Selecting products to install

Use the following procedure to select the products, solutions, families, and components that you want to install:
  1. On the Execute Project panel, from the list of installation actions, select Select Products, Solutions, or Infrastructure and press Enter.

    BMIPPRJE                        Execute Project
     Command ===> _________________________________________________________________ 
     
     Project Name . . . USER1
     Description  . . . Sandbox                                
     JCL Data Set . . . USER1.BMCINST.JCLLIB                           
     
     Select one of the following installation actions:
     __   1. Select Products, Solutions, or Infrastructure
          2. Set SMP/E Data Set High Level Qualifiers
          3. Set SMP/E Data Set Allocation Values
          4. Set Installation Job Values and FTP Options
          5. Generate and Execute Installation Batch Jobs
     
     Select one of the following configuration actions:
     __   1. Set Runtime Data Set High Level Qualifiers
          2. Set Runtime Data Set Allocation Values
          3. Set Selected Product or Component Values
          4. Set Configuration Job Values
          5. Generate and Execute Configuration Batch Jobs
          6. Multiple SSID install for DB2 Products only (optional)
  2. In the Cmd field of the Category Selection panel, enter the S (select) line command next to the type of products that you want to install, and press Enter.

     BMIPCTD                       Category Selection                               
     Command ===> _________________________________________________________________ 
                                                                                    
     Select the categories for the products and solutions to be installed.
     Press Enter to continue or F12 to go back.   
    
     Line Cmds: Select
                                                                                    
     Cmd  Product and Solution Category                
     ---  ---------------------------------------------------- 
      _    BMC AMI AIOps                    
      _    BMC Data Management for DB2                                             
      _    BMC Data Management for IMS                                             
      _    BMC Mainframe Cost Optimization                                         
      _    BMC MainView Products                                                   
      _    ALL Products                                                            
     ******************************* Bottom of data ********************************

    Tip

    If you are unsure which category to select, select ALL Products.

  3. In the Cmd field of the Product Selection panel, enter the S (select) line command next to each product and solution that you want to install, and press Enter.

     BMIP004           USER1 - All Products                                        
     COMMAND ===> _________________________________________________________________
                                                                                    
     Select the products and solutions to be installed. A '+' in the Sub column     
     indicates an included subcomponent can be deselected. Press Enter to continue  
     or F12 to backup.                                                              
                                                                                    
     Line Cmds: Select, Expand, Info                                                
                                                                                    
     Cmd  Sub  Products and Solutions                     Version  PCode            
     ---  ---  -----------------------------------------  -------  -----            
      _        Administrative Assistant for DB2           11.1.00   AAD             
      S        ALTER for DB2                              11.1.00   ALU             
      _        APPLICATION RESTART CONTROL DB2/IMS/VSAM    4.0.00   ARX             
      _        Backup and Recovery Solution for IMS        4.6.00   BRI             
      _        BMC Application Accelerator for IMS         1.2.00   IBO             
      _        BMC APPTUNE for DB2                        11.1.00   ASQ             
      _        BMC Change Mgmt Family for IMS              2.6.00   T85             
      _        BMC Communication Mgmt Family for IMS       2.6.00   T86             
      _        BMC Database Admin Family-DB2 z/OS         11.1.00   T71             
      _        BMC Database Advisor Family for DB2 z/OS   11.1.00   T72             
      _        BMC Database Advisor Family for IMS         2.5.00   T79             
      _        BMC Database Integrity Family for IMS       4.9.00   T82             
      _        BMC Database Manager Family-DB2 z/OS       11.1.00   T70             
      _        BMC Database Perf Family for IMS            4.9.00   T69             
      _        BMC Discovery for z/OS                      1.7.00   MDZ             
      _        BMC DB Perf for Fast Path Family for IMS    1.8.00   T80             
      _        BMC High Speed Utilities for DB2           11.1.00   BHU             
      _        BMC Impact Integration for z/OS             1.6.00   BIZ             
      _        BMC Intelligent Capping for zEnterprise     2.0.00   DYC             
      _        BMC Internet Service Retrieval              1.5.00   BMR             
      F1=Help    F3=End     F7=Up      F8=Down   F10=Expand F12=Backup

    Tip

    To scroll through the list, use F8 or Enter to scroll down, and F7 to scroll up.

