Skip to Content

Control statement summary

The following figure shows the valid control statement commands, keywords, and values that you can specify in the SYSIN data set for a Log Analyzer analysis job.

The required portion of the command or keyword is shown in uppercase bold type; the optional portion of the command or keyword is shown in lowercase regular type. The default value (if any) for a keyword is underscored.

Related topic

Samples-and-syntax-reference

This syntax is include in member LUISYNTX of the sample library. For details about how to use this syntax, see Working-with-BMC-AMI-Log-Analyzer-for-IMS-jobs.

ANalyze
ActiveOLDS=NO | YES
DB2LOG=<db2LogDataSet> | DB2BSDS=<db2BootstrapDataSet>
DLILOG=(data.set,Rnn)** Use for APPCHECK
DLILOG=(dsn,Rnn,unit,volser) ** Use for UNCATALOGED   ** Use for APPCHECK
ELAPSEDTIME=YES | NO
IMSID=ALL | imsid | (imsid1, imsid2, ...)
INPExt=<extractDataSet>
IPRJRNL=<journalDataSet> | IPRPREFIX=<journalPrefix>
JOBNAME=jobname | (jobname1, jobname2,...)** Use for APPCHECK
LIMit=9999999999 | <nnnnnnnnnn>
LIMITDB2=9999999999 | <nnnnnnnnnn>
LogRecordCodesPDS=<logCodeDataSet>
MADUNLD=<maqExtractDataSet>
MAXLogs=100 | 999 | <nnn> | (<nnn>, <abendCode>) | (<nnn>, <returnCode>)
MQEXT=<mqExtractdataSet>
PRILOG=SLDS | DLI | BOTH ** Use for APPCHECK
RECON=<reconDataSet> | (<reconDataSet1>, <reconDataSet2>, <reconDataSet3>)
SKIP=0 | <nnnnnnnnn>
SKIPDB2=0 | <nnnnnnnnn>
SLDS=(<sldsDataSet>,R<nn>,<unit>,<volser>)
TIMEZone=LOCAL | GMT | ORIGINAL | (+hhmm) | (-hhmm)
               
*

INTerval
START=FIRST | <yyyyddd/hhmmssth> | -ddd | <logSequenceNumber>
STOP=LAST | <yyyyddd/hhmmssth> | -ddd | <logSequenceNumber>
*

FILter
CONTent0103=DATA | ALL
LogRecordCodes=ALL | <nn> | <n>* | ¬<nn> | <nnnn> | ,<nnn>* | ¬<nnnn> | <member> | (<nn>,<n>*, ¬<nn>,<nnnn>,<nnn>*, ¬<nnnn>,<member>, ...)
SELect=(((<subkeyword>=<value>) AND (<subkeyword>=<value>))
OR (<subkeyword> NOT=<value>))
*valid operands for ETIME and CPU: < > => >= <= =<

*SELECT subkeywords: ABENDS=YES
nnAPPC_LTERM=<lterm>
CICSTRAN=<transaction>
nnCLIENTID=<clientId>
CONTENT=(C'string', logrec, offset, length
CPU <operand> <ssss> | <hh:mm:ss.nnnnnn> | <mm:ss.nnnnnn> | <ss.nnnnnn>
DBD=(<dbdName>,<dsId> |<dbdName>,<areaName> | <dbdName>,<areaName>,<rba>)
nnDEST=<destination>
DRRN=<drrn>
ETIME <operand> <ssss> | <hh:mm:ss.nnnnnn> | <mm:ss.nnnnnn> | <ss.nnnnnn>
FIELD=(<log Code>,<field name>,<value>)
nnLTERM=<lterm>
nnLUNAME=<luName> MPR=<jobName>
nnNODE=<node>
nnOIMS=<originatingIms>
nnORIGIN=<source>
nnPORT#=<nnnn>
PSB=<psbName>
PST=<pstId>
RDBD=(<dbdName>)
RCVYTKN='<recoverytoken>'         
nnTMEMBER=<tmember Name>
nnTPIPE=<tpipeName
nnTPNAME=<tpName>
nnTRAN=<transaction>
UDBD=(<dbdName>,<dsId> |<dbdName>,<areaName> | <dbdName>,<areaName>,<rba>)
UOW1='<characterImsID16characterUowID>'
<nn>USERID=<userId>


*

REPorts
   ABEND=ALL | <nnnnnnnnn>
   APPCHECK =ALL | <expressions>
   AUDIT=ALL | <nnnnnnnnn> | <expressions>
   DEADLOCK=ALL
   DUMPForm=BOTH | CHAR | HEX
   DUMPRec=([ALL | <nnnnnnnnn>], offset, length)
   DUMPVert=([ALL | <nnnnnnnnn>], offset, length)
   LogRecordCodes=ALL | <nn> | <n>* | ¬<nn> |  <nnnn> | <nnn>* | ¬<nnnn> | <member> |
                 (<nn>,<n>*, ¬ <nn>,<nnnn>,<nnn>*, ¬<nnnn>,<member>, ...)
   LuowDETail=ALL | <nnnnnnnnn> | (LUOWluowId,LUOWluowId,...)
   LuowDETailData=(offset, length)
   LuowSUMM=ALL | <nnnnnnnnn>
   LuowTSeq=ALL | <nnnnnnnnn>
   OFFSET=HEX | DECIMAL | DEC
   ORPHANS=ALL | <nnnnnnnnn>
   PARSERec=ALL | <nnnnnnnnn>
   RBASTATS=ALL | TOTALS
   SUMMary=ALL | <nnnnnnnnn>

EXTRact
   DCB=<dataSetName>
   DATAClass=<className>
   DSN=<dataSetName>
   LIKE=<dataSetName>
   MGMTClass=<className>
   PRISPace=<nnnnnnnnn>
   SECSPace=<nnnnnnnnn>
   SPaceUnits=CYL | TRK
   STORClass=<className>
   VOLSer=<volser>
   UNIT=<unitName>
   VOLUMECOUNT=<nn>
*

INDEXFile
   DATAClass=<className>
   DSN=<dataSetName>
   MGMTClass=<className>
   PRISPace=<nnnnnnnnn>
   SECSPace=<nnnnnnnnn>
   SPaceUnits=CYL | TRK
   STORClass=<className>
   VOLSer=<volser>
*

WORKFile
   MGMTClass=<className>
   STORClass=<className>
   DATAClass=<className>
   VOLSer=<volser>
   UNIT=<unitName>
   PRISPace=<nnnnnnnnn>
   SECSPace=<nnnnnnnnn>
   SPaceUnits=CYL | TRK
*

END
*


 

Tip: For faster searching, add an asterisk to the end of your partial query. Example: cert*

BMC AMI Log Analyzer for IMS 1.7