.OA

MVScope - Action - STOp a Monitor Set

(MainView for z/OS only)

Can the user stop a monitor set with the STO line command from the MSLIST view?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.&INTACTION.OA

Entity name after substitution: BBM.MVMVS. targetid.DCE15.STOP.OA

MVScope - Any Action

(MainView for z/OS only)

Can the user enter any action from MVScope views?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.AO

Entity name after substitution: BBM.MVMVS. targetid.DCE15.AO

MVScope and MVMVS Asiw - Any Action

(MainView for z/OS only)

Can the user enter any action from job views (including M line commands for MVScope)? These views include JCPU, JCPUZ, JCPUR, JIO, JIOZ, JIOR, JOVER, JOVERZ, JOVERR, JPAGDM, JPAGOV, JPAGOVZ, JPAGOVR, JPASW, JPASWZ, JSRM, JSRMZ, JSRMR, JSTOR, JSTORZ, JSTORR, JSUM, JSTAT, JSTASTZ, JUSE, JUSEZ, and JUSER.

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.AO

Entity name after substitution: BBM.MVMVS. targetid.DC101.AO

MVScope and MVMVS Asre - Any Action

(CMF MONITOR Online only)

Can the user enter any action from job views (including M line commands for MVScope)? These views include ARD and ARDZ.

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.AO

Entity name after substitution: BBM.MVMVS. targetid.DC201.AO

MVScope and MVMVS Dsre - Any Action

(MainView for z/OS only)

Can the user enter any action from data set level views (including M line commands for MVScope)? These views include DSVOL, DSVOLZ, DSJOB, DSJOBZ, DSDSN, and DSDSNZ.

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.AO

Entity name after substitution: BBM.MVMVS. targetid.DCE2E.AO

MVScope and MVMVS Dxre - Any Action

(MainView for z/OS only)

Can the user enter any action from device views (including M line commands for MVScope)? These views include DEV, DEVZ, DEVSTAT, DEVSTATZ, DEVR, LDEV, PDEV, and SDEV.

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.AO

Entity name after substitution: BBM.MVMVS. targetid.DCE22.AO

MVScope and MVMVS Jsre - Any Action

(MainView for z/OS only)

Can the user enter any action from job step views (including M line commands for MVScope)? These views include JSOVER, JSOVERZ, JSUSE, JSUSEZ, JSCPU, JSCPUZ, JSIO, JSIOZ, JSSTOR, JSSTORZ, JSPAGOV, JSPAGOVZ, JSSRM, JSSRMZ, JSTERM, and JSTERMZ.

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.AO

Entity name after substitution: BBM.MVMVS. targetid.DCE02.AO

MVScope and MVMVS Wusr - Any Action

(MainView for z/OS only)

Can the user enter any action from job delay views (including M line commands for MVScope)? These views include JUDEV, JUDEVZ, JDDEV, JDDEVZ, DUJOB, and DDJOB.

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.AO

Entity name after substitution: BBM.MVMVS. targetid.DC193.AO

MVScope and MVMVS WusrEnq - Any Action

(MainView for z/OS only)

Can the user enter any action from ENQ delay views? These views include JDENQ, JDENQZ, JUENQ, and JUENQZ.

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.AO

Entity name after substitution: BBM.MVMVS. targetid.DC293.AO

MVScope and MVMVS WusrHSM - Any Action

(MainView for z/OS only)

Can the user enter any action from HSM delay views? These views include JHSMD, JHSMDZ, and JHSMSTAT.

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.AO

Entity name after substitution: BBM.MVMVS. targetid.DC393.AO

MVScope and MVMVS WusrJES - Any Action

(MainView for z/OS only)

Can the user enter any action from JES delay views? These views include JJESD and JJESDZ.

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.AO

Entity name after substitution: BBM.MVMVS. targetid.DC493.AO

MVScope and MVMVS WusrMSG - Any Action

(MainView for z/OS only)

Can the user enter any action from message delay views? These views include JMSGD and JMSGDZ.

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.AO

Entity name after substitution: BBM.MVMVS. targetid.DC593.AO

MVScope and MVMVS WusrXCF - Any Action

(MainView for z/OS only)

Can the user enter any action from XCF delay views? These views include JXCFD and JXCFDZ.