  4. When you have finished making selections on the Product Selection panel, scroll to the bottom of the list and press Enter.
  5. If you are prompted to install additional products or components that are associated with your product selections, indicate your preferences:
    • If an additional panel is displayed (such as the example below), enter Y to install the specified product or N to omit it, and press Enter:
       IPTP001 ----------------- BMC System Administration for IMS ---------
       COMMAND ===> ______________________________________________________________
      
       You have chosen to install BMC System Administration for IMS
      
       Would you also like to install DELTA IMS: Y  (Y/N)
      
      
      
      
      
      
      
      
      
      
      
      
      
      
      
           Press Enter to continue or F12 to go back.
    • If you are installing a product that requires the BMC Runtime Component System (RTCS), respond as follows when you see the Install System RTCS Deselection pop-up:
      • If you already have RTCS installed and want to continue using it, deselect the component and press Enter.
      • If you do not have RTCS installed or want to reinstall it, enter S or / next to the component and press Enter.

      Note

      If deselecting the option, ensure that you have RTCS at the current maintenance level before continuing with the installation. If you are unsure of your current installation, BMC recommends installing RTCS.

      +-------------------------------------------------------------+ 
      | BMIPDSEL       Install System RTCS Deselection              | 
      | COMMAND ===>                                                | 
      |                                                             | 
      | Enter an 'S' or '/' to select the RTCS component for        | 
      | installation.  If you do not wish to install the RTCS       | 
      | component, do not select it.                                | 
      | Press Enter to continue.                                    | 
      |                                                             | 
      |                                                             | 
      | Select    Component                       Version           | 
      |   _       Run Time Components System      02.1.00           |
      |                                                             |
      |                                                             |
      |                                                             |
      |                                                             |
      |                                                             |
      |                                                             |
      +-------------------------------------------------------------+
  6. When the Install System Selected Products and Solutions panel lists your selections, review the list and take one of the following actions:
    • To change a product or solution, press F12 to return to the selection panel.
    • If the list is correct, press Enter.

    Notes

    • If the mix of products you select results in duplicate items being listed, only one instance of the item is installed.

    • After pressing Enter, one or more messages might display with additional information for the items you have selected. For more information about the content of these messages, see the administration or customization information for the associated items.

     BMIP01A          Install System Selected Products and Solutions                
     COMMAND ===> __________________________________________________________________
                                                                                    
     Below are the products and solutions that were selected for installation.      
     If these are incorrect, return to the Product and Solution Selection Screen    
     to reselect.  If correct, press Enter to continue or F12 to go back.           
                                                                                    
                                                                                    
     Products and Solutions                        Version   Release Date           
     BMC Intelligent Capping for zEnterprise       1.1.00    December 2014
Was this page helpful? Yes No Submitting... Thank you

Comments

  1. Chris Forzaglia

    What about duplicates. Something should be mentioned here about duplicates: MainView Automation 6.3.00 June 2018
    MainView AutoOPERATOR 8.1.00 December 2016 MainView Automation Family-MF 7.4.01 December 2015 MainView AutoOPERATOR 8.1.00 December 2016 MainView AutoOPERATOR 8.1.00 December 2016

    Aug 15, 2018 03:17
    1. Dottie Wood

      Hi, Chris. If you select a mix of products that causes duplicate instances of an item to be listed, only one instance is installed.

      The writer who is responsible for this content will add this information to the topic for the next release. Thanks for your input!

      Aug 16, 2018 01:20
      1. Chris Forzaglia

        Thanks!

        Aug 20, 2018 10:09
  2. Chris Forzaglia

    Got this message:

    The product mix selected for installation includes the MainView
    Infrastructure component. Beginning with the v6.1.01 release of MainView Infrastructure the DBC and NGL components will also be
    installed and configured with MainView Infrastructure.

    Nothing explains what these two components are…

    Aug 15, 2018 03:31
    1. Dottie Wood

      Thanks for the feedback, Chris. We have forwarded it to the writer who is responsible for this content.

      Meanwhile, for more information about the DBC infrastructure component, see “Working with DB2 Component Services (DBC)” in the MainView Administration Guide. You can use the navigation pane on the left to navigate through the associated topics.

      Aug 16, 2018 02:05