Specifying runtime data set information

Use the following procedure to specify information for the runtime data sets.

For more information, view the Quick Course Installation System - Runtime Library Options.

Note: You must already be logged into BMC Support Central or you will receive a Page Not Found error.

For a list of Quick Courses about the Installation System, see PDFs and videos

To specify runtime data set information

  1. On the Execute Project panel, from the list of configuration actions, select Set Runtime Data Set High Level Qualifiers and press Enter.

    BMIPPRJE                        Execute Project 
     Command ===> _________________________________________________________________ 
     
     Project Name . . . USER1
     Description  . . . Sandbox                                
     JCL Data Set . . . USER1.BMCINST.JCLLIB                           
     
     Select one of the following installation actions:
     __   1. Select Products, Solutions, or Infrastructure
          2. Set SMP/E Data Set High Level Qualifiers
          3. Set SMP/E Data Set Allocation Values
          4. Set Installation Job Values and FTP Options
          5. Generate and Execute Installation Batch Jobs
     
     Select one of the following configuration actions:
     __   1. Set Runtime Data Set High Level Qualifiers
          2. Set Runtime Data Set Allocation Values
          3. Set Selected Product or Component Values
          4. Set Configuration Job Values
          5. Generate and Execute Configuration Batch Jobs
          6. Multiple SSID install for DB2 Products only (optional)
  2. On the Runtime & Other Data Sets panel, specify the requested information, and press Enter.

     BMIPCF10               USER1 - Runtime & Other Data Sets                     
     Command ===> ________________________________________________ Scroll ===> CSR  
                                                                                    
     Enter the Data Set HLQs for runtime data sets. Press enter after typing a value
     in the Quick Fill to set the other HLQs. Enter a '/' in the Quick Clear field  
     to clear the HLQs.                                                             
                                                                                    
     Quick Clear. . . . . . . . . . . . _                                           
     Quick Fill . . . . . . . . . . . . ______________________________            
                                                                                    
     Runtime Data Set HLQ (SMP/E content)                                           
       Product HLQ. . . . . . . . . . . ______________________________       
                                                                                    
     Other Data Set HLQs (non-SMP/E content)                                        
       Product non-VSAM . . . . . . . . ______________________________       
       Product VSAM . . . . . . . . . . ______________________________              
                                                                                    
     Low Level Qualifiers                                                           
       Change Values. . . . . . . . 1  1. Use BMC* LLQs (recommended)               
                                       2. Use BB/DB/IM/XX LLQs                      
                                       3. Customize the LLQs                        
     Optional APF Load Library                                                      
       Existing Load Library  . . . _____________________________________________
    1. In the Runtime Data Set HLQ and Other Data Set HLQs sections, specify HLQs.
    2. In the Change Values field in the Low Level Qualifiers section, select one of the following options for the low-level qualifiers (LLQs) for the product data sets:
      • Enter 1 to use BMC*.

        (recommended) All LLQs begin with BMC, followed by the type of library (such as LINK, SAMP, or PLIB). Examples are BMCLINK, BMCSAMP, and BMCPLIB. All products use the same set of libraries.

      • Enter 2 to use LLQs that start with product-line designators.

        LLQs begin with one of the following designators, followed by the library type:

        • BB for MainView and some performance products
        • DB for BMC products for IBM Db2
        • IM for BMC products for IBM IMS
        • XX for Infrastructure components

        For example, if you are installing a BMC product for IMS, the names would be IMLIB, IMSAMP, and IMPLIB. All products in the same product line use the same set of libraries.

        If you already have MainView products installed, use this option to continue using the naming conventions of your existing libraries.

      • Enter 3 to specify your own LLQs as described in Step 3.

        Best Practice

        Use this option under the following conditions:

        • You need total control over the naming of the runtime data sets.

        • You are installing a BMC Next Generation Technology - Db2 Utilities product.

      Note

      For the APPLICATION RESTART CONTROL products, regardless of which option you select, the LLQs are predetermined and cannot be changed.

      For information about target libraries, see Library names.

    3. (optional) In the Existing Load Library field, in the Optional APF Load Library section, specify an existing APF load library to use to consolidate all of the load libraries into one.

      This library becomes the runtime data set for the load modules only.

      Note

      All SMP/E target and user load modules will be copied here. Existing members in this library can be overwritten.

  3. (If you selected option 3 for the LLQs) On the Product Runtime Data Set Low Level Qualifiers panel, view the data sets that will be created, customize the LLQs according to your preferences, and press Enter.

     BMIPRTGR    Product Runtime Data Set Low Level Qualifiers 
     Command ===> __________________________________________________________________
     
     Verify Runtime data set Low Level Qualifiers. Press Enter to continue.
    
     Data Set                  Target     Default    New
      Type                     Suffix     Suffix     Suffix 
     -----------------------   --------   --------   --------
     CATALOG MGR DBRM LIB      ACTDBRM    BMCDBRM    BMCDBRM
     EXECUTION DBRM LIB        AEXDBRM    BMCDBRM    BMCDBRM
     HIGH SPEED APPLY LINK L   APTLINK    BMCLINK    BMCLINK
     DBC LINK LIB              DBCLINK    BMCLINK    infLINK
     XBM LINK LIB              XBMLINK    BMCLINK    infLINK
     POOL ADVISOR LINK LIBRA   PMDLINK    BMCLINK    prfLINK
     DB2 CMN UTILITY LINK LI   D2ULINK    BMCLINK    BMCLINK
     APPTUNE LINK LIB          IODLINK    BMCLINK    prfLINK
     WORKBENCH LINK LIB TARG   GUDLINK    BMCLINK    BMCLINK
     LGC TARGET LINK LIB       LGCLINK    BMCLINK    infLINK
     SAS 'C' RELATED           DIGB4LB    BMCLINK    BMCLINK
     MRE TARGET LINK LIBS      MRELINK    BMCLINK    BMCLINK
     SAS 'C' RELATED           DIGBLB     BMCLINK    BMCLINK
     COPY PLUS LINK LIB        ACPLINK    BMCLINK    utlLINK
     UNLOAD PLUS LINK LIB      ADULINK    BMCLINK    utlLINK

    Note

    You can specify up to four different LLQs per data type.

    Use the F8 or Enter key to scroll down the list, and the F7 key to scroll up the list.

  4. On the Runtime Data Set Allocation Values panel, specify the allocation information for the runtime data sets and press Enter.

     BMIPCF20         USER1 - Runtime Data Set Allocation Values                  
     Command ===> ________________________________________________ Scroll ===> CSR  
                                                                                    
     Enter the Allocation Values for the runtime data sets. SMS values will be used 
     if specified. Press enter after entering a value in the Quick Fill to set the  
     other Allocation Values. Enter a '/' in the Quick Clear fields to clear the    
     values in that column.                                                         
                                                                                    
     Quick Clear . . . . . . . . . . _         _         _         _         _
     Quick Fill  . . . . . . . . . . ________  ________  ________  ________  ______
                                                                                    
     Data Set Type                   STORCLAS  MGMTCLAS  DATACLAS  UNIT      VOLSER 
       Product Runtime Data Sets     ________  ________  ________  SYSALLDA  ______ 
       Product non-VSAM Data Sets    ________  ________  ________  SYSALLDA  ______
       Product VSAM Data Sets        ________  ________  ________  SYSALLDA  ______
       Product PDSE Data Sets        ________  ________  ________  SYSALLDA  ______

    You can specify SMS information or VOLSER information for the data sets. If you specify both, the Installation System uses the SMS information.

Was this page helpful? Yes No Submitting... Thank you

Comments