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.AO

Entity name after substitution: BBM.MVMVS. targetid.DC793.AO

MVScope CCW and I/O data - Table Data

(MainView for z/OS only)

Can the user access data for MVScope I/O CCW and data views?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DCE2B.OD

MVScope DD Entry - Table Data

(MainView for z/OS only)

Can the user access data for MVScope DD views?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DCE13.OD

MVScope Execution Unit - Table Data

(MainView for z/OS only)

Can the user access data for MVScope execution unit views?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DCE11.OD

MVScope I/O Interrupt - Table Data

(MainView for z/OS only)

Can the user access data for MVScope I/O interrupt views?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DCE2A.OD

MVScope Messages - Table Data

(MainView for z/OS only)

Can the user access data for MVScope explanatory texts views?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DC727.OD

MVScope Monitor Set - Table Data

(MainView for z/OS only)

Can the user access data for MVScope monitor set views?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DCE15.OD

MVScope Named Program Virt Stor - Table Data

(MainView for z/OS only)

Can the user access data for MVScope-named program virtual storage views?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DC512.OD

MVScope Program Virt Stor - Table Data

(MainView for z/OS only)

Can the user access data for MVScope program virtual storage views?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DC412.OD

MVScope PSW Sample - Table Data

(MainView for z/OS only)

Can the user access data for MVScope PSW sample views?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DCE14.OD

MVScope Time 8 Buckets - Table Data

(MainView for z/OS only)

Can the user access data for MVScope time 8 bucket views?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DCE1F.OD

MVScope Time Buckets - Table Data

(MainView for z/OS only)

Can the user access data for MVScope time bucket views?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DCE1E.OD

MVScope Virtual Storage - Table Data

(MainView for z/OS only)

Can the user access data for MVScope virtual storage views?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DC112.OD

MVScope Volume Extent - Table Data

(MainView for z/OS only)

Can the user access data for MVScope volume extent views?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DCE2C.OD

Page Dataset - Table Data

Can the user access page data set data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DCE06.OD

Realtime Enqueue/

Reserve - Table Data

Can the user access enqueue/reserve data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DCE0A.OD

Short-term Address Space - Table Data

Can the user access short-term address space data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid. DE720.OD

Short-term Device - Table Data

Can the user access short-term device data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid. DE710.OD

Short-term Summary - Table Data

Can the user access short-term summary data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid. DE700.OD

SMS Storage Group - Table Data

Can the user access SMS storage group data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DCE03.OD

SPDataSpace - Action - Cancel Changes

Can the user cancel changes made to contents of data space views?

Note

This resource definition has been turned off under SERDEF.

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.&INTACTION.OA

Entity name after substitution: BBM.MVMVS. targetid.DD100.CANCEL.OA

SPDataSpace - Action - Change Offset

Can the user change offset of contents being displayed in data space views?

Note

This resource definition has been turned off under SERDEF.

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.&INTACTION.OA

Entity name after substitution: BBM.MVMVS. targetid.DD100.OFFSET.OA

SPDataSpace - Action - Zap Contents

Can the user alter storage from data space views?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.&INTACTION.OA

Entity name after substitution: BBM.MVMVS. targetid.DD100.CONTENTS.OA

SPDataSpace - Any Action

Can the user enter any action from data space views?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.AO

Entity name after substitution: BBM.MVMVS. targetid.D1000.AO

SPDataSpace - View - Contents

Can the user view data from data spaces?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DD100.OD

Spin & Suspend Locks - Table Data

Can the user access data about spin locks and suspend locks?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid. DE160.OD

SRM Domain - Table Data

Can the user access SRM domain data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DCE29.OD

Summary - Table Data

Can the user access summary data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DCE38.OD

Swap Dataset - Table Data

Can the user access swap data set data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DCE07.OD

System CPU - Table Data

Can the user access system CPU data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DCE35.OD

System Paging - Table Data

Can the user access system paging data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DCE36.OD

System Swap - Table Data

Can the user access system swap data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DCE37.OD

Workload - Table Data

Can the user access workload data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DCE0E.OD

Workload - WLM Ext Period - Table Data

Can the user access workload data for WLM Extend Period views?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DCE47.OD

Workload - WLM Server Mcre - Table Data

Can the user access WLM enclave classification data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DCE49.OD

Workload - WLM Server Mtre - Table Data

Can the user access WLM address space data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DCE48.OD

Workload - WLM Server Mwre - Table Data

Can the user access WLM server address space data?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DCE54.OD

Workload - WLM Subsystem - Table Data

Can the user access workload data for WLM subsystem views?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DCE44.OD

XCF Member - Table Data

Can the user access data for XCF Member views?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DCE52.OD

XCF Path - Table Data

Can the user access data for XCF Path views?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DCE50.OD

XCF System - Table Data

Can the user access data for XCF System views?

Default entity name: BBM.MVMVS.&CONTEXT.&INTTABLE.OD

Entity name after substitution: BBM.MVMVS. targetid.DCE51.OD


Was this page helpful? Yes No Submitting... Thank you

Comments