Maintenance outage for upgrade on Sunday, September 22

This site, docs.bmc.com, will be inaccessible for two hours starting at 8 AM CDT, Sunday, September 22, for a platform upgrade.

    Page tree
    Skip to end of metadata
    Go to start of metadata

    Consult the following schematics for information about the various ports used by TrueSight Infrastructure Management. The port numbers provided in this topic are based on a default implementation.

    Related ports
    For detailed information about all the network ports required for BMC TrueSight Operations Management components, see Network ports.

    Ports used in an Infrastructure Management deployment

    The following figure illustrates a typical high-level logical architecture for an Infrastructure Management deployment using multiple Infrastructure Management Servers. The same ports are used in a single Infrastructure Management server deployment. The arrows indicate the direction from which the connections are established.

    Ports used by Infrastructure Management system components for network communication


    *The RMI port is an out-of-the-box dynamic port. See Setting the RMI port for more information.

    Setting the RMI port

    To add or update the RMI port information, perform the following steps:

    1. Access the <Infrastructure Management install directory>/pw/jboss/server/minimal_jms/conf/jboss-service.xml file.
    2. Add or update the following entry:

      <attribute name="RmiPort">2100</attribute>

      Port 2100 is an example. You can specify any available port number.

    3. Restart the Infrastructure Management server.
    4. Repeat the above steps for all Infrastructure Management servers connected to a Presentation Server.

    Ports used in BMC PATROL data collection

    The following diagram illustrates the default ports on which connections are made regarding communications from the BMC PATROL Agents through the Integration Service to the Infrastructure Management Server. The direction of the arrows indicates the connection requests.

    Network communication ports used in data collection from PATROL Agents

    The BMC PATROL Agent can forward events to its consumers through two channels:

    • Channel through the Integration Service—In this channel, an event shares the same channel that is available for data streaming. All the events that are triggered and filtered to pass are routed through the Integration Service. The event response acknowledgement is implemented in the BMC PATROL Agent to guarantee the delivery of the event to consumers, which in this case is Infrastructure Management.
    • Separate Channel through IMGW—In this channel, an event is pushed to the Server Cell that uses propagate rules to forward the event to one or more destination cells or gateways. The BMC PATROL Agent has a dependency on the IMGW library interface for the message acknowledgement mechanism. Guaranteed delivery is available only between two peer IMGW interfaces.

    Ports used by the Infrastructure Management administrator console

    The following diagram illustrates the connections between the administrator console and other Infrastructure Management components. The ports listed in the diagram are default ports and the arrows indicate the direction of the connection requests.

    Network ports used by the administrator console to communicate with Infrastructure Management servers

    Ports used by the Infrastructure Management and Reporting databases

    The following diagram illustrates the connections between the Infrastructure Management database server, the Infrastructure Management Server, the BMC TrueSight Operations Management Reporting Server, and the Reporting Engine Server. The ports listed are default ports and the arrows indicate the direction of the connection requests.

    Network ports used in database-to-server communication between Infrastructure Management and Reporting


    Ports required to integrate Infrastructure Management with BMC Atrium CMDB

    Ports to enable Infrastructure Management and Reporting database integration

    ComponentDefault port numberProtocolFunctionDefault statePort configurable
    Infrastructure Management Server
    Agent Controller12123
    12126 
    TCP

    Agent Controller listens for JServer on this port.

     

    EnabledDuring installation
    Admin Cell1827TCP EnabledNo
    Event Cell1828TCP EnabledNo
          
    Report Engine server
    Report Engine server3783TCP EnabledNo
    Infrastructure Management Database Server
    Database listenerOracle: 1521TCP Enabled 
    SAP SQL Anywhere: 2638TCP Enabled 
    TrueSight Operations Management Reporting Database Server
    Database listenerOracle: 1521TCP Enabled 
     SAP SQL Anywhere: 2638 TCP Enabled 
    BMC Server Automation port       
    BMC Server Automation port9843 

    BMC Server Automation port

     

    EnabledDuring installation

    Ports to enable integration with Atrium CMDB

    ComponentDefault port numberProtocolNotesPort configurable
    Infrastructure Management Server
    pncell1828TCP  
    gateway.imcomm1839TCP  
    gateway.ibrsd3115TCP

    Used as a gateway from the cell to Integration for BMC Remedy Service Desk***

     

    During installation
    JNDI1100TCP  
    smmgr TCPTo configure smmgr, configure the ServerPort parameter inmcellHome/etc/cellName/smmgr.confYes
    BMC Atrium CMDB
    TCD specific port  To configure the TCD specific port, configure the C:\Program Files\BMC Software\ARSystem\Conf\ar.conf file. 
    Plugin port  To configure the plugin port, configure the C:\Program Files\BMC Software\ARSystem\Conf\ar.conf file. 
    Cell1828TCP  
    UDDI7777 

    BMC Atrium CMBD port

     

    During installation
    TCP (Notify plug-in)1840   
    BMC Atrium Web Services
    UDDI  To configure the UDDI port, C:\Program Files\BMC Software\AtriumCore\shared\tomcat\conf\server.xml 
    Integration for BMC Remedy Service Desk**
    TCP3115 Must be configured on BMC Remedy AR Server 
    TCP1828 Must be configured on BMC Remedy AR Server to communicate with the cell 
    Other ports 1828 – 1840   

     

    Port configuration

    You can configure some ports during the installation and some only after the installation of the Infrastructure Management Server.

    For information about securing port communication, see Internal port communication for Infrastructure Management Server.

    Related topics

    Network ports

    Deployment use cases and best practices for Infrastructure Management

    Updating port numbers to change the Apache HTTP port 80 default

    Ports that can be configured after installation

    Ports that can be configured when installing Infrastructure Management

    3 Comments

    1.  

    2.  

    3.